Fork Seal Replacement 1992 Yamaha Seca II XJ600S
Вставка
- Опубліковано 27 лип 2024
- This video is about replacing the fork seals in my 1992 Yamaha Seca II 600 xj600s Project bike. From beginning to end. I have marked it with chapters so if you are looking for a certain part of the install you can find it easier.
If you would like to swap stickers or just say hello to Dolly or Myself please feel Free to Send mail to us at.
M.W.C.
PO Box 1397
Fairfield, CT 06825
If you like my channel Please Like, Subscribe and Hit that Bell!!!!
Also If you would like to purchase Motorcycling With Carl T-Shirts or Stickers my Teespring link is below.
teespring.com/stores/motorcyc...
Follow Me on Instagram
/ motorcycling_with_carl
0:00 Introduction
1:42 Disassembly Begins
8:30 Fork Reassembly Begins
16:54 Adding Fork Oil
19:07 Reinstalling Fork On The Bike
22:06 Closing Statement - Авто та транспорт
Good job!👍
Thank You
This is one job that I need to do on my XJ. I will follow this video step-by-step for sure! Thanks.
Good luck with your bike. Thanks for checking out the video and commenting.
Here's a tip, slide a couple of steel rods or something strong enough through the mudgaurd holes to stop it spinning. it will stabilise everything while you impact the bolt out.
Great job Carl 👍
Thank You thanks for watching
Good job. A lot of work. Have a Happy New Year.
Happy New Year!!! Hopefully the dinning rooms reopen in 2021!!!!
Great job Carl, you are a bit of an ideas man you come up with some good things to help get the job done. Happy new year mate. 👍🇦🇺
Yeah over the years at my job I have to be creative also .Happy New Year buddy.
Big thumbs-up looks like you got into a pretty good job take care catch you later happy New Year
I enjoy hanging in the garage fixing stuff when I can’t ride! Thanks for watching Happy New Year!!!!!!
This is fucking good explanation 👏 I needed do the same on my XJ900 (84) probably is a similar way for replaced 🤔👍 great vedeo mate cheers from Norway 🙋👍👍
Glad it helped. Thanks for watching
Lots of work and parts to keep track of
Hopefully it pays off in the end when im riding around on my classic motorcycle. It will be like being 19 again!!!!!
Fork seal orientation seems to lead to conflicting advice online, on whether lip up or down?
It’s been a while since I did them but I believe I put everything in the way I took it out. Thanks for watching and commenting.
You do not apply grease to anything in the fork assembly. You'll just be gumming things up. Fork oil is the only lubricant that should be used in the fork.
Thanks for the info and Thanks for watching and commenting
In one schok how many oil need fil?
I will check and get back to you
I believe 12.8 us oz per leg
Howe much decilitar?
@@os374cg You need 379ml oil and has to have 111mm oil level from top