Everything You Need To Make 1000 Horsepower With An LT1 or LT4 Engine! (6th Gen Camaro, C7 Corvette)
Вставка
- Опубліковано 26 сер 2024
- Aiming to get this cam phaser issue fixed this week and get back to making more videos. Hope this list helps someone with their build though! Here's the parts lists from this video:
GPI drop in Diamond Pistons + Compstar Rods - $1880
Frankeinstein Heads - $2000
Brian Tooley Racing Stage 3 Cam 32% Lobe + DoD AFM Delete - $450 & $1000
Katech high volume Oil Pump, C5R timing chain - $535 & $160
Late Model Engines VVT Delete Front Cover + Billet Timing Chain Tensioner - $880
CSP 2" Long Tube Headers - $1,600
Magnuson 2650 Supercharger - $8600
Forced Induction Interchillers Stage 2 - $2476
LT4 High Pressure + Low Pressure fuels pumps and injectors - $1900
DSX Tuning Low side booster pump - $1000
Katech 103mm Throttle Body - $750
Rotofab big gulp intake - $589
Mighty Mouse V3 catch can - $465
ARP Head Studs - $416
ARP Main Studs - $240
Manley Extreme Duty Intake/Exhaust Valves - $530 & $530
Rear End + 10 Speed Trans:
Geforce 9" Conversion Kit - $8649
BMR Lockout - $310
One Piece Driveshaft - $1075
BMR Control Arms - $230 x 3
Circle D Upgraded Transmission - $3245
Circle D Torque Converter - $2500
Houston House of Power TCM - $1000
Thanks for watching!
Follow me on Instagram: / esbei2ss
Follow me on TikTok: / esbei2x
Use code "Esbei2SS" for 5% off at ExtremeOnlineS...
Use code "Esbei2SS" for 5% off at FIInterchiller...
Use code "Esbei2SS" for 20% off at www.ShineArmor...
Use this link for 10% off of Corbeau Products: corbeau.com/?r...
I feel like a cheaper alternative for LT1 owners could be to just buy a crate LT4 or one from a crashed, low mileage ZL1/Z06 to eliminate the entire machine shop section lol
That’s exactly what I did. But to swap into my 1970 c10. I Bought the LT4/10l90e from a wrecked 32k miles 2018 zl1 Camaro . It came with everything needed for the swap. Motor/trans, ecm,tcm, wiring harness, gas pedal, and many upgrades like the griptec pulley, aftermarket elite engineering catch can, Nick Williams 103mm throttle body, forced induction inter chiller, and a roto fab cold air intake for a Camaro. I got it all delivered for 15
@jessdigs where did you purchase?
Good info for a safe and reliable build. Can't stress enough on the rear suspension upgrades
Dang bro 50k. I think I'm staying stock and spending money on gas.
Dude no doubt you're better to start off with zl1. I get it though i built an ss to. And if 500 to 600 wheel is the goal ss all stock with procharger or heads cam is the way to go. Once that 1000 number comes into play start lt4 for sure. I have a c7z and just bolt ons since its a time attack car but i look at 2650r like once a week lol. Good find on the fuel system stuff. 💪 awesome car dude!
Appreciate it!
LT4's are definately better than the LSA like mine. All of them are expensive to upgrade right. Nice work!
You forgot about lifters, springs, pushrods etc
Good stuff thanks we need this video
I'm hoping for a similar set up motor wise but a turbo setup i currently have full vikings and bmr suspension parts and aerospace brakes 15"'s all around and just basic bolt ons and e85 haven't posted a pass in a long time but it's much faster now
Dude i just bought a 2014 corvette procharged for 38,500 and you just listed 50k in parts not including a car. Holy shit.
Yeah, reliable high HP $ is no joke lol
sounds like you gotta steal? a 2014 c7 w decent miles is already around that price w out mods
I have a 22 ZL1 1LE . Mag, cam, ported heads, johnson lifters, trunion upgrade, btr spring, pushrods, ktech pump cover and 103, roto fab,17/8 headers, 3 inch out the back, wires, boots, 3 upgraded coolers...( I'm sure there is more) of course brakes, sway bars, that bs bar in the rear end. I think its almost 800 at the wheels...? I am pretty much out of fuel at this point, and really don't want to spend another $10,000.00 on pumps...
My car made north of 800 with the 3.0 whipple, stage 2 BTR cam, pistons/rods, built heads on 8lbs of boost and 93 octane. If you throw a DSX low side booster on yours, you might be able to stretch that a little more
@@Esbei1LE Hi, never ran mine on a dyno yet...it seams rich to me(I know nothing). Was it over 800 at the wheels? We only have 91 out here (az) but still I think my boast is 11....? thanks
Yeah, well over 800. I had stock LT4 low and high side pumps and injectors@@davidciesielski8251
Thank you for this 🤘
Great videos and a lot of information. Happy you got the car where you want it. Car looks and sounds amazing. I have a 2010 Camaro SS with the L99. What do you suggest mods to do first. I’m not looking for 1000 HP but maybe close to 500 HP? Supercharge it or Cam it.
If you want better gas mileage, grab a supercharger. You can also always take the blower off and put the stock manifold back on to revert it to stock if you want to sell it. Camming it sounds awesome but eats gas crazy and is a little more time consuming to revert to stock lol
Sounds about right 💸💀
Lol I'm going the twinturbo route
Did you run your BTR stage 2 cam on a stock converter and if so how did it run
Runs great, no issues. Anything Stage 3 or over you need a converter though
@@Esbei1LE I want to run headers and cam, I'm just iffy about voiding the warranty. Any suggestions of the safest way to go about it.
@@MerkabaSS Zero chance you'll have warranty after doing a cam but it'll be a fun car with a cam lol. Some dealers are chill about headers long as you don't get a tune but tbh you won't really gain power without one so I'd hold off. If you wanna do heads/cam/FBO do your head internals, upgraded oil pump and DoD/AFM Delete with the cam and you should be good. Those are really the only things that fails on these cars
I think i shit my pants price wise 😅
Almost the price of a zl1..are a good used one. You have to pay to play, horse power is not cheap!
A 2ss is around 45-50k, and adding another 50 in mods is 100k. You can get a nearly brand new zl1 for 65k. Or a new one for a little over 70.
🔥
I lost 10 health points every time he listed a price… cheapest possible build from scratch is 65-70k😢
Can you run the same setup but with a procharger??
Yeah
Bro I love Chevy but I can just get a 5.0 and be ok with 3-5 mods and make 800hp and I’m looking for mods to make 800hp or 750hp boosted
Get the Mustang cheaper to build unless you know people that can give you good deals on your build
Procharger over maggie as well. And im on meth it works fine. Also maybe intank fuel pump
why you went with csp headers instead of kooks or other brands
From what I understand the CSP headers fit slightly better in there and they're 2". Any 2" headers would be good, and Kooks is great. Just the way they fit is why I picked those
They have 3 options of headers which you recommend & any other brand what would you use ?besides csp
@@Traknn Kooks is definitely my second choice. Texas Speed is alright, American Racing is alright, but you definitely want the headers to be somewhat pricey because the cheaper ones can melt and have bad welds from what I've seen.
Are you able to upgrade the lt1 rear breaks too Brembos like the “SS” and lt1’s and SS have the same driveshaft ?
Driveshaft is the same, and I'd imagine you can upgrade the brakes
@@Esbei1LEI seen people say it’s impossible, but I was just wanting to upgrade to rear brembos since lt1’s you only get the brembo up front, thank you going to run stage 2 cam and wanna make sure driveshaft doesn’t snap
So am I better to go max effort NA ? For now and save for a ZL1 or Vette ?🤣
If you want to go full bolt on or just buy a blower then an SS is great. If you want to save yourself a headache and some money, get an LT4 planform car.
@@Esbei1LE thanks man!
overall would you recommend the 2650 over the Whipple?
Yes. The noises Whipple's make are very unnerving and their customer service is god awful
@@Esbei1LE how what about a D1X I've been trying to figure out what I want and I can't choose between a D1x or 2650
I'm just trying to make 850 whp. I was going to do built bottom end, Fully upgraded fueling, I'm already cammed with ported heads, and lastly I was goin to do meth if needed. If I can make 850 without meth and just running straight E that would be preferred. However Im stuck on Witch Supercharger will help me reach that power goal without running meth. So If I can get your opinion on what do you think would be better to help me reach that goal? A D1X Procharger or Maggie 2650
@@AGodNameFleet ProChargers can still get heat soak (I thought the reason people get them was to avoid that) so idk. It really depends if you want all your power down low/midrange with a top mount or in the upper RPMs with a centrifugal blower. I've always wondered why people don't just go twin turbo instead of centrifugal though because it has to "spool up" similarly to a turbo but the amount of power is limited. I like having power down low and the whine so I'd suggest a top mount (2650) but it's up to you chief lol
@@AGodNameFleet You should be able to make that on low boost and 93 octane. I have no meth in my car and I'm not on E
How are you hitting 1k on that fuel setup? I have the same setup and was told to get past my 753whp ill need meth and or port injection. Im procharged btw.
I've seen guys hit 1000 with the DSX low side booster. I'm not a tuner so I don't really know how that side of it works but I know it's possible
@@Esbei1LE we shall see. I'll probably be going to RPM in Delaware at some point to get methed up and move up to a d1x procharger.
Or just put lt4 pistons and rods in the lt1 block, and a turbo with port injection intake manifold
Could buy a used LT4 as well yeah, good idea
You forgot lifter. Like johnson.
Hpfp and lt4 injectors
I said the LT4 fuel system in the video coupled with the DSX booster pump, but I assumed Frankenstein does lifters and dual springs when they do a head upgrade kit. I should have clarified that to make sure people know to get better lifters! Appreciate the comment
@Esbei2SS its beast i didnt hear that part my bad 😅
@@michealbeaurivage8422 sneaky man!!
nvm bruh
50k 😂😂😂😂
Ant
Might as get a Mustang 😂fuck that shit expensive too build a Camaro