TOB ebike VOTOL EM150-2sp EM200-2sp controller program, QS 138 70h V3 motor, Ebike1
Вставка
- Опубліковано 25 лип 2024
- www.tobebike.com E-lock gets wired to B+ battery goes through on/off switch, Go to 8:30 to skip chit-chat #qs138 #qsmotor #edirtbike #middrive #ebike1
- Спорт
Thanks for taking the time to show us the details about these controllers
Go to 13:04 port settings. Find the P port. Pull down menu and select “empty function” . (Of course save, write)
You love your old reggae hits .
Your the boss, watch your full video even though don't own this controller. I'm near pennypack trail hoping to see you there someday.
Thanks. I rode Pennypack a few years ago when I lived in Horsham . Cold days are best because no one is there 😂😂
Nice video, programming can be a nightmare but can make all the difference to the ride setting the right parameters
I roasted my EM200sp one ride and done. It was fun for 2 miles 😂😂
i have fixed it now, i copied every setting you had on the set up and my 3 speed settings did not match up and throttle voltages were all showing 0.02 so i changed them and i unchecked them on the port settings the same as you had and its working perfect ! thanks again
Congratulations
Mike or Dr. Chopper knows his stuff he’s built me a custom stealth B-52, he’s helped me with my new build my next ebike frame will be from him quality plus after the sale service is superior… don’t hesitate
I see. U figured it out
The Best Sunday Tv Show Ever Live & Learn🚴🌩️👨🏿🔧✌️
Thanks dude
Thanks for the detailed vid, I see there are two programing cables with can and without can. Does it make a difference which one I get ?
I think my bike is stuck in park how do I get it off and it still won’t turn on edit I have everything exactly as you have it
What are the best regen brake settings if you only have front brakes. I want the setting that will give me enough time to use the front brake safely.
Where do you buy the motor and controller in the US? Only place I can find is alliexpress.
Thank you so much for taking the time to demonstrate this for us! I have ordered an em150 2sp to run my qs 138 70H v3 motor. I believe the 138 motor has a hall phase angle of 120°.
Can you tell me if I will need to perform the self learning function to pair a qs 138 motor with the EM 150 2Sp controller?
Cheers amigo, awesome stuff!
It will be ready to run if you chose 138 option when you ordery
@@tobebike ahh that would be great! I definitely told them I would be using a qs138 motor, hopefully they get it right ;)
Thanks again!
Did you have any issues installing the drivers for your computer to recognize this USB cable? Some how the provided driver software is not installing properly. The programming software opens up but I can’t connect to the controller because my COM port is not connecting.
Hello sir do you have any used votol or Kelly controller that can work with my 2000 watts hub motor
why didnt you talk about any of th other settings on page 2?
Hello Dr. I have a 120A max battery. So I should set the bus bar current to 120A and also sport mode to 120A? Is this correct?
Thanks
Hi. Nice fun video
Flux weakening 15 or 105 which a better for 5kw bldc
Battery consumption is different?
I don’t race so I’ll ask the guys. I have a few tunes stored in my computer to import when needed. Personally im happy with the stick tune in the video
Hey man. Got a question for you. I have just purchased the em200 2sp and for some reason cannot get it to power up. Battery's brand new. Sitting at 80v, controller n throttle n motor are new . I'm not sure if I'm wiring the elock correctly
E lock is single purple/gray wire. I ad a switch and run it directly to B+.
EM 200 2sp has the red light will flash a few times when power is on
hello 10:30 u say that a flux wekening compenstaion did somthing wrong what was the promlem?
Do Lingbo and VOTOL use the same controller program? I have a Lingbo interface to flash the controller, but I don't have the parameter table like your Ld-em-v3 there.
I’m not sure. There’s a FaceBook group for “VOTOL controller tuning” . A great group to ask
Any idea what all the flux settings do/mean? like what is the difference between High mode 100 / 14 flux vs 100 / 10 flux?
Let me check . I just walked in
@@tobebike For instance on high flux weakening you have 5000 /5500. What difference would 4000/4500 be? I am playing with changing these settings, rpm stays the same but the "smoothness" of the motor changes. Depending on what numbers i have the motor either wants to bounce off the table or run decent. :)
can you explain how to wire the 3 speed switch and sportmode switch.
I’ll make another video in a few days.
Also need this video
Have you played around with flux weakening? Could you share your em200 tune? thx
I’ll make a video next week of the crazy fast tune
@@tobebike Also note that em200 2sp can do 320 A in sport for like 10seconds before falling back to normal speed busbar current.
I do not really understand what bus bar amp on page one does, everything is based on sports amp, so if you have 180 amps in sports, the gears are based on that. on em 150/2 sp
I was told Busbar Amps is 1, 2 and 3 gears .
Sport mode is separate settings as I’d in the firmware on page 2
@@tobebike I think it is on the slightly older controllers if you check with an amp meter then the switches are based on sport amp the first box controls rpm based on (hdc lowrst Speed: 7000) the second box you set amp in% based on amp in sports amp i have 150/2 sp sw:232 hw:1.13
@@goelectric8269 maybe it was an easy explanation to me. It makes sense when I’m riding. I set my busbar to 70a and Sport Mode to 140a. I’m having fun on the hillclimbs in # 2 speed, pulls sikk wheelies too. Definitely more fun with busbar set to 100a but it uses more battery
@@tobebike if you set as in the video sport 180 then should have 126 battery amp and 4900rpm on 2 gears I have to go out and see if it makes any difference if I set down bus bar in battery amps edit: No driften in power draw
@@goelectric8269 I’m a frame builder and I don’t understand sinewave controllers. But thank you for helping me understand it better. Let me know what you find out
Hi sir how to know unknown named controler wires for connect to the system for program change
Hi !! Can you help me ? Mi E-motorbike has a VOTOL controller. In the dashboard appears a MOTOR failure and says engine has 200 °C !!!! An it seems NOT true. Can you help me with this issue ? Thanks in advance !
There’s a FB group called “VOTOL controller tuning”. Try posting there because I never heard of this issue. My opinion is maybe a wire short. Inspect all your wires. Maybe it’s a bad temp sensor or wires are touching somewhere
Hey you can share this map?
I have votol em200sp and qs 138 90h
I like to get the maximum from this setup.
What’s your email. I’ll have to do it in the morning
@@tobebike thank you very much
@@ShoAlbo-oh6ur yes. Email?
@@ShoAlbo-oh6ur text me your email 484-522-0695
@@ShoAlbo-oh6ur yes
Is it the same software for the Em200sp?
Yes
I just watched the video 2x I did everything u did every page wrote the program lose turn power off and on still no one movement on the throttle as I turn it
What does your “display page” read? “P” isn’t on is it ?
@@tobebike p? Sfter u said controller error i seen that and like a code up top 0000000200 but also i reset (turn the key off and on) reconnected and it went a way but still no throttle movement
Hey man you don't happen to have the config file for that to you could you send it to me in an email maybe.. I have the 100 the 150 and the 200s
Yes maybe tomorrow. My brain is tired today 😂😂😂
hi , i applied your settings to my 200-sp controller and for some reason i am getting a flashing red light on my controller and the motor wont spin ? have you any ideas as to what i can do to correct the problem ? thanks.
Is “P” on? Check the display page
@@tobebike no its not and its showing no faults either. it was running at first without a sport switch as i was waiting for it to be posted. i put the switch on and when i tried it after it would not run. i took off the switch and its the same? it just flashes a long blip then 2 fast blips
@@andquin1476 is it a new controller? Like you haven’t used it on a running bike yet?
Reason I’m asking is because it’s common the 200 2sp needs a patch .
I don’t use the SP controller anymore because for some reason my computer doesn’t connect lately
@@tobebike yes it was a new controller and qs138 motor,
@@andquin1476 EM200 SP or 2SP
Wires video ua-cam.com/video/yLmT4m3XMdE/v-deo.html