How to cool the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Graphics Card
Вставка
- Опубліковано 4 сер 2024
- In How to cool the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Graphics Card in this Step By Step Guide, We walk through controlling RGB lighting, fans and more.
Learn how to Install the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING here: • RTX 3080 TI - Installi...
Check it out on on my Amazon Affiliate link: geni.us/8rfws
I hope you can find a 3080 Ti in stock
0:00 Intro
0:30 Downloading EVGA Precision X1 to Cool down and Controlling the RGB colors on your card
1:21 Updating the firmware on your EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Graphics Card
2:07 How to control RGB Lighting on the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Graphics Card
5:13 Changing the Multi-GPU Fan Control Fan Speed on the RTX 3080 Ti
11:20 Working with the Fan Curve for the RTX 3080 Ti
16:21 Going over overclocking features of the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Graphics Card
16:35 Discussing everything we went over in this video for the EVGA RTX 3080 Ti FTW3 Ultra
🔥 Check out my full build on my Amazon affiliate links
🔥 EVGA Geforce RTX 3080 TI FTW3 Ultra: geni.us/8rfws
• Elite ID referral link: www.evga.com/member/elite/?re...
• AMD Ryzen 9 5900X Processor: geni.us/RFOT8
• ARCTIC Liquid Freezer II 420 Water Cooling: geni.us/vwB8B
• MSI MEG X570 ACE Motherboard: geni.us/3u4Pu
• 2 x Thermaltake TOUGHRAM RGB DDR4 4000MHz 16GB: geni.us/eNhKNph
• Corsair 7000D Airflow: geni.us/MMPS
• Sabrent 1TB Rocket 4 Plus NVMe 4.0 Gen4 PCIe M.2: geni.us/fE01
• SAMSUNG 870 EVO 1TB SSD: geni.us/08Be
• EVGA SuperNOVA 1000 G+ 80 Plus Gold 1000W: geni.us/IVoE
• GIM White 120mm 3 Pack PWM RGB Case Fans: geni.us/LL0eAFd
• GIM 24 Pin RGB Extension Power Supply Sleeved Cable: geni.us/myFccjM
🔥 Anidees AI Aureola Duo 140mm 3pcs RGB PWM Fans x 2 Kits: geni.us/pAZ1
✅ I use Tubebuddy and Morning Fame to optimize my channel and you can too, check out my Affiliate links here:
✅ TubeBuddy: www.Tubebuddy.com/ThisBytesFo...
✅ Morning Fame: morningfa.me/invite/giomvqhb
🔥 Like what I do, you can make a single donation here: www.buymeacoffee.com/ThisByte...
Here you will learn how to cool the EVGA Geforce RTX 3080 Ti Gaming Video card and how loud the Geforce RTX 3080 Ftw3 Ultra Gaming can be and more. Want to learn the basics on Precision X1, this is the guide for you and settings your fan curve. We will give you some 3080 TI Cooling tips, with thie 3080 TI Setup Cooling and help you with the EVGA RTX 3080 TI FTW3 temperature.
You can find your copy of EVGA's Precision X1 here: www.evga.com/precisionx1/ . This will not only help cool your card, but it will also help you overclock it, set fan curves enable and change RGB LED's if your card has them and monitor your temperatures, fan speeds, core and memory speed and even provides an OSD so you can see all the metrics while you play. EVGA GeForce® RTX 3080 Ti 12G-P5-3967-KR
If you would like to purchase something through the Affiliated Amazon Store for ThisBytesForYou, use the link below. Using this link will help the channel grow to bring you more.
✅ Here is Global Amazon Affiliate link: geni.us/APnY buy from our link and help our channel. Don't worry, it wont make anything cost extra, regular prices are there.
✅ Don't forget to check out and follow my other social media channels:
🔥 Buy Me a Cup of Coffee: www.buymeacoffee.com/ThisByte...
🔥 Facebook: / thisbytesforyou
🔥 Twitter: / thisbytesforyou
🔥 Reddit: / thisbytesforyou
🔥 Instagram: / thisbytesforyou
🔥 Tumblr: www.tumblr.com/blog/thisbytes...
🔥 Pinterest: / thisbytesforyou
🔥 LinkedIn: / thisbytesforyou
this bites for you
#ThisBytesForYou
#3080ti
#NVIDIA
@TEAMEVGA
@NVIDIAGeForce
@corsair
As an Amazon Associate, I earn from qualifying purchases.
~-~~-~~~-~~-~
Please watch: "Your Gaming Chair and Floors NEED These!"
• Change your wheels quick!
~-~~-~~~-~~-~
#Sponsored - Навчання та стиль
Watched some of your vids when I ordered my 3080 TI ftw3 and I felt good about the purchase. Now that I have it I love it, and love seeing that you keep putting out the 3080 TI ftw content.
awesome bud, I am so happy I could help you and continue to help you. I have a few more planned on this, so please stay tuned. Are you have any issues on it or questions about it?
@@ThisBytesForYou no issues, I have done some over clocking and got some good scores. I also got the anti sag bracket for it and it looks sharp. Great card for gaming and VR.
thanks bud, I will be making a video on different anti sag brackets, maybe to release monday, not 100% sure, I am just so backed up, but I will try.... VR.... hmmm, I may do something on that too.
@@ThisBytesForYou hello can I ask a question? but is it necessary to have separate 3x8pin? i have a power supply which only has 2 gpu outputs and i connected the gpu with 1 x 2x8 pin cable and 1 x 1x8 pin cable. okay anyway? thank you
@@ThisBytesForYou i would also like to ask you, if you are overclocking expert, i put bios OC, i tried to put some coreclock + 100mhz, but the gpu doesn't go beyond 1950mhz boost frequency, it really should go to 2050mhz, but it goes for a few seconds and then it comes back. i ask you why i'm waiting for the waterblock ek, and i'm not used to having the air-cooled gpu, and my thought is that it swings so why the weakening comes in due to the temperature, possible? thank you
This was actually super useful. Nobody else covers this app like this that I have found so far. My fans were not turning on at all and I had been sitting at 54°C wondering when they'd kick in.
Now I'm chillin at 27°C after watching how to set fan curves
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Thats why I made this video, I hate the 0db feature they have, that the fans turn on only when it hits 60°C, I think it's stupid, I want my fans to always be on keeping it nice and cool, maybe not spinning so quickly, but still on, if they are off, then kick on, you hear a little click, and that is even more annoying, to me at least. So happy I could help you.
That is by design though with the normal non-overclock bios. It's designed to fan stop below a certain temperature to allow your PC to be silent whenever you are not gaming. The idle temp will sit around 50 - 55c during fan stop and that's perfectly fine. Having the idle temp drop to 27c with fans on really makes no menaingful difference as it's only cool like that at idle. Once you game, temps will be similar between both bios options except for the OC bios will attempt to push higher clocks by allowing more power. Having said all that, I personally just run the normal bios and then enable a fixed fan speed of 33% which keeps the idle temp at 30c and climbs to between 70c and 80c in gaming depending on which game it is. I think fans ramping up and down with different load is far more annoying than anything else. And anything above 50% is plain loud and annoying.
But maybe he prefers it to be cooler, my videos gives people options that might now know. Personally I don't want my fans off at all but running slowly at least.
Man thank you so much I was so worried because over the months I have seen my gpu temp going up and these past weeks I have seen climbs like never before I was up in the 80s when gaming in competitive shooters like apex and Warzone even idle I was sitting in the high 50s and with the aggressive switch it has cooled the gpu down. Thank you sir. 😊
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Another thing that helps TONS is your case cooling see if this will help as well: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
Thank you for this video, had this card over a year and had heating issues and had to undervolted through MSI afterburner to get the temps down to 80 when playing games. Didn't even know about the software as this was the first PC I have built so appreciate the help and you got a subscriber out of me!
Well awesome my friend, so very happy I could help you and thanks so much for your kind words and support, it means the world to me. Yeah I never recommend undervolting, it can cause so many issues so I am so happy this could help you. This video will help you too: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
And I have almost 500 videos, I am sure I have more that cane help, but if you find I am missing something, if it makes sense I can make it, just let me know.
Just bought the 3080 ti ftw3 ultra, tysm for your quality content so I can get my fan curve set up!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Thank you! I just bought one for 1149.oo on 7/11/2022 and I found your video to help me monitor and control the speeds. Thank you! Thumbs up GREAT!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou I got to re watch your video to learn how to get the X1 software to accept and follow my fan curve. I set the fan curve so the fans come on a little stronger at 65 to 75c but in real time it's not doing that. I got to re watch your video to see if I missed checking a box or maybe I didn't hit apply or save.
im so glad i came accross ur channel!!! this video was very helpful then others i watched!!
awesome my friend, so very happy you are enjoying my videos, please let me know if there is anything I a missing you are looking for, if I don't have it, i might make it if it makes sense.
My 3080 FTW3 Ultra sits at 54c idle before this video and is now at 30c! Really appreciate it man
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. here's another you may like, and might actually preferer: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
Just bought a EVGA graphic card and this helped a lot, thanks!
Awesome my friend, so very happy I could help you.
Damn this was really detailed Iggy. Great stuff!
Thanks buddy, I really do appreciate it
Appreciate the tidbit about updating firmware!
always a pleasure my friend, actually that part is incredibly important and would help as well in temperatures since they regular voltages as well.
Awesome and insightful. Answered my questions up front with real time examples. Thanks.
-a new subscriber
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I just bought my EVGA 3080ti FTW3 and your channel has been so amazing with all these guides. Definitely earned my subscription ✨👌🏼🙌🏼
awesome bud, thanks so much for your kind words, it means the world to me and thank you so much for your support. I am so happy I could help you.
thank you your videos are good and i find them useful
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Got a evga 3080ti ftw3 an was having a problem with the temperatures rising to 75c and this helped a lot thank u
Always a pleasure my friend, so very happy I could help you. If you haven't already, please consider subscribing, I come out with videos just like this every week and with almost 400 videos, I am sure I have something else you might need. If not, let me know, if it makes sense, I might make a video out of it. Thanks for giving me the opportunity to help you out.
im haveing same prob allmost hit 80 im gonna try this
@@thecrimsonops How did it go for you?
Thank you!!!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hey man I have the same case as you, under a good load mine is getting up to 80c at some points, and that seems awfully high, I’m just curious what your average temps are on the high end? And do you think these cards are able to safely handle that type of temperature?
So that I can help, please list the manufacturer and exact model number of the following components:
1. Motherboard - manufacturer and exact model number
2. CPU - manufacturer and exact model number
3. RAM - manufacturer and exact model number
4. Video Card - manufacturer and exact model number
5. Power supply - manufacturer and exact model number
6. Monitor - manufacturer and exact model number
Redundant I know, but many people forget to enter manufacturer and exact model number
7. Do you have ALL of the PCIE connections plugged in, and not daisy chained or pigtailed, each coming directly from the power supply?
8. Are you running through HDMI, DP, DVI, VGA, any adapters?
9. UEFI in the BIOS from Legacy. If it was set to Legacy, you will need to reinstall windows to get correct support.
10. Disable CSM in the BIOS
11. Installed latest supported chipset driver?
@4:32 when you plug in the fan to your gpu,
Would I be able to plug in my 360mm ROG LC AIO fans into that spot and control the the RBG as well?
I have not tested it but, I would not, I would HIGHLY recommend against it, keep it for a single fan alone.
Outstanding videos! Thanks!
Fair winds and following seas to all.
So very happy you enjoyed it my friend, thank you so much as well for your service. I was signed up to go to the Marines, but I got hit by a car as a pedestrian and went into a coma, I received brain surgery and a host of other things, so sadly I could not go off to boot camp. It would have been great though, thanks again.
@@ThisBytesForYou I have no doubt that with your attention to detail, you'd have been a good Marine. Ooorah! Consider the possibility that reincarnation exists. I'm returning somewhere in the multiverse as a Space Force Marine. Maybe I'll see you there.
Fair winds and following seas.
@@GySgt_USMC_Ret. hahah nice, that would rock, see you on the flip side ;)
@@ThisBytesForYou Hey, Jarhead. Thought you might be interested. I received my EVGA 3080Ti XC3 Ultra this past Monday and as I opened it on the kitchen counter, a small piece of something landed on the counter top. It's a silver looking color, about 1/8th inch wide, less long and has a definitive shape like maybe a component used on a circuitboard. Took a picture, opened a service ticket and requested an RMA replacement. It is possible that it was just "fluff" from the factory during packaging, but I'm not comfortable with installing it. Wish me luck. Best to all.
Nice video !! Regards from Chile.
Awesome my friend, so very happy you stopped by and enjoyed the video, Chile, always wanted to go there, my first girlfriend was from Chile, sounded like an awesome place
@ThisBytesForYou Question! I just got this card, what are the best undervolt settings? Also EVGA's product page is saying Total Power Draw : 350 Watts, but if you look at techpowerups review they have it at 434 Watts while gaming, i have an EVGA SuperNOVA 750watt G3 power supply and i am concerned if it will be enough, i thought maybe if i undervolted and/or set a lower power limit i would be fine?
smart of you to be concerned my friend, on EVGA's site it states a Minimum of a 750 Watt power supply, Minimum... That means the system it was tested with had the basics, one drive, a standard processor, motherboard, 1 or 2 sticks of ram and that's about it. In the real world, systems have 2 or more drives, a decent CPU, 4 sticks of RAM, and maybe some other extra's even worse if you are overclocked. Also, this has 3 PCIE 8Pins, NVIDIA recommends that you plug in one PCIE cable each, not daisy chained, which is horrible. On the EVGA forums its a mixed choice, but I say you can't go wrong with 1 per 8Pin, I use a 1000Watt G3.
As for undervolt, I don't use that yet, i may test it at some point but I am so backed up on reviews, make sure you are subscribed and have the notification bell clicked (a like doesn't hurt either ;) ), I think you may enjoy this mondays video, stay tuned my friend.
@@ThisBytesForYou Thank you sir! subbed and notifications are on :) love the channel and glad i found it!
thank you so much my friend, it means the world to me and I am so very happy you enjoyed my videos and found them beneficial. If you have any friends as well that need some help, please feel free to share my videos and so very happy to have you here.
I just bought this card and was worried that it was running extremely hot. I uninstalled MSI afterburner and installed precision X1. My card was running at max, but then I realized that I had not changed it to normal in the Nvidia control panel. I've been playing RDR2 at ultra and it really makes this card work. Going to make these changes and hopefully, things will work out. I appreciate your guide. It was thoroughly informative. If you're ever in the Boogie Down Bronx, I'll be happy to get you a cup of Cafe.
Thanks bud, I go up every so often, I have family in queens, though i think they moved to the country side, not 100% sure, I live in Virginia. always a pleasure my friend, I love to help and I am so happy i could help. The 3080 TI is a beast, EVGA' clamps it down as the ultra powerful FTW3, and its such a great card. Thanks my friend, and i hope to see you around some more of the videos here.
What was your card running at? My card limit it 83c but I have seen it hit 86c
Some posters have said their card has never seen 70c
Can’t figure out why my card is running so hot.
@@budgetcon9611 My card maxed out at 73C which seems normal, but just felt hot to me. After Precision X it maxes at 66 at max settings.
You're good my friend
@budgetcon you can see it all in the video and you are running hot surely because of your ambient cooling
Are those fan headers on the back of the card? Does it keep the fancurve after restarting if I don't reopen precisionX? can I close/quit precisionX and keep the overclock settings/fan curve - it is hard to tell just by listening.
Have you watched the video?
thanks for this , i just built myself a pc n a member of a group i'm in was saying i should undervolt it which was kinda gibberish to me , knowing what these built in setting do is at least helpful, i'll probably toss it on aggressive instead of playing with everything.
well, problem is undervolting is trendy right now and it will be for a little longer, I don't undervolt. Undervolting is actually nice, but is lowering the voltage where the product might need to be, so you might experience random bluescreens and such, sometimes you won't hit that bluescreen for a long time and then people blame it on other things, not their overclock (undervolting is also considered overclocking). Also, this is another video you might want to check out, it could help you tons. ua-cam.com/video/J5m5WBlPkfc/v-deo.html
I just bought one of these! Glad I found your channel, nice work!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you and thank you again for your support and kind words.
Same boat as you just ordered one last night. Even though I usually get strix cards I’m not paying 200-300 more plus evga has the best support of any gpu company. I liked the aorus card but gigabytes customer support is about as good as asrock( non existent)
@@ChadKenova You can't go wrong with EVGA
@@ThisBytesForYou I was freaking out over the temps then I found this video! Thanks again for the guide! Temps are as cool as can be! :)
@@DisforDamion87 awesome my friend, so very happy I could help you, it is completely my pleasure
Are you sure you're not a robot there's just no stopping you.
Keep. Em. Coming Iggy.
Keith
thanks buddy, beep, boop, burrrrr, puh ting....
love all your vids for this card it helped me out with buying a card and knowing how to set it up properly. wondering if you would ever do a best overclock settings for the card
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. AS for overclocking, I dont like doing those because my overclock may not match yours, then I have to support that, and it could go on for days. You and I could have the same exact card, but yours may not overclock with the settings I have, or vice versa, it is insane.
@@ThisBytesForYou thanks for the reply and ya that all makes a lot of sense. im loving my 3080ti so far was a little sad i had to spend almost $3,000 for it tho but i had to after my 1080 broke
@@legionofthecreed just remember, you can't take it with you, so sometimes just enjoy it, the money I mean and save when you can, if that $3K made you happy then it's 3K well spent, good stuff my friend ;)
hi there, i have noticed your fans are spining 37% @ auto settings. I am using EVGA 3080 FTW3 and at the same settings, my fans dont spin and GPU reaches 50-60c. Is that a concern?
I was playing around a lot with the fans and fan curves during the video, but for the to start spinning at 60c is 100% normal. Make sure you update the firmware on the cards as well.
Do i always need to have the x1 program running for the fans to function or will they remember what settings i chose between boots?
sadly you need to have it running, just have it start with Windows Minimized.
As far as I know, you can max the voltage slider as well. It doesn't actually increase the voltage, it just gives the card the ability to increase it as needed in an overclocking situation for example. I got this information from another video I watched almost a year ago, what do you think?
yes, you can raise the slider without risking killing the card, but it does freak me out still hahah. Its not that it pushes that much voltage through it, its that it allows you to utilize that much voltage safely.
I have a 5950x ,Kracken x72 cooler, x570 crosshair viii hero mb, 4x8gb 3600mhz ram, 2 1tb nvme gen 3 ssd’s, strix 2080ti, and 6 140mm fans with an evga p2 750 watt psu. But I’m scared it won’t be enough for the evga ftw3 3080ti especially if I overclock the cpu and gpu. What kinda full system power draw are you getting? I think it would be fine it’s a quality psu but I’ve also thought about picking up a 12900k so I might just get a 1000 psu.
The card requires a 650Watt power supply, in a full system (not 650 on its own) on a 5950, I would think you would be pulling close to 500Wattsm but you would be playing with the efficiency. I will be building a new system very soon on here, I will take you along for the ride, stay tuned and in there I will do some power reading as well. For me, I always go 1000Watts or higher, sure it might be too much today, but I bought my 1200Watt 10 years ago, never had to replace it, people that buy just what the card needs, upgrade every year or so, save money and go bigger.... although with newer cards on the market in september, they may introduce a new connector, which there are adapters for, but I will see what they have then.
was wondering why this card was at 55 C while idle now its at 25 C thank you so much!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
this might be a stupid question but I figure I ask any way will having higher fan curves kill the fans faster in terms of longevity?
Not a stupid question at all, that is a potential but one that we might share, the noise doesn't bother me, I prefer to have my card cool. But if your fans need to be running so fast all the time to keep them cool, you have other thermal issues. What is your ambient temperature in the house?
I know I’m late to the party here, but I’ve been messing with X1 on a new build and my fan curves won’t stay applied when I exit the program. Is that normal behavior?
sadly that is normal, and you are never late my friend, always happy to help. Just minimize it and you should be good.
Would it be possible to have an
External gpu enclosure let's say a 3090, while also having another 3090 installed on pc. I heard about sli but I think they have to be same card to work.
Would that work? Or would only one card be used for gaming ? I want to use it for Microsoft flight simulator vr
Thanks again
you could, but SLI would not work through that as SLI is based off of a licensed NVIDIA chipset, and SLI doesn't really work anymore.
Good video. Very helpful
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou good luck to you and your channel in the future.
thanks so much my friend, I truly appreciate your kind words
Is it normal for the GPU fan to stop spinning when your Pc is on idle, my 3 fans only kick in when I play games or run a heavy benchmark like 3Dfiremark. ( Running a RTX 3080ti EVGA) kinda Weird how it’s able to maintain a 40 to 46 degrees on idle with out the fans spinning, lmk if this is normal or not
Yes, it is completely normal, but I dont like it like that, I want it to always be cool.
Cool video, so I have a question about the power cables that connects into the GPU. I have the same graphics card as you and there are three eight pin slots. So you mentioned not to daisy chain that power supply cables. What do you mean by that and what happens if you do? I think I have 2 (6+2) pins cables and 1 pcie splits in 2 (6+2) heads.🤔 how do I find the right cable for the power supply to break it into three separate cables?
If you have 3 cables, then you have 3 PCIE connections, if you have 3 cables and those cables extend to more cables, don't use the extensions. Thats like having a straw and you want to share the drink with your friends, so you pop a hole in your straw and have your friends put their straws in the hole and you all drink... you are going to get less drink and so are they.
So, I went ahead and update the firmware, and adjusted the fan speed on the card. The temp has not gone over 55 degrees. I should adjust lower right? Or is that good?
Great info. Thank you kindly!
so it's a little hotter than mine, but it should still be good. You need to make sure you have good overall cooling in your system, also I like to keep my house nice and cool, usually at 63°F (17.2°C) so that helps cooling tremendously. The cooler the ambient temperature is, the cooler your system will be.
I have the same card you are using in the video. My ambient temps in my house are usually around 23c. I know I have a pretty bad case for airflow so I sometimes have to take the glass panels off to reduce temps (NZXT H510 Elite) even with the glass panels off under 99-100% GPU load my GPU temp sits at around 81c highest I have seen it is at 84c. Is this safe for this particular card? I have been looking for the manufacturer temp information for this card but I have not been able to find it. Any information would really help and or suggestions. I have only the case stock fans in and I have an air cooled CPU Ryzen 7 5800x. Noctua NH-U12S
I am usually at 17c, I like it nice and cold, so does a PC. While 23c is not bad, it gets amplified inside of a case, since depending on your fan positioning and the amount of fans you have, hot air is being trapped. While I have an H510 in the box, I haven't touched it yet, it looks like a thermal nightmare, every one I see has to remove side panel, probably better to remove the front glass, horrible design. As long as you have 2 fans in the front, blowing air in, a rear fan sucking air out and the top fan sucking air out... you should be ok.
I am in the process of making a bunch of videos, but I will be making one for the 3080ti like this, this will help you and it will also update the firmware on the card: ua-cam.com/video/uO351_LhGh8/v-deo.html, let me know how it helps.
@@ThisBytesForYou If I had a house that was 17C all the time... I would move...
@@lesgarten sucks for you I guess, I love it
Thank you so much for doing this video. I picked up this gpu because it was way below msrp. Until the new 4xxx series come out. So thank you again. Just to let you know, when I first booted up the pc this Sunday. It did not post and then I realized I should take out the hdmi cable and put in DisplayPort and try again, and BAAAAM it posted. I was over the moon. I was so nerves turning on the pc for the first time. Thinking I messed up something for sure lol. But everything went so smooth for my first pc build :)
ahh good stuff my friend, and awesome that you commented here, this video actually will help you with that issue, its a firmware issue, so this will help you. So very happy I could help you my friend, it means the world to me that you let me know as well.
@@ThisBytesForYou You are so welcome :) I thought for sure I would have to rip my pc apart to find the issue, why it didn’t post right away. So right away I thought to myself. Maybe the drivers are not install for the hdmi port. Why it didn’t post. So at the end I changed the cable to DisplayPort and it worked. So now I know for next time not to plug hdmi on the first boot. Until all updates are done :)
@@ThisBytesForYou so happy I went with 3080ti instead of 3090 :) saved myself a whack of cash to put towards the new gpu.
I have both, the 3090 is only slightly better, the 3080 TI is a much better value.
@@ThisBytesForYou which one is louder?
Thank you thank you thank you
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hey man love the content 🔥
Quick question is Undervolting safe ?
I have 3080 ti evga XC3
Supposedly, but I wouldn't recommend it. You have to imagine, people much smarter than us on this front have carefully made these changes in the firmware to make everything work perfectly. They have tweaked and tuned everything to not only work, but maybe be a little ahead of what is expected to catch the unexpected, many times that it why the voltage is a little higher. Many times lower the voltages helps cool down the card, but for some reason now you are getting weird bluescreens and many people blame the card, but it is infact what they have done to the card that has caused the issue. My recommendation is to leave it alone, provide the card with adequate cooling and you will be fine. Thanks so much for your kind words and I hope I have helped.
Hello, can the arg lights of the 3090 graphics card be synced with the armory crate program?
Hey bud, no, sadly it cannot
great vid! just built my pc and i noticed my gpu running about 80c when playing apex and warzone. I will try these settings when i get home. Also i've looking for a way to change the RBG strip in the front of the card. THANK YOU SO MUCH! liked and subscribed boss
Thank you so much for your kind words and support my friend, it means the world to me and I am so very happy I could help you. This will be another thing that will help: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
@@ThisBytesForYou thank you. I watched that video as well, I'm going to make my radiator fans exhaust now. I thought them sucking in cold air would cool better but I need them to exhaust hot air. My gpu seemed to run about 80c still tho 😥
@@PoloMac979 do you have your front fans blowing cool air in?
@@ThisBytesForYou yes, I do. I didn't seem to hear the gpu fans ramp up when the temp got higher. I set the fans curve to aggressive and pressed save. Do I need to keep precision running or can I close it
@@PoloMac979 you need to keep it running, but it can be minimized.
I set my fan curve to aggressive and on idle the fans are running at 1,200RPM. Is that okay? My GPU also runs a little hotter than yours. On idle it's in the low 30s. Not sure how you're getting 25c. I guess you have better airflow. While gaming it runs anywhere from 60c to 80c depending on the game. I'm not at all concerned about noise; I don't want the GPU to burn itself out.
Hmmm, what is the ambient temperature of your house, thats a bit hot, but also, this might help: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
i got a 1060 sc from evga sadly no rgb but the programm helps me to get my temps down to like 30celcius yeah i know thats not low but i let the single fan spin infinitly just when i start the pc i let him rest then the programm starts normally and lets the fan spinn up have a nice day
that temperature is great, no issues what so ever, you can get it lower, but its great. I hope you have a nice day too.
So question. I have the same card and x1 i use icue but looking at your gcard i noticed my evga emblem on top isnt glowing. Am i doing something wrong?
Are you expecting icue to do it?
@ThisBytesForYou No but when I run x1 my gcard rgb doesn't light up was wondering if there's something I may be missing
@@l.r.7505 what is the product number for your card, the exact model number, this video will help you find it ua-cam.com/video/65ZSiVImJx0/v-deo.html
What PCI-e cable you are using? My default cables that came with Corsair PSU is really hard to bend.
The ones that came with my power supply, check in the description.
In a jaytwocent video was stating to use 3 separate cables for each of the pins in the card , gives a better power distribution to the card .... any feedback on that?
Sooo, did you watch this video?
Its also worth noting , like many high end Ampere cards this stupidly uses around 100watts "more" squeezing's out literally the last few % in performance. If you correctly undervolt you can usually trade a tiny 0-3% performance while hugely lowering heat, power usage and noise(fan RPM). If you have heat issues you can actually "gain" performance from undervolting, either way its not worth leaving these cards running at stock.
You are right my friend, though I don't have any thermal issue, as my house is usually at 63°F (17.22°C) though these methods have helped. I plan on working more versions to help in cooling, and yes, fixing thermals and voltages can give you huge gains. Thanks so much for stopping by.
love the content man keep it coming! , quick question i have a evga ftw3 3070ti i adjusted the fan curve a little in precision x1 my temp at about 6-8 percent load on the gpu is 37 degress celcius is that a good temp for that small amount of load ?
you sure you watched this video with that question?
Yes I watched the entire video and a few of your other videos as well , I support your channel I don’t understand why you couldn’t just answer my question instead of asking back a question like that lol. Thanks for the reply though nonetheless. Ps I seen you card was at 25 degrees the entire video that’s why I asked.
perfect, i reply like that to many people, because the answers are in the video, that they are asking, like when you asked about the temp, i ask back the question so that you can second guess yourself and watch the video, like you went back and verified and found the temperatures I referred to.
A question is usually something you don't know and have no reference to answer, and as you can see with all the other comments, I love to help, but I don't like to help when people just come, don't bother watching the video to ask me a question that is already answered in the video, because they don't want to waste time watching the video, so the question makes what I do totally worthless.
Wouldn't you think that's a good reason for me to reply to a question like that?
@@ThisBytesForYou I agree with you on that , but I’m definitely not one of those people just stopping by And not actually watching the content. I also subscribed to the channel yesterday as well. You have very informative videos and I appreciate what you do.
Thanks my friend, and I really do appreciate it and so happy you understand that I don't reply like that to be a bad person but it's to weed out the bad ones.
so the osd doesnt really work with x1 what do you use to monitor? can you use msi af with it or will there be conflicts?
It is a pain in the butt, but AF works well, and its OK to have both running, if you do any sort of screen capturing, streaming, etc, make sure Precision is not running, thats when its not good to have 2.
@@ThisBytesForYou Gotcha so there is a way to keep using the OSD of Afterburner but the fan control of X1? Not sure how to turn Afterburner fan control completely off. The OSD of x1 hardly ever works.
you can, I do it, but having 2 can cause issues and X1 always works for me
From all that is out there I like your style! On the far side of the card you have one-4pin and one-3pin connectors. I understand that 4pin is for the external fan and three will connect to leds. Am I right?
Well thank you so much my friend, I do greatly appreciate it more than you might know. Yes, the 4Pins are for fans as I show you here and the 3 for ARGB, you got it bud ;)
you're a lifesaver, brother! my card was 35 - 39° in idle and 75 - 78° in games. i switched the fancurve to aggressive and voila - 29 - 31° idle temps. i have a lian li o11 dynamic evo case with push/pull top - intake on side & bottom, so enough airflow i think but couldn't figure out why i had so high idle temps.
EDIT: the temps dropped to 21 - 23° in idle, damn! thank you so much, haha!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Thanks so much for letting me know I could help you, it means the world to me.
So what’s the temps in game ?
can you control the rgb on ftw cards even if you dont have an evga motherboard (I have an asus one)
Did you watch the video?
Hello i hope you can answer me, this works with the rtx 3080 ti xc3 hybrid of evga too?
Yes
@@ThisBytesForYou Thank you! i mean, my card is not running too hot, but its always better to be colder i think
@@PyroSebas I always agree my friend, if you search my channel I have a video in getting better cooling over all in your PC.
Ok cool I did subscribe
Thank you so much for your kind words and support my friend, it means the world to me and I am so very happy I could help you.
Me again, I just subbed to your channel.
Question: would it be okay to replace your glass side panel, with a custom measured screen? For like an open air concept, or is that dumb?
you could, but I would not, open air means air doesn't get to where it should, my recommendation at least and thanks so much for your support, it means the world to me.
@@ThisBytesForYou I just ask Bc I mount my Evga 3080 vertically and my glass panel gets super hot
yeah, I would not mount any GPU veritcally, it gets hot because it does not have enough room to breath. compare temperatures with and without the side panel. The GPU fan has to work soooooooo much harder when vertically mounted.
i saw that you hade a support for ure card. is that needed cuz i have the same card but im not using any support
no, its not needed, but it can cause issues if you don't have one, check out this video : ua-cam.com/video/hyEJz56yg24/v-deo.html
Does the FTW3 already come installed and you only have to hook it up to your motherboard?
You need to install it, maybe check out this video: ua-cam.com/video/XRaQic7rbCA/v-deo.html
Thanks for the tip
But I bought rtx 3080 titanium gigabyte master and I play games often 12 hours a day can u tell me what speed is needed for GPU fans?
impossible for me to tell you that, I like my house at 63°F, which helps cooling my PC, I am sure you house is hotter, so you need to run your fans faster, watch this video to help you and always happy to help my friend, so happy I could.
Hey All. I know this is an older video but I just got this card and installed it and am using Percision X1. I have tried adjusting the fan curves and cant get the fans to come on until 60 degrees Celsius. I have tried uninstalling and reinstalling and nothing seems to resolve it. Just looking for any help.
so... what is the manufacturer and model number of your card?
@@ThisBytesForYou my card is an EVGA 3080TI ftw3. Thank you for the reply. I just completely missed the tiny “fan curve control” button. It’s weird how stock it doesn’t turn the fans on until it reaches 60 degrees Celsius. Is there any other work around to that?
that is a feature designed by EVGA, maybe by NVIDIA, there is no way to bypass that though. sorry it took me so long to reply, aside from "Held for review" there is a complete other section where youtube hides comments, which you can only find on the phone.... I have hundreds of comments on there it seems, I am going through them now, these amazing discoveries that youtube doesn't mention.
Nice information - you should have had the card under load and then do some of this - that way we can actually see what helps cool it. Just a thought.
thanks bud, oddly enough, you have been the only one to ask for this, it has helped many, but I will try to add it into another video.
Love the video. Thank you so much for the detailed information.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Does it matter if it’s precision steam , stand alone or for game bar like what is the difference?
yes and no, I recommend Stand Alone, because it will work by itself, the steam version requires steam to be opened to work, I don't get the one at all.
@@ThisBytesForYou thanks
@@islandmanliming Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
So quick question. I set up my fan curves preset to stealth however, do I need to have precision x1 program on for the preset to be set or does the app automatically read the fan curves I choose whenever I boot up my pc?
Precision is for the video card, your motherboard isn't controlled by it, unless maybe you have an EVGA board. The BIOS would control everything on the motherboard, precision would control the video card.
@@ThisBytesForYou so whenever I boot up my pc would I need to have start with OS checked for the fans to be initiated instead of having to open precision everyday and leaving it minimized for the fans to stay set? So sorry my guy never used this so it’s new to me but I learned a lot of the curve settings from this vid!
@@darko_0682 no worries my friend, I am here to help. Yes, I HIGHLY recommend you have it set to start with OS, minimized so it can adjust as need be but are you finding your system too hot?
So last I checked, it’s gpu temp currently consistent at 60 degrees but whenever I’m running like a game with high settings it goes up 80 and the fan tends to be a little loud.
@@darko_0682 well, this might help you and then you don't need to worry about fan curves: ua-cam.com/video/J5m5WBlPkfc/v-deo.html
Is it better to use this software as opposed to msi afterburner? My card has been running extremely hot with msi afterburner, (75C @ ~70% utilization). I’ve been even contemplating replacing the thermal paste and adding additional thermal pads to the back of the PCB and connecting to the backplate for additional heat sinking. Do you know if the firmware installer updates the actual vbios? Or does it only update the fan controllers? I appreciate this video since I recently purchased this exact same card and have it set to the “OC” vbios, and it’s insanely frustrating how the card will gain a substantial amount of temperature for being fps capped @ 1080p.
What is the manufacturer and model number of your card?
@@ThisBytesForYou Sorry, I should’ve initially stated that it is the exact same card as this video’s (EVGA 3080 Ti Ultra ftw3). However, after following your process and updating the firmware, I used the OC scanner, and found that I was able to achieve the exact same thermal performance @ ~ +100Mhz (MSI afterburner went up to 75C @ ~1905Mhz). So my card is reaching that 75C thermal fps cap limit on precision X1, at a more efficient rate when topping off at 1995-2005Mhz. So whatever precision installed/updated for me, resolved a major concern for me. Don’t know if I should even consider replacing the thermal paste at this point. This is quite the significant difference, and I wonder if other EVGA 30-series cards could see a benefit when moving over to precision from afterburner. Ideally, I could even lower the OC a small amount for substantial thermal and acoustic performance gains.
@@joselaba Precision is made by EVGA, the people that made your card, they are going to know better what their card needs than MSI, people that make their own NVIDIA based cards. Precision updates the firmware for EVGA cards, MSI cannot do that. You could achieve much better, but you have to find out how thick the thermal pads are on the card if not you could severely negatively affect performance. I think a better idea is to leave it alone, let it do its thing. Adjust the fans in your case, to provide overall better airflow in the case which will provide better cooling for the card and drop the temperature in your house, if you have the heater on, things get hotter.
@@ThisBytesForYou oh yeah I agree. It’s just extremely strange to see such a drastic change in thermal performance (arguably the 2nd most important characteristic of GPU Cards) from a firmware update of an OC/monitoring piece of software. Thermals we’re so bad that I was even considering installing an entire dedicated water loop for my card since my 12900k is utilizing an AIO like your setup. I also can’t help but wonder if these same thermal characteristics would remain the same, since it’s a firmware update, and transfer over to MSI afterburner. Also, I was under the impression that afterburner is a universal piece of software, and could be used as an efficient OC-tool/monitor.
@@ThisBytesForYou Regardless, thank you for posting this video. Like I said, I wouldn’t have ever guessed that precision would provide such a crucial firmware update.
I do not understand this G D software at all.
I can change the light scheme on the color bar but that's about it.
Is there an Auto OverClock button anywhere...??
Did you watch the video?
@@ThisBytesForYou I figured it out from a another video, all I had to do was search for 3070 overclocking on here to see where other people were landing. Took me all night to figure it out though... not intuitive Running my EVGA 3070 FTE3 GPU at 120 (2070 mghz) and memory at 1200 (8000mghz) at 45C /100% load.
Interesting this card has a RGB pinout on it. Did not know that. Somewhere on the card is a power saver / overclocking switch which I could probably see if I weren't totally blind. As in get a check from the government every month for being blind blind.
and a fan pinout, so you can connect PWM fans and control the RGB and fan through the software, pretty nice. Nice about the check, but not so much about the blindness, my mom is also legally blind, not totally, but has horrible vision, after COVID, my vision has gone to crap too, sucks. Toward the front of the card there is a little switch.
After I did some under volting I haven't had any heat issues, 60-70° and fans rarely go above 70% and generally run in the 50-60% range.
Anyhow, I would love to know why power cables you have there. My cables are blocking more of the cards RGB lighting than I like.
good stuff my friend, but the power cables come with the power supply, you can check it out in the description
Shouldn't have to undervolt this card.This is evga's flagship card and it's expensive and made for overclocking I want every drop of performance
@@timtoomuch MUCH of it has to do with the ambient temperature in your house, where you have the PC seated, and overall system cooling.
@@timtoomuch under volting isn't necessary. It'll run just fine "hot and heavy". It just doesn't seem to me that the gains from that are worth the extra watts it draws and the extra money those watts draw from my pay checks. 😂🤣🤣
@@Given119 I never recommend undervolted because it could add needless stability issues but some times people just want to do them, I can't stop them haha but I think this is something I should test and put a video up for.
Could this work for Gigabyte 3080 TI OC model, Aorus engine does not have this kind of controls?
no, this will only work under EVGA cards.... you will need to use MSI afterburner, that should work for you.
also, for the RGB portion, part of Gigabytes line up, you will need RGB Fusion 2.0
i converted the evga 3080ti ultra with a hybrid kit in a lian li 011 dynamic. i have the side as intake push pull bottom intake and exhaust with a 360mm rad for the cpu. my temps are 64c max. with air it was 83c. Wondering if i should switch back to a corsair 5000d or if there would be little benefit for temps.
There is always a benefit with extra room, while the 011 dynamic is a great case (I love that case) the 5000D is much bigger (maybe even try the 7000D). It has a ton on of room , what is your ambient temperature in your house?
@@ThisBytesForYou thank you for the reply it means a lot as i have no else with same hardware to ask. room is 72f/22c i had a 5000d but sold to my friend before i had a 3080ti. what temps are you currently getting max with the 3080ti and room temps you have so i have an idea of what to expect?
I am usually in the 60'sf in my house, I like it NICE and cool, the cooler the ambient, the cooler the system and the card can be anywhere between the lower 60's and lower 80's and always a pleasure my friend, I am so happy I could help.
@@ThisBytesForYou on air i would get 83c before going hybrid so that helps me know its the card in general. i hate the idea of undervortling because the card is barely strong than a 3080 that undervolting getting 3080 fps defeats the purpose of my upgrade lol. just wish the temps weren't 76-83 going to the TI. thanks again for the reply! subscribed!
@@mileskt9232 always a pleasure my friend, so very happy you enjoyed it and thanks so much for your support, it means a ton to me. As for the temps, i am sure I can go lower, i just need to play with it more but since I am just a team of 1, and I keep getting new products and I have a day job, its soooo hard to keep up. Stay tuned my friend, trying to get more out for you, thanks again. And let your friends know about us, it would help tons. Thank you.
Hey, appreciate your video. My 3080TI FTW3 isn't showing 3 fans/RGB is not working on the card. 2 fans are spinning only. Any suggestions/ideas?
Please provide the manufacturer and model number of your card, power supply and motherboard
@@ThisBytesForYou EVGA 3080TI, Thermaltake 850w RGB toughpower grand, tuf gaming x570.
@@omaronMnK ok, so sadly that isn't the model number of the card, it would be something like : 12G-P5-3958-KR, 12G-P5-3959-KR , 12G-P5-3968-KR or others so I can't say anything about the RGB aspect of it. Have you already installed Precision X and used it like I showed you in this video?
What should the temperature be on a RTX 3090 and a 5900x? Mine hovers between 73-75. I have a Kraken X63. My case is from a prebuilt cyberpower PC just new components.
Sorry it is not related to a 3080 TI.
The 3090 is a beast, you NEED to have good system cooling to keep it working well. For example in this video, you can see me playing some games on the 3090; ua-cam.com/video/YVPBpfbA22Ee/v-deo.htmln on this video, I might have come close to the 70's, but never hit 70 and in this video I do the same I do in the video we are chatting on: ua-cam.com/video/lKDONiejqRs/v-deo.html, how many fans do you have in the front, and are they blowing in or out, how many fans do you have on top and are they blowing in or out, how many fans do you have in the back and are they blowing in or out.
@@ThisBytesForYou I have the radiator on the front blowing in(two fans) two on top blowing out and 1 in the back blowing out. Maybe I need the two on top blowing in? Thanks for the quick reply!
is there anyway you can move the radiator to the top? I have the radiator in some systems on the front, because I have no choice, but they block a lot of air flow. And always a pleasure my friend, I love helping.
@@ThisBytesForYou I will definitely give that a try. Thanks!
Have you tried undervolting yet? I’m running mine 0.900V at 1905Mhz and seeing a significant temp drop, 200 less fan RPM, and 70 watts less power consumption. My timespy graphics score went from 19,700 to 20,300 as well.
wow, no I have not, but I plan to, since my previous system kind of fell apart, I am very far behind on reviews, I am playing catchup. Please do subscribe and click on the bell notification so you stay notified of everything I release. Thanks for stopping by my friend.
as for the improvement in scores, do you think that could be due to heating, have you checked the temps before and after?
@@ThisBytesForYou I’ve done a lot of monitoring while running Timespy, Firestrike, and Unigine Valley and what I’ve found is that the card can’t sustain 1905Mhz boost clock as it becomes power limited at 400 watts and the frequency pulls back to 1875-1890Mhz. With the undervolt now you’re not power limited and the frequency never drops below 1905Mhz and at times boosts even to 1920Mhz.
Stock fan rpm was 1770, 71% fan speed, temps 76C, 86C, and 83C.
With the undervolt fan rpm is now 1570, 67% fan speed, temps 69C, 82C, 77C with a 4-5FPS boost in Timespy! I just use the stock vBIOS as I appreciate fan stop.
@@andrewmorris3479 Ahhh ok, I don't like the fan's top stop, the noise never bothered me but i know it does some. OK, I will test this, I just can't nail down when as I have a lot to catch up on. Also, what manufacturer and model power supply do you have?
@@andrewmorris3479 i have exactly the same undervolt on my evga 3080 ti ftw3 ultra!! Works perfect 👌
Have you tried connecting the computer to an HDMI 2.1 tv. I get audio drop outs connected to an LG B9 and it seems to be a common problem with hdmi 2.1 PC connections, but I don't see many videos on it.
no I have not, but, do you have an HDMI 2.1 cable?
I guess not
@@ThisBytesForYou Sorry for the late reply. I have 2 HDMI 2.1 cables. Bought a new one just in case. No matter what I switch the sound to (Stereo, 5.1, 7.1, Dolby Atmos) there is a problem. I only get stereo on the 5.1 or 7.1 sound and Dolby drops.
@@carlrhxphn an updated from LG on this, its not your model specifically, but it might help (So you don't have to read the entire thing, Disable G-Sync)
Dear Valued LG Customer, We appreciate you for patiently coordinating with us regarding the current condition of your LG OLED65C9PUA TV,. It is our goal to ensure that you are able to utilize your LG product at its fullest potential so let us assist you with your inquiry today. We thank you for getting back to us regarding your case. In response, we are aware of these recent reports where TV displays no signal, blinking or flickering video when using NVIDIA RTX3090, RTX3080, RTX3070, G-SYNC, VRR. This is caused by TV not supporting signal of NVIDIA GeForce RTX 30XX video cards. In this case, we do recommend disabling GSYNC on the PC and Disable HDMI Ultra HD Deep color on the TV while waiting for the official update to resolve this to be released in the end of November for 2019 LG TV models. Please see below: 1. Click the right mouse button on the Windows 10 background - Go to NVIDIA control panel. - Display - Set up G-Sync - Uncheck the “Enable G-Sync” option 2. If you cannot se the PC screen: Change the TV settings - All Settings - Picture - Additional Settings - HDMI Ultra HD Depp color -OFF However, if turning off G-SYNC is not acceptable, you can participate in the public review program of the firmware update. Just to set proper expectations, this public preview program software is yet nearing completion and unexpected bugs and glitches may occur. The installed public preview version will be upgraded automatically as soon as the update is ready. Another thing, once this public beta is installed to your TV software, there is no way for you to roll back to your previous software version. Additionally, this update is to solely address the reports concerning the NVIDIA RTS 30XX reports. No other improvements were planned and you are discouraged to participate if you are a non-RTS 30 user. Lastly, it may take up to five business days to get the software update after you apply for the beta program. Should you wish to proceed, may we request for the following information so that we may create an account for you in our system where we will associate your request? - MAC Address - Full Name - Serial Number LG is committed to providing the best customer experience. We would love to hear your feedback regarding the support you received via email. To help us improve our customer experience, please take a few moments to complete the Feedback section available at the bottom of this email. From this section you can rate your experience, send us suggestions, and provide any additional information you would like to share. We hope this information has been helpful in addressing your inquiry. Should you have further inquiries about LG products, you may contact us again via Email, Live Chat, or Phone by calling 1-800-243-0000 and we'd be glad to help. We are available Mondays to Sundays from 7AM to Midnight CST. For repair service, you may also visit www.lg.com/us/support/repair-service/schedule-repair Thank you for contacting LG.
Thanks for the update. I did try turning off G-Sync but still had the problem. It only affects audio. I did not try turning off HDMI Ultra HD Depp color. I hope there is an update in November for the B9. Again thanks for the great work and the video about how to install the Graphics card. It really helps alot.
Should I stick with my 3080 Strix OC or get this one? Would i be able to play in ultra settings and stream apex with this gpu? I cant do that with my 3080 Strix
stream in 1440p while playing in 4k.
@@DOSDreamz nah, wait and see what next gen has in store, 3080 is still nice. Seriously, who cares about Ultra, it looks nice when you stop and look at the walls and trees, then you get shot. While you are running around playing a game, you are not focused on the extra shiny, you are focused on the task, and at high settings, very high even, if should run great.
@@ThisBytesForYou thank you for your honest response, I was only curious about this card because some salesman at microcenter swore it would help me with streaming games easier. I'll just focus on upgrading my psu and cpu by the time next gen arrives, thanks!
@@DOSDreamz yeah, you will notice a difference but it wont be huge, you will notice a huge difference upgrading to a 4080 though for sure, I will have it for sure when its released, I think haha so stay tuned my friend.
What should be the normal temperature of this GPU. I have the same one, and just by watching a few videos it reaches 35° to 40°.
That is normal?
S.O.S.
Thank you for reading
@@hamsadbecerra3701 it mainly depends on your ambient temperature in your house and I. Your machine but those temps are fine, watching videos uses your GPU
Enjoyed the video...I'm a product photographer using PS for post graphic edits....Large file graphics work...is this the best card or do you have a better recommendation.....Just need info to buy the best card using PS graphics....Thanks
thanks my friend, so very happy you enjoyed it. While this is a great card, its not the best, the best would be the 3090, you see here: ua-cam.com/video/A2aqpr05-WA/v-deo.html or the 3090 TI but in September newer cards are coming out, so if you can wait a little while, I suggest holding off a little.
hey bro do you know how to fix it repeating asking to restart when first getting it, asking for a system restart for new firmware again and again
restart when it asks you, it will save you headache
@@ThisBytesForYou it's looping though, everytime I restart if I try opening it, it asks to restart again
oh.... try closing it, then uninstalling it, then restarting and reinstalling it, that's weird.
I have same card 3080ti evga my card fans are at stock auto. When i game on warzone my card is at 70 to 75. What u recommend i put it at. And is it same to raise fan speed
have you watched the video?
@@ThisBytesForYou yea will it hurt if i raise the fans. I only use it for gaming.
the first few seconds tells you what the video is about and why I do it.. not sure why you are asking this, other than not having watched the video.
I just got the 3080ti evga. Should i have the switch on the card in oc or normal mode .
totally up to you, but I would go for OC because why not, its there and congratulations ;)
Thanks
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I have that same 3080 and it reaches 83 degrees should I be concerned or is it normal?
What manufacturer and model number is the video card (I know you say its the same, but please provide the exact model number), motherboard, case and how many fans do you have in the case and the ones in the front, blowing or out, top, in out or, rear in our out, bottom in or out and what is your ambient temperature in your house, C/F so that i can help.
Hello, I just used my RTX 3080ti to test with AIDA64 and 3DMark stress test, and every time the GPU could only reach 85% of theoretical power consumption (around 348w). I do not overclock the card, and the auto boost frequency is 1920-1935 Mhz. Is that normal? I try to check whether I connect the power cable (3 8-pin VGA cable) and it seems to look good.
So, let's rewind,... why and what are you trying to do?
@@ThisBytesForYou I wish that my card could run in 400watts. I talked with consumer care and they said it is normal that without manual overclocking, usually the graphics card with be 350watts. And thank you sir, with your help I successfully enabled resizable bar.
@@user-sb2pi7zs7s hey bud, so a 3080ti requires AT LEAST a 750WAtt as per EVGA's website. This not only takes into account wattage, but Amperage and volts. Always a pleasure my friend, I am so happy I could help you.
@@ThisBytesForYou Thanks I use the 850W superflower leadex Titanium. I think the power supply is not the problem.
ahhh, good stuff my friend, they make PSU's for many companies we buy power supplies for today, so you got it from the source but, I still don't know what the problem is, what is the problem?
Do you know about on avg how many fps this thing is suppose to push on like warzone?
that video is coming soon, I am very backed up, make sure you are subscribed and have the bell notification on so you know when I come out with my next video.
@@ThisBytesForYou I sure am!! I followed your step by step on how to install the evga ftw3 3080ti amazing work bro!! So easy!! Appreciate it!
awesome my friend, thanks so much for your kind words, they mean a ton to me and I am so very happy I could help you.
My question is which direction does the air flow? Do the fans pull in cool air and push it in to the radiator or do they pull hot air from the radiator and exhaust in to the case?
you want cool air coming in from the front, ideally, you want regular fans in the front, as the air would be unobstructed allowing more air in, but that's not always possible. With that said, in this system, I have fans blowing in from the front of the case, sucking cool air in, then 3 other fans on the side, sucking cool air in. The radiator is sucking air out, exhausting "hot" air from the case but since I have so many fans blowing in, there is little to no hot air, so it is still pulling cool air, even if I were to overclock, it would pull in cool air, cooling itself. I have the rear fan also exhausting.
@@ThisBytesForYou Thanks for the reply and the info. I may have been unclear with my question though. I meant do the fans on the gpu suck cool air in to the gpu radiator or pull hot air away from the gpu radiator?
@@animalmother3526 ahhh I see, the gpu fan sucks cool air from the bottom of the case, in through the heatsink and sometimes out the back, where the hdmi/dp ports are or out back int the case, but above where the fans go
@@ThisBytesForYou excellent. Thank you. Been struggling with cooling my new 3080ti ftw3 a little bit. I got a microcenter bare bones build with a titan x? Case. Its setup for cpu water cooling which I have not set up yet but the front and side panels are solid glass/acrylic. Also cant mount a fan on the rear at all. Generally seems like a bad case for air flow but I got 2 intake fans below the gpu and one on the side/bottom, 3 exhaust fans on the top where the radiator(included with case) is and one extra exhaust on the top/side. I'm using some old fans but gpu temps are in 60- low 70's C usually (default clock and voltage settings). I have space for one more fan on the side. I also have space for one more on the bottom/center but there is some cabling connected to the mobo in the way that prevents me from puting the fan in there. I'm hoping I can further improve the situation by getting some lower profile connectors and installing more/newer fans. I wonder if I'll be able to manage gpu temps better once I set up water cooling for my cpu.
@@animalmother3526 Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you and those temps are not bad at all.
Dude, have you had any issues installing that GPU on that motherboard?
I recently bought an RTX 3080 FTW Ultra and I can't install it properly on my pc.
It loads Windows normally then I proceed to install Nvidia drivers then I get BSOD right away.
Thought I had bad GPU but it's not the case. Tested it on my brother's computer and it went all well on the first driver install.
Any clue on what might be?
Specs:
MSI MEG X570 ACE
Ryzen 3900X
PSU Corsair HXi 850
32Gigs Gskill 3200 Trident Z
It works fine with my old GPU (1080Ti).
Didn't reinstall windows from scratch though.
you don't need to reinstall windows, but you are using an 850... are you using 1 PCIE x8 per pcie connection, or are you pig tailing connections, they need 1 PCIE per connection from the power supply.
@@ThisBytesForYou I've used 3 different cables to power it. Single connection from each cable.
I did the same on my brothers computer and the card worked as expected on his machine (older pc, i7 6700K, Asus Maximus Ranger VII, 16 Gigs Corsair 2400 and I used my PSU on his PC)
I might try to use DDU and test it once again, seems like a software issue.
I inicially thought that the card wasn't connected properly on PCI-e slot, but I think that's not the case, since it fits fine on the slot
Ok, so you know it not the card. Do you have the latest BIOS on the board and do you have the PCI slot set to PCIe Gen4?
Are you overclocked?
@@ThisBytesForYou No, it’s not on the latest bios.
CPU is not overclocked.
update to the latest BIOS, after updating, go back into the BIOS, load optimal defaults, save and exit, then go back in, make sure to enable XMP for your memory, set your boot devices and try again.
hello. mine doesnt have 1 led option bar. i have the latest precision firmware. any way to control the led lights?
What's is your cards exact model number and manufacturer
@@ThisBytesForYou evga rtx 3070 ftw.
The model number
It will say it in the box or on a sticker on the card or the receipt
@@ThisBytesForYou i exchanged it before but when checked the precision x1 app, the LED option is already missing. Now my light is stuck to all red.
I have the exact same graphics card, gpu sag stand and aio as you
Very cool my friend, how are you liking it.
Hello. How did you update the bios of bo version 94.02.71.80.86? I have updated my bios to version 94.02.71.80.74
I showed you in this video how I updated the firmware.
@@ThisBytesForYou in order to update the bios, you need to re-install the evga precision x1 program?
sometimes yes
I noticed your gpu temperature stay at 26 degrees. I have the same gpu and the temperature normally be around 30 degrees. when playing games it will go up to 78 degrees sometimes restart it self I increase the fan speed same problem. My setup Asus dark hero MB 7 5900X. PS 1500w platinum 3080 ti ftw3. The case have great air flow phanteks p600s. I did not do any overclock. Any idea why it's running so hot?
what is the ambient temperature in your house?
@@ThisBytesForYou I keep it at 70 degrees.
thats why its hotter than mine, my house is typically at 63°F , (17.2222 Celsius) so that is normal. You cant get below ambient, if you do, it might be 1 or 2 degrees. To get cooler, let me know how many fans you have, where they each are and how they are blowing or sucking air, maybe we can get better, but not by much. Lower your temperature and you will see that 78, go down.
@@ThisBytesForYou I will make some adjustments tomorrow with a 180 radiator I have in front of the case I have 4 fans on it 2 pull the other 2 sucks.. I will take of the 2 fans sucks air and mount the radiator on top of the case with only 2 fans and see if that makes any difference. Always appreciate your help thanks a million.
I have eight 140 fans on the case
Do i need to buy gpu holder?, if yes recommend one please ❤
you don't need to , but I recommend it, you can see some I use here: ua-cam.com/video/hyEJz56yg24/v-deo.html
дружище , подскажи пожалуйста как отрегулировать скорость подключенного доп вентилятора в видеокарте разъем 4 пин ?
buddy , please tell me how to adjust the speed of the connected additional fan in the video card 4 pin connector ?
so if you watched the video, if you connected a fan, you would see fan 4, you would slide the slider under fan speed and click apply.
hi, I use exactly the same card as title, and I do able to set the fan speed, but why does the RPM and % on the left side stay 0?
did you update the firmware?
@@ThisBytesForYou I did, I believe I did, it made a loud noise during the firmware update the first time I opened precision x1
ok good, so when you say 0, if you look at the fans, are they spinning? The fans do have a zero db mode, when they are not truly being utilized and the card is not hot, where the fans stop.
@@ThisBytesForYou yup they are spinning, I even deactivated auto and change the speed myself, and it still shows 0 RPM and 0%
@@uwingy669 hmmm, I would recommend calling EVGA, their support is amazing
Which fan did u use here
I just added it to the description, thank you but you can find them here on my Amazon affiliate link: 🔥 Anidees AI Aureola Duo 140mm 3pcs RGB PWM Fans x 2 Kits: geni.us/pAZ1
My card idles at 43° even with fan curve and under full load it gets 85° or so.I replaced thermal paste with mx-4 with no change not sure how your temps are so low also mines in a corsair 5000d airflow case resolution is 4k 120hrtz
What is the ambient temperature in your house?
About 72°F
@@timtoomuch mine is usually at 63, so you see why the temperature differs.
@@timtoomuch the cooler the ambient temperature, the cooler the temperature in your pc will be. Also, don't put it on the ground, put it on a desk, don't push it up against the wall in a corner, it needs space to breath and exhaust and make sure you don't put anything in front of the fans.
@@ThisBytesForYou I'm pretty familiar with all that but thank you I did the thermal pad upgrade by critical pads repasted the gpu with kingpin thermal paste but no change in gpu temp.thanks for the reply I appreciate it
Change thermal paste and thermal pad for the backplate. This stuff doesn’t work in the long term
At some point
Will this software create conflicts with MSI AfterBurner?
It shouldn't, I have run them together for a while.
@@ThisBytesForYou thank you :)
With EVGA now cutting ties with Nvidia I was worried the software was not going to be available anymore, but I noticed there's an "updated" version of it available for download now too, only downside is that it requires for an account to get it now.
@@phenompy always a pleasure my friend,nao happy I could help you. Not a biggy for many on the account, since a lot of us had it anyway for warranty purposes. Make sure to subscribe if you like this kind of stuff, I have an EVGA video coming out tomorrow
How do you have your clock at 210 mhz
It's how the card came out of the box
i cant get my clock speeds any higer than 1725, can you help me get this thing overclocked?
No, overclocling will differ from card to card.
@@ThisBytesForYou any reason why I can’t get my core speeds higher than stock? Like they don’t move.
@@craineyy6703 make sure you are on the latest version of Precision X, make sure you update the firmware on the card, make sure you give it power, make sure each of the 3 PCIE connections i plugged in individually into the power supply, not daisy chained and you should be good.
Hey bro just woundering does any of this have like negative effects on the fps while gaming ? Or just for the temps to stay lower
Well high temps cause lower performance which is why everyone wants to cool their gpu and CPU so much, so this helps tons.
@@ThisBytesForYou so i set my fans to aggresive .. should i also set it to like 60% or setting to aggresive i cant leave the 3 fans to auto?
Also ive been getting like 80-85 degres on cal of duty.. i heard people talking about overclock or undervolt.. im not super comfortable since i basicaly don’t understand much abt all of this :( my cpu 5800x runs hot to but is expexted.. i saw people talk about undervolting that too.. but idont know.. what would you suggest bud? Sorry for millions questions
@@tonpere9331 I don't suggest undervolting, you will run into issues and blame the card or your system, but you cause the issue and it may not appear at first, but it will appear later, nott saying you as in you, just those people recommending it. How many fans do you have in your system,
01. How many fans in the front, and are the blowing in or exhausting air?
02. How many fans in the top, and are the blowing in or exhausting air?
03. How many fans in the bottom, and are the blowing in or exhausting air?
04. How many fans in the back, and are the blowing in or exhausting air?
I have a 5900X, and it doesn't get hot, neither does the card, What are you using to cool the card, actually answer the following questions as well as the top question
05. What is the manufacturer and model name of your motherboard
06. What is the manufacturer and model name of your liquid or air cooler for your cpu?
07. What is the manufacturer and model name of your power supply
08. What is the manufacturer and model name of your case
09. Do you have your case pressed up against the wall or in a corner or tucked away in a cubby or on the floor?
10. What is the manufacturer and model name of your RAM
@@ThisBytesForYou i bought a pre build cyperpower pc and changed the gpu, the cpu cooler, and the psu
1- it has 3 apevia fans in front verticaly , blowing or exausting .. i have no idea to be honest i guest blowing inside.. since in front of the fans is glass..
2- no fans on top just like some perforated mesh i guess
3-no extra fans in the bottom other then the psu fan i guess or maybe the gpu fans ( micro atx case by the way)
4- i have on apevia fan that was build in also and probably also exhausting out the air because i can feel it in the back
5 asus b550 ma ac motherboard
6- it is a noctua nh-ua12a chromax black it has 2 fans .. one is close to the back fan of the pc and is exhausting the air and on the right side near the ram is on another fan blowing the air inside threw the heat pipes
7- it is a corsair 850w rm850w
8- cyberpower pc case couldnt find the model but find something with the same case : www.bestbuy.ca/en-ca/product/cyberpowerpc-gamer-supreme-gaming-pc-white-amd-ryzen-7-5800x-1tb-ssd-16gb-ram-rx-6700-xt-win-11-eng/15741157?cmp=seo-15741157&cmp=knc-s-71700000055264715&gbraid=0AAAAAD-7qGz9_p9ICm-qtZ7ZMedJ-mA0L&gbraid=0AAAAAD-7qGz9_p9ICm-qtZ7ZMedJ-mA0L&gclid=CjwKCAjwqauVBhBGEiwAXOepkULOdI_IqJSju71UWdVMQvTFvtDnHiKx5JNko-tUhViQoaqXBk5z-BoCK9wQAvD_BwE&gclsrc=aw.ds
9- on the cubby near the wall but perpendicular so the back can air out near my monitor wich also isnt the best but yeah lol
10 32 gb two sticks of 16gb 3200mah tforce vulcan ddr4
Thank you for your time brother
AHHHHHH, thats an NZXT or NZXT Clone case, that is your HUGE issue they are starving for air, you have 3 fans pulling air n at the front.... but from where, little tiny holes on the side of the case.... it needs more air. So do you have the back, the exhaust against the wall, or with more than a foot of space to breath, take it out of the cubby, it needs to breath. Take it out of the cubby, put it on the desk, don't hide it, you are proud of your PC. In a cubby things get hot. Do the machine still have a warranty on it?