For an even less expensive weight slide, use the soft tygone tubing and paper clip. You had the soft red tubing. Most hardware stores have lengths of the clear soft tubes. About 1/2” of tube with paper clip works great for a slide. I haven’t purchased a bobber stop in years. Most stores carry packages of little rubber bands in the hair care section. Do a full hitch around the line and pull it tight. Instant bobber stop. You can even trim the excess loop and it will stay in place for multiple fish. A couple hundred bobber stops for about $1.29.
Take a Coffee stir straw cut it up . Also that little spout on the WD-40 when the can gets empty cut the Spout up for Sinker Stops . Good Idea`s Enjoyed it
I used these with the Team Catfish weight slides to make a ua-cam.com/users/postUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.
Those silicone beads can be pulled over the swivel a bit and completely cover the knot. This will give you complete protection from any wear or abrasion
Thank you Keith another great video. Another thing you can do with the X tube wrap is cover a tiller handle with it I have a 1992 Evinrude 25 tiller that the handle cushion was coming off and it was hard to get a comfortable grip I took some of the 45 or 50mm wrap slid it over the tiller handle shrank it down and BAM a new tiller grip and I used red to make it more visible an easier to find at night or in a hurry it stands out .
As always, you never disappoint; just great content and great humor; what more could any fisher want? Exxxxcept, maybe a dancing bunny singing "let's go Brandon" And that right there is awwwwwesome!
Lol . I always try and throw in the memes that are trending, it's just about making people laugh. One person is already fussing about it being political , they must of not have been subscribed too long lol
Me and my cousin are on the opposite sides when it comes to politics and we have expressed our feelings, from time to time, over the years (60++++++)This cause some friction, but he's my kin, so we continued to interact. Here of late we have been interacting more and more, because we both love to fish, just like I did with his Daddy (who had the same beliefs as his son, or vice versa.) Now we don't even mention politics, as I did with his Daddy. We know where we stand, we know who we are, without a word. What this taught me was, I could miss an opportunity , whatever it may be, like talking about fishing, with a family member, co-worker , neighbor, friend, or random stranger over something as simple as my , or their politics. How dumb is that, jus sayin. Our world is too weird anymore. I read an article, today, where a guy shot his neighbor because he thought his politics was different than his. (Happened in Ohio) Then I read an article where a guy injured a bunch of people at a rally, yep same thing. How buggered up is that? So what am I trying to say here? Danged if I know, maybe just food for thought. Don't normally respond to videos or the likes. Thanks for letting me get that off my chest. Thank a Veteran today, they are entitled 👍. Enjoyed the video. Stuff I'll use, fur shur. Fish On.........
I just found your videos. These are a blast, lifting my mood from darkness to enjoyment. Difficult to stop watching. Thanks for what you are doing here. I survive on 800 bucks a month disability income and definatly need ways to save money and/or stretch a dollar. Wish I had a pedal kayak but thats a dream only as I never seem to get ahead. This July had emergency triple bypass heart surgery. Good surgeon apparently. 🤪😊😎😎 Keep the videos posting. I'm not the only one who needs these for sure.
Makes a lot of sense for that paperclip. I bottom fish for Rockfish and Halibut and because we use like 80 pound braid we needed a weak point in case we hung up. So I went with a 40 pound line for my weight since 9 times out of 10 it was the weight getting stuck between rocks. Save a lot of expensive rigs by just losing the weight
What is even cheaper for weights is if you use a cotter pin, open it a bit put it over your line then put it through the hole in a large nut ( as in a nut and bolt) then open the cotter pin all the way so it can't slide off. if the nut get snagged the cotter pin will bend closed, the nut comes off. Another benefit to this is you aren't polluting the water with lead
A hack I like is spray flex seal. You can buy a cheap net and spray it with flex seal and rubber coat it cheap. Also spray large singers so they don’t knock paint of ya boat. Spray anchor chain you can spray yourself if you get carried away
Love your hacks ! Been cutting inch or so pieces of cheap gas line hose for swivel/ sliding weight bumpers for 30 years for cat fishing , works great . …. You do a good job brother !…… Fish on !
A GREAT idea for part of a future video would be to figure a fairly easy way to install those handle grips on a spinning rod handle all the way from the butt to the top of the handle (where the rod starts). I did one like this and it takes a lot more time, but has been my favorite rod ever since. The main trick is to get the tightest fit around the reel stem without having any irritating rough edges where you grip the rod/reel. There is a commercially made product that is like this which I first saw at the rod/reel repair shop. It was stupid expensive for a piece of rubber, so I tried to imitate as closely as possible.
Hook up a rubber tipped blowgun (Harbor Freight) to your air compressor. Blow into partially installed grip swelling it up while simultaneously jamming it on. Yep it works very well.
Tiny binder clips work for slides and then you have 2 hangers for the weights. Also air hose from your live well stone will be small enough for a knot protector. Youve really changed the way I look at my fishin' gear. Hack on man! 8646!
if you use a snap/snap swivel, put a silicone bead before tying your line than insert it to the tip of the swivel. Whan you reel in, silicone beads secure the swivel and your rod tip doesn’t get damaged.
Keith...another awesomely awesome fishin hack video my friend. Am really excited to try out the silicone beads and the sniper skin on a couple of my "tired" but still fishable rod handles. Keep up the great work and congrats on the ever growing # of subscribers. If you build it, they will come.
Let the inner tubes sit outside in the sun until they get good and hot then stretch them over the chain. Or, drop the tube into boiling water then stretch it over the chain.
Dude, I've got to comment. I like your style of explaining and humor. I love your 'southern accent.' You sure you're not from deep in the Southeast? lol Anyway, I've looked at quite a few of your videos and am impressed. You get down to the bottom line $$$ wise and explain the purpose, and why, plain and simple. I've learned quite a bit. I'm in the process of getting back into fishing for next year. Got my boat, currently modifying it and getting it ready. Keep up the good work man...............
That comment really means alot to me . I try and keep things simple and as cheap as can be possible . And in my opinion laughter is a medicine . And the world needs more humor now days , not less . I appreciate you watching brother
@@FishinNStuff Hey man, anytime. The world needs humor now more than ever. I chuckled about the green anchor mishap with you trying to demonstrate breaking the zip tie at the top. Then you came back and said: " Like I said, I'm gonna tryyyyyy, to break this and show you how this works." Hilarious. Look, keep up the good work and humor!!
HAhahaha that rabbit made my day, Even had mr 5yr old laughing. Thanx 4 your time and everything doing these fishing hacks.Much love from south aussie. God bless!
you are hilarious , but have some incredible tips, you could easily be making a million a day doing standup comedy you are a naturally gifted comedian!!
Bike tubes come in different sizes for wheel and ~tire~ diameter in this format: 26 x 1.75. Visit a bike shop to try and to get discarded tubes. Bike tube rubber is useful in many ways.
Love the how to's but I have to admit I've used the carolina rigging for half a century for catfish and for redfish and have never broke off at the swivel from the weight hitting it. I'm using 17lb trilene xt and the fish may abrade it near the hooks but never at the weights.
@@FishinNStuff The only time I've used that much weight is in surf fishing using surf weights. I find one oz to be okay but prefer 3/4 oz for most lake fishing. I'm using medium action 8' rods and if you add a big bait and a heavy weight it's just to much for accurate casting. Then again I'm not using catfish heavy gear so I'm sure you're right for those situations. In truth I've been watching catfish dave the last week to gain some insights into fishing for larger catfish. My 17' makee should be perfect for trolling.
I know you are in NC, I like Gaston, Tar River Res, Pamlico sound, Mattamuskett, Santee just to name a few. What are your favorites? I also use that red tube, to put another hook on my lures. I miss a lot less fish that way.
I found something that works just as good and is almost priceless it don't cost anything you just take the cartridge out of a used ink pen take the tip off of it and cut it into sections about a quarter to a half inch long and slip that on your line and it works just like the bead and it don't cost you
Love your video's! ❤ You keep me laughing, FJB!!🤣🤣🤣🤣🤣 AND I really love your hacks. I told all three of my nephews about your video's, UA-cam channel. AWESOME!!! Have you heard of CTJ? 🤣🤣🤣🤣🤣⛵⚓🇺🇲🇺🇲🇺🇲
I knew there was a reason I like this guy 9:15 other than he's a fellow N.Carolinians, well and a fellow fisherman, well and has some great hack and money saving ideas and there's 9:15 and he's just a funny guy and did I mention 9:15 ?
Release clips and cannon ball weights are nothing new to walleye fishermen I've been using them for years they are great for targeting fish at different depths you can go on the internet and find graphs that tell you what ounce weight and line length to run keep these good ideas coming it gives me other ideas that are useful thanks
I'll have to check that out, been wanting to get on some walleye for awhile now. Lake my dad lives on has a lot of em. Never been able to get on em though.
I had some hockey stick tape left over that I used to wrap my handle with. Well not my handle...the one that connected to a rod I found at the bottom of a lake with my anchor.
Keith...this fishin hack video was "awesome times seven" (or as expressed by my math teacher wife as "Ax7"). I also really liked how no bunnies were harmed in the making of your video...altho chicken fried bunny is a family favorite...especially around Easter...(if you get my drift). Anyway brother another great DIY video!!! Many thx!@!@!@
@@FishinNStuff I had a friend (Gary) in college that always bought domestic rabbit from the grocery store and slow cooked it on his weber BBQ grill in his front yard on Easter Sunday. When he was asked by people walking back from Easter church services..."what smells so good?" ...he would lift the Weber's dome and say..."The Easter Bunny". Gary had a warpped sense of humor.
@@FishinNStuff Amen! Its disturbing how some parents put more emphasis on telling/teaching their kids about the Easter Bunny, Tooth Fairy and Santa Claus than they do about our Lord and Savior...a sad commentary on the times.
@@FishinNStuff Yes sir, I grew up with them as well.. remember fix me a fish sandwich?..and let's not forget 'Larry the cable guy'!! Thank you so much for taking the time to reply. God bless 🙏 🇺🇸
For an even less expensive weight slide, use the soft tygone tubing and paper clip. You had the soft red tubing. Most hardware stores have lengths of the clear soft tubes. About 1/2” of tube with paper clip works great for a slide. I haven’t purchased a bobber stop in years. Most stores carry packages of little rubber bands in the hair care section. Do a full hitch around the line and pull it tight. Instant bobber stop. You can even trim the excess loop and it will stay in place for multiple fish. A couple hundred bobber stops for about $1.29.
That's a great idea
Take a Coffee stir straw cut it up . Also that little spout on the WD-40 when the can gets empty cut the Spout up for Sinker Stops . Good Idea`s Enjoyed it
All these diy videos keeps the dollar tree close to my house in business
I used these with the Team Catfish weight slides to make a ua-cam.com/users/postUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.
Those silicone beads can be pulled over the swivel a bit and completely cover the knot. This will give you complete protection from any wear or abrasion
Thank you Keith another great video. Another thing you can do with the X tube wrap is cover a tiller handle with it I have a 1992 Evinrude 25 tiller that the handle cushion was coming off and it was hard to get a comfortable grip I took some of the 45 or 50mm wrap slid it over the tiller handle shrank it down and BAM a new tiller grip and I used red to make it more visible an easier to find at night or in a hurry it stands out .
That's really a good idea man
@@FishinNStuff if you want put it in a hack video I would be proud if it helped save a fellow fisherman or boater some money
As always, you never disappoint; just great content and great humor; what more could any fisher want? Exxxxcept, maybe a dancing bunny singing "let's go Brandon" And that right there is awwwwwesome!
Lol . I always try and throw in the memes that are trending, it's just about making people laugh. One person is already fussing about it being political , they must of not have been subscribed too long lol
😂 Without a doubt, my favorite part.
Lol
Me and my cousin are on the opposite sides when it comes to politics and we have expressed our feelings, from time to time, over the years (60++++++)This cause some friction, but he's my kin, so we continued to interact. Here of late we have been interacting more and more, because we both love to fish, just like I did with his Daddy (who had the same beliefs as his son, or vice versa.) Now we don't even mention politics, as I did with his Daddy. We know where we stand, we know who we are, without a word. What this taught me was, I could miss an opportunity , whatever it may be, like talking about fishing, with a family member, co-worker , neighbor, friend, or random stranger over something as simple as my , or their politics. How dumb is that, jus sayin.
Our world is too weird anymore. I read an article, today, where a guy shot his neighbor because he thought his politics was different than his. (Happened in Ohio) Then I read an article where a guy injured a bunch of people at a rally, yep same thing. How buggered up is that?
So what am I trying to say here? Danged if I know, maybe just food for thought.
Don't normally respond to videos or the likes. Thanks for letting me get that off my chest.
Thank a Veteran today, they are entitled 👍.
Enjoyed the video. Stuff I'll use, fur shur. Fish On.........
People are way to touchy Feely for sure . I just try and help people and make people laugh. It's like a medicine the Bible says
The innertube over the chain, you could use wire ease (a jell electricians use to fish wires through conduit, slick as snail snot).
I just found your videos. These are a blast, lifting my mood from darkness to enjoyment. Difficult to stop watching. Thanks for what you are doing here. I survive on 800 bucks a month disability income and definatly need ways to save money and/or stretch a dollar. Wish I had a pedal kayak but thats a dream only as I never seem to get ahead. This July had emergency triple bypass heart surgery. Good surgeon apparently. 🤪😊😎😎
Keep the videos posting. I'm not the only one who needs these for sure.
I'm glad I make you laugh . My wife laughs at me all the time and I'm not even being funny 🤔
Very cool!! Those heat shrink covers might be good tool handle grips too. Thanks!
I agree
😂🤣😂🤣😂🤣😂🤣 bro you had me in tears with the bunny .. great video as always .appreciate the hacks! 🎣💯💪🏽
You’re a brother from another mother. Love ya man! LGB!
Funny that the eastwr bunny had to save that old fool. Hahaha
Makes a lot of sense for that paperclip. I bottom fish for Rockfish and Halibut and because we use like 80 pound braid we needed a weak point in case we hung up. So I went with a 40 pound line for my weight since 9 times out of 10 it was the weight getting stuck between rocks. Save a lot of expensive rigs by just losing the weight
Everything needs a weak point , even reels have drag because of that . We're I fish 40lbs ain't weak though dang 😮
Enjoy the videos! Think you owe Pebbles some new paperclips though. Have to say the little heart shapes on the paperclips adds a nice touch.😃
Hahaha
What is even cheaper for weights is if you use a cotter pin, open it a bit put it over your line then put it through the hole in a large nut ( as in a nut and bolt) then open the cotter pin all the way so it can't slide off. if the nut get snagged the cotter pin will bend closed, the nut comes off. Another benefit to this is you aren't polluting the water with lead
A hack I like is spray flex seal. You can buy a cheap net and spray it with flex seal and rubber coat it cheap. Also spray large singers so they don’t knock paint of ya boat. Spray anchor chain you can spray yourself if you get carried away
Lol . Yeah I've sprayed myself before lol . Ive done all those other things too on past videos
Learned something,...best of all I’m smiling. Continue your enthusiasm
Thank you Brandon! And bunnies.
That anchor sequence was brilliant
Thank you . I thought it was funny lol
Enjoying your vids man keep it up. Applaud your effort
Love your hacks ! Been cutting inch or so pieces of cheap gas line hose for swivel/ sliding weight bumpers for 30 years for cat fishing , works great . …. You do a good job brother !…… Fish on !
Thank you Sir that means alot
9:15 - And that's where I clicked the like button!
Greetings from New Zealand.
Thank you Sir
Man I've been watching you for about a week or so now I relate to your country slang I love your channel
Thank you Sir , I appreciate it . I just try and have fun with it
If you go to a bike shop, they'll give you all the flat inner tubes you want for free, and hairspray is great for sliding covers over anything.
A GREAT idea for part of a future video would be to figure a fairly easy way to install those handle grips on a spinning rod handle all the way from the butt to the top of the handle (where the rod starts). I did one like this and it takes a lot more time, but has been my favorite rod ever since. The main trick is to get the tightest fit around the reel stem without having any irritating rough edges where you grip the rod/reel. There is a commercially made product that is like this which I first saw at the rod/reel repair shop. It was stupid expensive for a piece of rubber, so I tried to imitate as closely as possible.
Do you remember what it was called
Hook up a rubber tipped blowgun (Harbor Freight) to your air compressor. Blow into partially installed grip swelling it up while simultaneously jamming it on. Yep it works very well.
Tiny binder clips work for slides and then you have 2 hangers for the weights.
Also air hose from your live well stone will be small enough for a knot protector.
Youve really changed the way I look at my fishin' gear. Hack on man!
8646!
Thank you Sir I always appreciate the tips people leave me . I love like minded people that think outside the box
if you use a snap/snap swivel, put a silicone bead before tying your line than insert it to the tip of the swivel. Whan you reel in, silicone beads secure the swivel and your rod tip doesn’t get damaged.
Baby powder works good for the tubes also. blowing them up before you apply will help stretch it out some.
That's a good idea
Excellent!
A whole lot of Awesome there Keith!!!
Liked for the Brandon and the bunny
Brother you the bomb.
Not only is your channel funny as all get out,your very informative thanks for the Buck family of Caldwell texas
Hey thank you for watching. Tell the family I said hi . Texas is awesome
Would love to see some kind of keel guard for a boat hack! Love this channel.
I've been thinking about that believe it or not
Keith...another awesomely awesome fishin hack video my friend. Am really excited to try out the silicone beads and the sniper skin on a couple of my "tired" but still fishable rod handles. Keep up the great work and congrats on the ever growing # of subscribers. If you build it, they will come.
I loved that movie 😁
@@FishinNStuff Ya...me too...its one of those movies that instantly makes you watch when you are channel surfing.
Happy New year buddy...hope 2022 brings you nothing but tight lines and sure hook sets!
My handles on my older stuff are cork that sniper stuff would protect it
hahaha, you win the internet. "Now let's see a bunny!" LMAO The Sniper Skin looks cool.
Lol
Tie a fishing weight to the end of your rope making its passage though the bicycle tube easier
That anchor and chain combo is genius! I wish I had a boat big enough for an anchor like that 😢
Thank you bud , for all the good learning you shared.
Thank you Sir for watching
I needed that. LOL... You keep doing these. Love the hacks love your style.
Another good one👍 The bunny 😂 😂
Lmbo
Good one!! I enjoyed the bunny :) :)
Let the inner tubes sit outside in the sun until they get good and hot then stretch them over the chain. Or, drop the tube into boiling water then stretch it over the chain.
Awesome, thank you fir sharing. Great video as always.
My favorite video yet thank you much
All of those hacks were pretty dang slick😜😜👌👌👌👌
Your Videos are always Great to watch & very informative..
Thank you Sir I appreciate that
Haha the bunny and let’s go Brandon was hilarious
😁
Dude, I've got to comment. I like your style of explaining and humor. I love your 'southern accent.' You sure you're not from deep in the Southeast? lol Anyway, I've looked at quite a few of your videos and am impressed. You get down to the bottom line $$$ wise and explain the purpose, and why, plain and simple. I've learned quite a bit. I'm in the process of getting back into fishing for next year. Got my boat, currently modifying it and getting it ready. Keep up the good work man...............
That comment really means alot to me . I try and keep things simple and as cheap as can be possible . And in my opinion laughter is a medicine . And the world needs more humor now days , not less . I appreciate you watching brother
@@FishinNStuff Hey man, anytime. The world needs humor now more than ever. I chuckled about the green anchor mishap with you trying to demonstrate breaking the zip tie at the top. Then you came back and said: " Like I said, I'm gonna tryyyyyy, to break this and show you how this works." Hilarious. Look, keep up the good work and humor!!
Brother you are amazing I cant wait for your next videos. Keeper comin.
Everything you show is amazing an it always works thank you for all you share
Damn you get two thumbs up just
for the FJB!!! clip!! The hacks are
awesome too!! Happy Thanksgiving
to you and yours Keith!!!!
You too brother
HAhahaha that rabbit made my day, Even had mr 5yr old laughing. Thanx 4 your time and everything doing these fishing hacks.Much love from south aussie. God bless!
God bless Mate
G'day mate luv the anchor idea was waiting for the table to go arse up 😆
😆😆
Man, gotta love this stuff......and FJB ! HAHAHAHA, you never disappoint. Thanks, God Bless and Happy Thanksgiving
Happy Thanksgiving
The anchor skit😂😂😂
Thanks for sharing.
Instead of inner tubes use heat shrink. I made me some tie downs for my truck and they don’t scratch the bed.
I'll try that . I thought maybe it would Mahe the chain stuff . But maybe not
Cool hacks thanks again for your experimentation on things
You had me at lets go brandon.new sub.
MERRY CHRISTMAS Keith and family.
Thank you Merry Christmas
Great ideas and entertaining at the same time...love your channel
You can use the bigger tube to make it go in easier then apply heat to shrink it to the chain
I use the green/yellow fuel line for weedeaters
you are hilarious , but have some incredible tips, you could easily be making a million a day doing standup comedy you are a naturally gifted comedian!!
I really appreciate that . I just try and make it fun to watch . I really appreciate you watching
Best part of video LGB
Bike tubes come in different sizes for wheel and ~tire~ diameter in this format: 26 x 1.75. Visit a bike shop to try and to get discarded tubes. Bike tube rubber is useful in many ways.
Love the how to's but I have to admit I've used the carolina rigging for half a century for catfish and for redfish and have never broke off at the swivel from the weight hitting it. I'm using 17lb trilene xt and the fish may abrade it near the hooks but never at the weights.
I guess a big enough child do it . I fished the James river with some guys that use 16oz weights
@@FishinNStuff The only time I've used that much weight is in surf fishing using surf weights. I find one oz to be okay but prefer 3/4 oz for most lake fishing. I'm using medium action 8' rods and if you add a big bait and a heavy weight it's just to much for accurate casting. Then again I'm not using catfish heavy gear so I'm sure you're right for those situations. In truth I've been watching catfish dave the last week to gain some insights into fishing for larger catfish. My 17' makee should be perfect for trolling.
I know you are in NC, I like Gaston, Tar River Res, Pamlico sound, Mattamuskett, Santee just to name a few. What are your favorites? I also use that red tube, to put another hook on my lures. I miss a lot less fish that way.
I like Wylie , Norman , TuckerTown , the James .
Great stuff. Love this stuff. You have some great ideas.
I found something that works just as good and is almost priceless it don't cost anything you just take the cartridge out of a used ink pen take the tip off of it and cut it into sections about a quarter to a half inch long and slip that on your line and it works just like the bead and it don't cost you
Love your video's! ❤ You keep me laughing, FJB!!🤣🤣🤣🤣🤣 AND I really love your hacks. I told all three of my nephews about your video's, UA-cam channel. AWESOME!!! Have you heard of CTJ? 🤣🤣🤣🤣🤣⛵⚓🇺🇲🇺🇲🇺🇲
I don't think so ?
ty for sharing buddy always good to seeya working on this stuff
Love every fishing hacks stay safe God Bless
Great comedy.
KEEP DOING WHAT URE DOING I NEEDED THAT LAUGHT & U SURE GAVE IT TO US. THANK YOU.
Thank you for watching brother
Thanks for a cool video. This is really awesome .
Thank you Sir
…finally subscribed, FJB, … let’s go Brandon!!!
Quality content as always .I love saving cash . And enjoy making things so this is always win win lol and humor got to love it 😀
👍👍👍😜🏴🦕🙂🤞✌
Always use dish soap for slipping rubber tubing on
Great video! God is good! God bless!
I knew there was a reason I like this guy 9:15 other than he's a fellow N.Carolinians, well and a fellow fisherman, well and has some great hack and money saving ideas and there's 9:15 and he's just a funny guy and did I mention 9:15 ?
Lol
Great content as always. I always look forward to your videos.
Thank you Sir
Great stuff I enjoy your hacks and videos
Thank you Sir
good stuff.
i'd put a bell on the release clip, and clip it to the tip of my pole! lol
Release clips and cannon ball weights are nothing new to walleye fishermen I've been using them for years they are great for targeting fish at different depths you can go on the internet and find graphs that tell you what ounce weight and line length to run keep these good ideas coming it gives me other ideas that are useful thanks
I'll have to check that out, been wanting to get on some walleye for awhile now. Lake my dad lives on has a lot of em. Never been able to get on em though.
I'd never heard of them . But most everything comes from some other type fishing . So it makes sense
Always Great Tips 👍🎣
Amazon must be watching you...they went up on their prices...lmao good job on the hacks I enjoy
They do that any time their computers see a spike in purchases. People keep buying the prices keep going up.
I had some hockey stick tape left over that I used to wrap my handle with. Well not my handle...the one that connected to a rod I found at the bottom of a lake with my anchor.
I've used baseball bat tape , it works good and is easy and cheap to replace
love the bunny
Awesome
Nice ugly sticks once again all great ideas thanks for all your videos and Merry Christmas to you and family
Merry Christmas to you too buddy
Keith...this fishin hack video was "awesome times seven" (or as expressed by my math teacher wife as "Ax7"). I also really liked how no bunnies were harmed in the making of your video...altho chicken fried bunny is a family favorite...especially around Easter...(if you get my drift).
Anyway brother another great DIY video!!! Many thx!@!@!@
Lol . Chicken fried bunny Mmmm lol
@@FishinNStuff I had a friend (Gary) in college that always bought domestic rabbit from the grocery store and slow cooked it on his weber BBQ grill in his front yard on Easter Sunday. When he was asked by people walking back from Easter church services..."what smells so good?" ...he would lift the Weber's dome and say..."The Easter Bunny".
Gary had a warpped sense of humor.
@@johnbush2798 I like Gary cause to me Easter is about Jesus not bunny's lol
@@FishinNStuff Amen!
Its disturbing how some parents put more emphasis on telling/teaching their kids about the Easter Bunny, Tooth Fairy and Santa Claus than they do about our Lord and Savior...a sad commentary on the times.
Another awesome videos! Thanks!
I liked for the bunny ;)
Lol
@@FishinNStuff 😁
Great job
youtube is failing to notify me of your videos! very frustrating yet thanks for this one now that I found it!
I appreciate you watching , yeah UA-cam is a dictator lol . The Algorithm controls everything
This is one of my fav fishing channels.. Thank you for the hacks and the laughs. You like to troll.. no shit! LGB.. ROTFLMAO!!
Lol . I just like old school comedy I guess . I grew up with Eddie Murphy and Richard Pryor . We did let everything offend us 🇺🇸
@@FishinNStuff Yes sir, I grew up with them as well.. remember fix me a fish sandwich?..and let's not forget 'Larry the cable guy'!! Thank you so much for taking the time to reply. God bless 🙏 🇺🇸
Thank you Sir for watching
Keith your awesome