The NEW Traction Off Module For Mitsubishi Pajeros!

You asked, we listened! We are so stoked to be bringing this one-of-its-kind modifications to the market: The Mitsubishi Pajero Traction Control OFF Module 🔥
Unlock the true potential of your Mitsubishi Pajero Gen 4 (NS, NT, NW, NX models 2006-2021) with our new Traction Control Off Module. Fully disable the traction control system with a quick and easy installation - less than 5 seconds for bull bar-equipped Pajeros and 3-5 minutes for factory bumpers.
How It Works:
Locate the ABS sensor in front of the driver’s side wheel (two black plugs).
Ensure the car is turned on before disconnecting the ABS sensor.
Unplug the sensors and install the module.
Look for the three lights on the dash (Traction, ABS, and ASC) - this confirms the traction control is fully deactivated.
Get yours here: shorturl.at/bCo1V
PLUS get 10% off this product when you use code: TRACTION10 🙌
Looking for more mods for your Pajero? Check out our website: budget4x4life.com/
Thank you for the support legends! If you have any further questions, reach out to us on [e-mail]

[@sovereignaussie8627]

That's awesome, well done

[@budget4x4life]

Thanks heaps 🙌🏼

[@nicolepetzer4538]

What an awesome new product!

[@budget4x4life]

🔥🔥🔥🙌🏼🙌🏼🙌🏼

[@convergecult]

I'm guessing no on the fly activation? Cool product but don't think I can be arsed getting in and out every time I want to turn it on or off 😂

[@budget4x4life]

You can get the switch loom instead. Only turn it off outside. Restart the car inside to turn it back on easy 😄

[@mattyhjames]

Would have beeb cool if you could have a on/off switch (simple open close circuit) running from the loom that you run inside the car - allowing you to turn it on from in the car when the car is on simulating plugging it in. What happens if you start the car whith abs unit disconnected?

[@budget4x4life]

We can do that as well 🙌🏼 if you start the car it remains disconnected

[@scottirvine1854]

Fantastic.

[@budget4x4life]

That’s it! 🙌🏼🔥

[@martywollaston1146]

Hi, when you said I had to rip my whole dash out, like the photo you showed, to install the TC module for a Factory Diff lock I had to pull back. Yesterday I almost pulled the trigger the current 30 day delivered loom, being EOFY discount. I'm sort of confused if the photo you showed was accurate or whether it was to sell the new product!...Is it really that difficult to install the TC mod for a factory diff?

[@budget4x4life]

You have to take the dash apart yes. We are being honest and dont try to sell anything. We are still selling both so no reason for us to promote one over the other 🙂

[@Pretzil43]

If you're removing the steering wheel you've stuffed up...

[@budget4x4life]

@@Pretzil43 apart from the steering mate. Just the dash. We didn’t have a photo. We have another video on the loom so check it out ✌🏼

[@Pretzil43]

Is there really no fuse you could pull if you don't want on the fly control?

[@budget4x4life]

Let me know if you find one 🤙🏼

[@purificator1004]

Why can't I use it with the pajero that has factory rear diff lock?

[@budget4x4life]

We said you can it is just a recommendation to get the loom instead to turn traction on too when locker is engaged 🙂🙌🏼

[@purificator1004]

@budget4x4life ok thanks. Please create one that turns it on and also easy to install like this one 😅

[@alwynvanderlinde9507]

​@@purificator1004YES