Це відео не доступне.
Перепрошуємо.
8 Fishing Hacks You'll use (Very cool )
Вставка
- Опубліковано 25 кві 2021
- Ta Days video is 8 fishing hacks that are very useful , and i hope you find something you like . Thanks for watching and click subscribe for more DIYs
For Fishin N Stuff Gear visit the Link below
www.etsy.com/shop/PebsPrettyf...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
hybridlight.com/discount/Fish...
enter code below
FishinNstuff
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
www.katfishclothing.com/?ref=Fishinput
Enter Code. FISHNSTUFF at checkout for 10% off all purchases
Battery base
www.amazon.com/dp/B07V1KDKZ6/...
clear unpainted Lures,,,,,,
www.amazon.com/dp/B0858XWVNW/...
glove light
www.amazon.com/dp/B08R9VPBP8/...
Amazes me how many different accents America has . Thanks for the tips .
Hey Keith, If you take a small piece of adhesive tape and stick it to the bottom side of the tab that holds your reel to the rod you can write the size (lb. test) and date that spooled up that reel. I have a lot of rods and reels that I use for different kinds of fishin' and this really helps.
Thanks, that's probably the only tip I'll actually use here!
Lol
That's a good idea man
I use my label maker to do that
@@BobBohner4851 you stole my idea lol . I thought of that too lol
Right here, is why you are the King of DIY’s ,🤴, but I really like the ladder in the neighbors pool…..I got to go !!!!!!!! LOL 😂. Take care, and Thank you for all you do my friend Keith 👍
watching this while tying leaders for tomorrow looking at my coozy spool holder, lol Ive did that for years, love it.
Brilliant stuff Kieth , love your accent!
Thank you for your DIY underwater light videos. They are AWESOME! And I built my own AWESOME fishing light with the drill battery pack and on off switch!!! I have always shied away from wiring and electrical but your video was so inspiring that I just went and did it. I have never soldered before so I had my doubts. I have to admit that I was shocked😅 when I hit the on switch and the light about blinded me and my husband who was sitting next to me on the couch watching fishing videos. He was so proud he sent a photo of my light to the whole family. He can’t wait to see which of your projects I will do next. The real project is gonna be talking him into getting me a drill press cause those sinker casting videos are AWESOME!!😂😂🤣🤣
UA-cam is finally putting your videos back in my feed.
If you know anybody that installs doors, ask them to save the big rubber bands that are used to protect the hinges during shipping. They have several uses, they fit around most bait casters and the larger open faced reels, if you run the small 12v (6x3x2) batteries they will fit those to insulate the terminals. Thanks for all the great info.
0
You have got to me kidding me! A battery power connector mount can virtually replace me from hauling and lugging around my heavy marine battery to and from my boat after a day on the water?!?! Are you trying to tell me all I need is one, or maybe even two if feeling cute, of these adapters and I can run not only my fish-finder and bilge pump, but even charge my iPhone or other devices as well? Well, the jokes on me because it works!!! Wow! I wished I'd have stumbled across your videos months ago as I would've saved me a bundle of cash! Thank you so much brother for sharing these hacks and tips!
I saw these and thought what an awesome idea . Then made this video , only to find out alot ofthe bass guys where using them to run their deapth finders before I even knew lol .
i have a small aluminum boat, and been dreading the day i strike a hole. now thanks to this video. i'm confident i'll be fine :)
As usual, more great hacks. I don't know why i didn't think of them myself. They seem so simple when you put them out there for us.... Thanks for the info, and as all your videos are, always great.
Number 4 is unbelievable! Thank you!
Awesome as usual. Thanks for sharing.
Honestly, this is the best informative AND entertaining fishing youtube channel out there! Thank you for all the content!
I really appreciate that brother
First time watching your video don’t know how i never seen you before but I had to say very handy fisherman.Amazing video me as a younger angler i actually learned something today !
Thanks !!
I appreciate you watching
You are BRILLIANT!!! Thank you for all the help and great ideas!
This guy is a GENIUS! Why didn't I think of putting the spool in a bucket of water? I told you, this guy is a genius! And those spool holders? Genius. OH, and the LED light pole? Genius. This guy is a genius. Liked, subbed, genius.
agree
"look at the table!" then makes ufo noises ha ha ha. youre a blast to hang out with im sure =D
Lol thank you , I can get along with anybody lol
@@FishinNStuff well one day I’ll get down there. But I want to do crustaceans.
@Ryan Tripp negative
I use safety pins to hold my hooks and swivel snaps...easily organized and easy to get one off without them getting tangled
I love the dual purpose coozy/line holder. I always wish I brought a coozy every time I'm in the boat.
Love You're enthusiasm it's great 1 thing I've found is found is the gloves are in fact a great idea if you can get him on your hands If your hands are oversized you'll never get him on but I but I love the idea I wish it would work for me. I really wanted it to work kind of handy to have if you've got car trouble too and you need to get underneath somewhere where where you can't see hopefully they'll come out with some bigger sizes.Thanks for sharing You're hard work.
They need too come out with different sizes . I appreciate brother
Another great video. I will definitely be trying out the battery idea. Maybe for a black light for surf fishing at night.
Great Keith thanks a million!
Hi, i love your comicalized fishin vids,you always Amaze n make me laugh! God bless. from sth australia.much love!
Thank you Mate and thank you for watching em
Dude, you had my wife and I rolling! Love your personality and videos!
Thank you Sir I really appreciate you guys watching
These hacks are GOLD pure and simple!
Loved the video!! Always entertaining. ROFL at the birds 😂🤣😂. Loved the line spoiling hack - probably saved people $45 on that one.
Sweet hacks/tips bro...I live being able to di things for my self so this stuff is gold. Cheers.
The battery and light combo is very similar to my setup for flounder gigging... very nice love the video...
I melt my lead into pellets by poring the molten lead into a bucket of water that way it melts faster and I can measure out how much I need more easily
Genius!
Nice! That's a great idea, thank you
Those were awesome!!!! Seriously! I thought the first one was great (I have a cabinet full of beer koozies that are now destined for a higher purpose! 😆) but then I saw #2! Perfect for my kayak depth finder! They just kept getting better! Thanks so much for the video!
Send me some please. I only have two
As always your videos are great to watch, keep them coming.
The battery hack is something I started doing recently. I couldn't afford a battery for my fish finder so I wired it up to my drill battery. It worked out better then expected. Though having a adapter would make it easier then clipping on the pins. Lol
Keith, those fishing hacks gave me some good ideas. Thanks for posting that video. I never considered that the colors on some of those expensive lures are to attract fishermen instead of fish. But I wanted to point out that a good source for lead is an old car battery that no longer works. Simply drain out the acid (be careful cause could cause serious injury - and be sure to dispose of properly), then just rinse the inside of the battery with a water hose to clean out the remaining acid. Once it's cleaned out, take a saws-all and cut off the plastic around the battery to expose the lead Inside of it. Inside the battery is lbs of lead that can be melted. My cousin showed me that trick. That's why car batteries are so dang heavy. Just wanted to point that out to your subscribers. Happy fishing y'all.
P.S. Can you post a video that shows how to make your own fishing rod holder out of aluminum using those alum brazing rods, that automatically sets the hook when you get a bite. I think they are spring operated. I seen a homemade one before but have never seen a video on how to make one. Thanks Keith.
I night one if those but never got around to figuring out how to make it simply . They are a little detailed
Another awesome video. Love Hack #4!
Thank you, for these!
Excellent video! Thanks a million. Looking forward to trying some of these.
I paused the video just to say bubba, I was looking for a movie to watch and I've seen everything new and old...! What to watch? Oh!!! FISH N STUFF!!!
😁 thank you . And thank you very much for watching.
More great stuff, thanks!
Go to your local tire shop, pick up all the garbage tire weights... great lead source
Well then you just grab the ones that are lmmfao!
Love that bird 🐦...🤘🏿🐾❤
IIIII LIKE IT!!!!!!! really cool.. now i have to go back and binge watch all those other videos... J
That glove light would come in handy when working in dark places when a regular light gets in the way. Like in an attic working on electrical lines
Ordered the battery attachment, love it. Thanks for sharing. Love all your videos.
Thank you Sir
Great video just a thought for the clear spooks I always just paint them with any color I have or you can dip them in acetone to seal them my first ones I just used them straight out of the pack and they leaked and rusted the rattlers in them
Thanks for the acetone idea. I've had a few rattles leak too!
Loved the Hacks great stuff to know.
Another great video can't wait for the next one.
I am impressed. Thank you for the great tips.
Stumbled into your channel last week...I am now an addict....thanks!!
You welcome lol . I really do appreciate you watching though
Thanks for reminding me about the battery adapters I got busy and forgot about a project i was gonna build and video for the channel. Thanks for the link it saved me from searching.
Thank you for making these they help a lot
You are adorable! Thanks for the tips!
Another great video Keith!!
Great stuff from end to end! Thank YOU!
Thank you
Yep, them hacks were freaking awesome 👍🏻👊🏻
Now thats some cool stuff !!
Another brilliant video thank you ....stay safe
That was Super Awesome! Love the video!
Always Glad to see a Fish n Stuff notifications 🤘🏽🤘🏽
Sweet ideas I will be trying some out today !!!
2:58 ❤️✊🏾👍🏾. My fishing buddy and I went night fishing. Worked out GREAT!
I love night fishing
That battery hack was the awesomest of all your hacks so far! You're a dang genius!
Lol thank you
Another great video thanks for sharing
Great video love the DIY stuff
Always love seeing an upload from you Mr. Keith! Great stuff as always!
Used the bucket hack for live bait.. it's awesome! Thanks
Great Video. We subscribed! We love the outdoors!
Battery adapter awesome gonna do this myself for my nav light keep it up buddy
About 30 years ago I bought my dad an electric melting pot, a bunch of Do-It molds and gave him some small and medium muffin pans. The muffin ingots were just the right size to drop into the melting pot for making sinkers and jig heads.
That IS a freaking AWESOME idea!!!!! I LOOOOVE that light idea!! That would make for a muuuuuuuch better 360 light!!!! Thanks so much for your awesome tips!!
Thank you I appreciate it and I appreciate you watching
No Doubt, about it,,That's Purty Dang Awesome Right There Y'all 🦈🎣👀😁 Keep It Reelin Brother
Nice
Definitely going to use a couple of these
Great Video!
Awesome video man ! Loving these informative videos! Hey, one question, what volt battery were you using during that test? I just ordered two of those battery adaptors. One for the fishing light, and one for my kids power wheels. lol
may the force be with you that is cool
Awesome video! Thanks!!
When you and your buddy are fishing for Stripers on the Hudson River, and waiting for the tide to turn, and you see a new video from FNS...priceless.
Thank you, Keith!
As usual, a very cool video
Thanks a million 🙏
I love the battery one I’m going to make it for my boat thanks
learn something every time i watch!! keep up the great work!!
Very cool thanks 🇨🇦👍
Right on. I've found that the best way to keep line on a spool is with a hair band. Thread the line through the hair band with a needle and put it on the spool. The band will secure the line on the spool, and you can pull/unwind the line off the spool without ever losing it.
That's a good idea
I'm gonna use that one too ...stolen good idea ..lol
@@MikeSmith-nu9wt It works real well...hair bands are inexpensive.
U R A STAR! Great, great, great!
Awesome man thanks for the game, gonna whip me one up and guide them to ur video when they asked me where I learn this snazzy trick in California!!! Thanks man 👍🏽👊🏾💪🏾
Luv the hack's thanks for the info!!!
As usual you gave us some awesome videos.
Great video! Man awesome idea with the battery attachment!
That’s awesome stuff right thuuurr!!!!
Yes sir, the battery hack was awesome.
Got a few chuckles out of your video...first one I've seen. 👍 Thanks for the tips I'll watch your other ones too...
Thank you Sir
Another awesome video. Now I just need some more time to use them.
Love your ideas and videos!
Thank you very much
Those are some fantastic hacks Keith. Thanks for sharing.
Thank you Sir
All were good, the battery hack was My favorite. Good job Man.
That seems like a pretty good idea it also looks like it'll work really well
Cool video and cool stuff.
Thank you sir, I go to tire shop and get lead weights for tires that are used, they're usually all over the ground or ask and sometimes they give them to you for free.
You know wat else works reel good(pun intended) are mommas hair tighs you know the 1s that look like thick rubberbands. Just put them on the roll of line and it holds it down pretty darn good if I say so my self. I do enjoy your tutorials keep em coming my good man!💯💯💯
Thank you brother
Your videos and ideas (even if I don’t use all of ‘em) are great!
That's awesome!
Whatcha waitin one!
I love that Awesome Battery/Light
Hack👍
Think it would run a fish finder?
I ruined 2 18 volt Ridgid lithium ion batteries by using them to power 12 volt lights (for frogging, 1 battery for 1 light). They would never charge after that.