1300+ RWHP Camaro ZL1 1LE
Вставка
- Опубліковано 6 лют 2025
- Big Build Time!!!
We do a lot of package builds here at Vengeance Racing, but every now and then we have a customer that comes to us for something that is wild and allows us to show the extent of what our company is capable of.
Mr. Priest brought us his 2019 Camaro ZL1 1LE for the ultimate multi purpose build. What we mean by multi purpose is a car that is not only competitive at the drag strip, but also on the road course, as well as being comfortable for the street to go out to dinner in. In most cases, this means the car would have some compromises since we all know the best drag setup isn't the same as the best road race setup and neither make for the best street setup in most cases.
This no compromise build has achieved all of these things thanks to careful planning and execution as well as using trusted parts that work well together!
The mod list is quite extensive to say the least:
Late Model Engines LTX 427” Sleeved Aluminum Block w/ Large bore CID Cylinder Heads and Vengeance Racing Billet Valve Covers
Blueprinted Katech LT4 Wet Sump Oil Pump
Holley Dominator ECU
Magnuson TVS2650 Supercharger System
Smoothboost Boost Controller w/ PWM Control
JCD Custom “Bigger Gulp” Intake
Nick Williams 112mm Throttle Body
ToohighPSI 10 Rib Drive System
DSX Tuning Lower Pulley
Griptec 2.75 Upper Pulley
Vengeance Racing “Hyper Idler” Support System
Kooks 2” Headers w/ 3 inch X-pipe
Corsa 3” Variable Sound Exhaust
Mighty Mouse “Wild” catch can system
Lingenfelter Big Bore High Pressure Fuel Pump
Crawford Racing/ Holley Dominator Port Injection System
ToohighPSI Port Injection Plates
ID1700x Port Injectors
Radium Triple Pump Surge Tank
Aeromotive Fuel Pressure Regulator/ Filter
Dewitts Direct Fit Radiator
Vengeance Racing High Capacity Heat Exchangers
Miller Custom Fab Expansion Tank - Trunk Mounted
RTS 6XD Sequential Transmission Package
ACT Twin Street/Race Clutch System
Precision Shaft Technologies Custom Driveshaft
DSS Level 5 Rear Axles
GM A10 ZL1 Rear Differential w/ lockout kit
RPM Roll Bar
Tillet Race Seats
Schroth Harnesses
Pegasus Systems Novec 1230 Fire Suppression System
Vengeance Racing 6th Gen Camaro Parachute Kit
Forgeline GS1R Wheel Set (Drag Race Set/ Road Race set
For the heart of this car we turned to our good friends over at Late Model Engines to build us a top of the line engine to handle the big horsepower this car is set up to make. We went with their LTX 427” Sleeved Aluminum Short Block with Large Bore CID Race Cylinder Heads which have been a proven combination time and time again.
For the supercharger, we went with the popular Magnuson TVS2650 Supercharger kit with their 112mm snout to pair perfectly with the Nick Williams 112mm Throttle Body. To keep the supercharger belt making maximum grip we chose the TooHighPSI 10-Rib drive system with our Vengeance Racing Hyper Idler support system, we are super proud to say between all the dyno pulls and street pulls done on this car we used the same belt throughout the process with no belt slip.
Due to the multi-purpose nature of this build we added our SmoothBoost valve on the Magnuson 2650 supercharger. This allows us to control boost by bleeding it off through the valve, so instead of swapping pulleys to increase or decrease power it can be altered by turning the adjustment knob installed on the center console. This allows us to change the power level from 800rwhp all the way up to 1300+rwhp.
To provide adequate fueling to the engine, we went with the Crawford Racing/Holley Dominator Port injection system controlled via the Holley Dominator ECU. On a build of this power level we would typically go with a Fore Triple in tank pump system but due to the road racing this car will be doing we went with a Radium Triple Pump Surge tank to guarantee there will never be fuel starvation even in the most extreme track driving scenarios.
Something that makes this build truly special is the RTS 6XD Sequential Transmission. With a nice, light shift pull, and awesome carbon fiber shift lever, the driving experience is taken to a whole new level which leads us to say “Sequential the World”
We are super thankful to Mr. Priest for allowing us the opportunity to build this special car and show off the amazing talent our technicians possess here at Vengeance Racing!
VENGEANCE RACING
Address: 241 Castleberry Industrial Dr, Cumming, GA 30040
Phone:(678) 513-7105
Hours: 9:00 am - 5:00 pm
WEBSITE
www.vengeancera...
FACEBOOK
/ vengeanceracing
INSTAGRAM
/ vengeance_racing
Insane build! What’s more impressive is a car like this that can be driven on the street!
The joy on the customers face says it all!!
Congrats!!
the balls to be riding w no seatbelts in a 1300whp Camaro. Lol safety first fellas. What an absolute MONSTER that 1LE is.
Me and my mom were in a car accident back in '73, I instinctively buckle seat belts immediately upon entering a vehicle ever since.
I don't think those pulls were on kill mode 🤔
Cute that someone believes seabealts make a difference. 16 years as a state trooper on I-75, seen more fatalities with seatbelts that without.
Agree but I’m gonna go out on a limb and say his harnesses weren’t in yet. Helmets too.
@@8pistons93that why it has a roll cage?
Shit, that owner might as well ask for a huge discount. That car was put through hell.
So sick with the sequential
That dyno pull!!!!! AWESOME JOB on this monster!
I assure you guys when I have 75k just laying around I will be in touch. What a fantastic build!
Man i really should’ve got a zl1 instead of a hellcat. These things are beautiful
that things inSANE!!! LOVE IT! Just got a LT1 because I couldn't find a good low mileage ZL1 in my area.. couldn't really afford a brand new one. So i ended up with a 2023 LT1... currently looking for a supercharger. thanks for the list of parts brother!!
Brutal dyno pull. Violent
That was like a caged LION 🦁
Definitely love this set up...but safety guys....safety!!!
Vengeance racing simply the best
Majestic AF
Correct me if I’m wrong, I didn’t see methanol or nitrous in the build sheet??? Either way this thing is ferocious with that sequential
Here come all the seatbelt nerds
BADASS!!!!!!
1233 lbs of torques is f**king Insane!!
Thats insane, congratulations.
Nice seat belts or harnesses. Well done showing people a good example of what NOT to do.
Another amazing build.
One of the prettieet. Meamest lookikg beasts ever made. Just did a corsa cat back. And it sounds sickkk
Looks like it will make an 8 second pass easy and consistently
Nice build and good video thanks. 👍
Spinning the wheels at 100 mph is wild. With no seatbelts on either!
1300 oh my
3:32 kudos to him for not letting off
Ya he remembered, Shit I'm in a 1le fuck it!"😅
Very cool build guys! Was there anything done to the suspension? The 1le suspension is so tight it’s hard to put big power down
It's fully adjustable
Love the footage please keep them coming
Hell yeah!!
Haha nothing like spinning at 100 mph
i thought he was gonna lose it, lol.
Especially without a seatbelt 😅
Both of their asses clinched the leather seats!
😂😂😂dang bruh that was sic.. I have a stock Lt1 6.2 lol you would blow me away lol love it and thanks for sharing Go chevy Camaros 💪💥👍
What a bad ass machine are you over 150k all together?
For a blower setup? Lmao not even close bro
I’d guess 40k on parts alone. So probably close if you add the entire package of car up. Beautiful ride though. I’d do it if I could afford to
@@Asizzle22ZL1have you seen the build sheet maybe over 80k in parts
@@Shadow5.0I just came across this video again. Didn’t see the ending last time showing the build list.
Your right definitely closer to 80k then 40
Sequential?
Would love to see this car on a road coarse
Yes!!!! Straight line is about the car. Any moron can mash the gas and drive straight
Beautiful 😍
Think maybe Ron double checking C7 not one from his shop 😂
WAYBADASS🤘🏻😲
What did it make on the Dynojet?
The owners face says it all.
1300 HP and the facial expression of the man driving is just like "meh" lol.
Daaaammn booiiii!!!😮
that thing is a animal
Mannnnn All I can say is Got Damn 😂😂😂 Ron I’m going to hit you up next week man so we can get started on some of your fleet up there!!! 👍🏽
What price for that project ?
That's one nasty fastmaro !
Them kitty's are toast!!
Monster
That thing is ridiculous. I imagine this build cost close to what the car itself did.
Easily
I love it!!
You didn't mention the cam.
FEROCIOUS
What size motor?
427ci
Paint it Black with a red light in front and you have a new Knight Rider.
Yeah buddy
Sounds better than any hennessey
I don't know how you guys do it, I've got a mere 625 NA (fly wheel) horse in my 93, 9" rear end and I just keep blowing ring and pinions, only thing I can't hurt is the T-56 BW, been road racing this car for 30, years, 220 thousand miles have never opened this tranny, I don't know how that automatic could ever take it, but GM sure can make some good stuff, really cool video though man, that thing is pretty snappy.
25g sequential M6
Yes officer it’s stock it can’t go more then 75. 😂😂😂😂
What do these people do for a living to afford a build lost like that
Business owners that grinded out of years building a business while most just do enough to get by........
👏👏👏so nice
Nice build but I think this would be far better and enjoyable on a 10 speed Camaro
Dat wud b krazy 🛸💨💨💨💨
I doubt it. The sequential tranny is much better and more fun with this high power.
😂 It’s got a sequential .. Way better than the 10sp.
😂 O wait, you are serious ? 🤣🤣🤣
🔥🔥🔥🔥🏁🏁🏁🏁👑👑👑👑
thats so cool
👌
Bad ass build! But not wearing seat belts? Not that best idea on a public road.
I wanna build my zl1 but then I wanna pay it off first 🤣
👍loveit👍
how much $$ is this??
About 75k+
Please make more videos like this. Especially with the GT500!
The 500's cant hang with these Chevy's
@@VinemontWelding are you sure about that?
Should have brought my camaro to you guys instead of these other people.
Been waiting a whole year on a stroker kit build in ATL.
Good God...
Question,if im paying a $2800 gas guzzler tax on my ZL1 why did Chevy put afm,vvt lifters in the engin?im obviously dont care about mileage
Good point !! , I paid it also.
Calm down
OMG
Jesus
10 Speed ???
M6 sequential
Y’all are putting that stock bottom on the edge will that much power.
Stroked with a strong bottom end that motor with those heads and cam will produce 1800hp
Reread
It’s a built 427 LSX. The beast is built from the rubber tire up. Beautiful 6th gen
This shit is just straight brutal
5 point harnesses- cmon guys.
Rollcage ✅ seatbelt ❌
😅....I need 500hp more to have that same power
Do it!
@@RonatVengeance that'll be way too much power for the streets, leave that to the track guys
Same lol at 750
promo sm 😂
The GUM CHEWING with his mouth OPEN was DISGUSTING.
Driving without seatbelts. 🙄
YEAH , UNPROFESSIONAL AND INSANE…! 😮
Still about 400 horses shy of Fat House Fabs Twin turbo GT350 1600 R package. 1697 to the tires!
ALWAYS A WISE GUY POINTING OUT THAT A TOM DICK AND HARRY HAVE A BIGGER , TRIPLE, SUPER DOUBLE WHATEVER 350 500 HELLBENT SOMETHING THATS WAY FASTER ….. AND FORGET TO MENTION IT COSTS WAY MORE TOO…! 😤😵💫🤯 GREAT VIDEO EXCEPT THE NO SEATBELTS.. 😮
Yeah, but it's a Ford, still way short of the LT1 Grub worm.
That's right, 😂 nobody cares about a F---, I can't even say it !!😂
Nice car but the gum chewing killed the video for me. 🤦🏼♂️🤷
The owner needs to give that gum a rest. Nothing like watching somebody, chew with your mouth open
If you're not a car guy, don't bother posting.
YeeeeeeeOOOOOOO! That muhfuckas ROWDY
I need to sell some organs
Too bad its so dam heavy
Get you some😂