Have to say this was a much anticipated video , I’ve been looking for some performance footage of this new motor , picture this in a quad bike frame , appreciate this a lot
Hi, I found out here on UA-cam that the QS138 engine has aluminum terminals, and the wires are made of pure honey, and they have not been cleaned of varnish, this leads to ignition of the engines. Can you check how you are doing with the q s 138 engine, the same? As for the long-range drive controller, there are aluminum studs inside that are used to connect phase wires and a battery, this is also bad
Hello. I have QS180 (encoder) + fardriver ND721200B. If I set the Motor Direction: 1, rotation clockwise. If I set the Motor Direction: 0, then first the rotation is coclockwise, and then clockwise. Tell me, what could be the problem?
What app is that you’re using for programming? Does that come with that controller or the motor? I’m a newbie and about to get into my first build and want to use that qs180. They sell kelly controllers but do you recommend this one you’re using in this video?
@@tsergio111 okay maybe this is confusing but in the function paras section of the app, try these settings. Disable the brake, park, follow, PC123 Set CAN to none Set gear to default D Sport is the only throttle curve that will feel choppy imo I haven't got it all ironed out yet but this and sport mode got me to a good starting point on my set up.
@@tsergio111 aight try this. Release throttle = 0 Weak response = 0 (I have it set to this but I haven't expirimented with it yet) Release throttle = 0 Throttle acc step 224 Double check you have sport mode set sometimes it goes back to line or whatever idk. Set ratios in speed 500rpm-5000rpm to 100%, this is how you really tune throttle response once everything else is working right if I understand correctly There's some good fb groups like surron Segway modders
@@IncredibleCisco you might not know this but unlike asi controllers fardriver has built in precharge circuit so it’s not required to run a precharge resistor with them . Asi on the other hand it’s required
@@IncredibleCiscowe asked Fardriver why a precharge resistor is not included in the circuit diagram included on spec sheet they advised it’s not required and is integrated into the design . I can only imagine that means a precharge resistor is built in or that the switching stages are not effected by inrush current
I have a question what are the pid settings nobody has videos explaining it all they say is leave it alone. That doesn't answer the question there is benefits in the pid settings
Hello, I immediately apologize for my English, I'm from Russia, I need your advice, how many kilowatts can be used for a long time of the qs138 3000w V1 engine, and what current ampere can be used as much as possible?
Always enjoyable. What cells are the cells in the battery? I wonder if they they will make encoders to be able to use a range of controllers? That acceleration is very smooth. Right now it seems you've got a pair of the motor and the controller. We both know that motor can handle more than what that controller puts out.
Thanks glad you enjoyed it . They are the EIG C020B cells 3.7v 20ah 100A in 20s1P for the bench test battery . This motor is going to need a bigger controller maybe a ND961800
hey man your chanel is great for nerdy guys like me ! anyway i was wondering ,how much would a motor and control system like that cost then man? that motor in a decent frame would be great it would be nice with like a motorbike style 6 spd gearbox i reckon anyway cheers dude
Prices really depend on where you are based as these are bulky items shipping can cost a fair bit, if you give us an email we can provide you more information in terms of cost kilovoltbikes@gmail.com
What are you going on about positive goes tight ? If your talking about the orange cable that starts up the controller it doesn’t want bolting down in a test environment , Also can you please explain how your supposed to test with negative when the wire you need to activate the controller connects to + Silly comment from another “armchair” expert 🤦🏽♂️⚡️
That motor is BONKERS! I think the motor worked the first time you throttled- it just spun the earth 😆 I just dropped a vid on undocumented Fardriver / Kunray motor issue. With your experience, it would be interesting to see if you've seen my throttle issue. Subd for more either way!
Some of these videos I swear people want you to watch them have fun but they don't want to tell you where to get these motors stuff that they have in order for you to have fun also. SMH
I'm putting this in my small Honda rear wheel drive... Thanks for the great details now I know how to set it up for my rear wheel burnouts 👍😎
Please show us the build once it’s finished ⚡️🤘
I can hear the inside of my motor rotating but the sprocket isn't
I think mine does this too
Did you manage to fix the Problem?
@@Kai-mc8wc no
Love to get a dirt bike with a blown motor, and put that beast on it, it should keep up with the $12000 Stark Varg for a 1/4 5he cost. Zoom Zoom
wow that thing will deliver some serious acceleration!
Mans on 1% like it was nothing
The workshop phone lives it’s life on 1% 😂
Always educational, I love you guy's/girls. Can't wait for more content on this motor!
Nice motor and video Bruv.
Hi brother!
I am writing to thank you for your video. Thanks to you, I was able to run exactly the same qsmotor.
Thank you!
Have to say this was a much anticipated video , I’ve been looking for some performance footage of this new motor , picture this in a quad bike frame , appreciate this a lot
Hi, I found out here on UA-cam that the QS138 engine has aluminum terminals, and the wires are made of pure honey, and they have not been cleaned of varnish, this leads to ignition of the engines.
Can you check how you are doing with the q s 138 engine, the same?
As for the long-range drive controller, there are aluminum studs inside that are used to connect phase wires and a battery, this is also bad
I want to use this qs180
For my KTM 85 build
What do you think should I go with qs138 instead.
yes its difficult to fit the QS180 inside a full sized ATV / Quad bike.
Will be next to impossible to fit inside a KTM 85
Thank you very much for your video very interesting I learned something about the Fardriver controller by the way I have one I'll stay tuned
Hello.
I have QS180 (encoder) + fardriver ND721200B.
If I set the Motor Direction: 1, rotation clockwise.
If I set the Motor Direction: 0, then first the rotation is coclockwise, and then clockwise.
Tell me, what could be the problem?
Beast carnt wait to see the finished project⚡️
Did you ever put this motor on a bike? Id love to see it in action
im wondering if it can handle 144v 300amps
Hope to see that thing in the raptor one of these days...
Good for small car project 😜
Love the video. Can't wait to see this beast! Keep them coming
Thanks for checking out the video . Looking forward to seeing it moving in a project
I need an encoder set up for my QS138
I wonder what the speed would be with that set up
What app is that you’re using for programming? Does that come with that controller or the motor? I’m a newbie and about to get into my first build and want to use that qs180. They sell kelly controllers but do you recommend this one you’re using in this video?
I’ve got a 84530 controller and that thing has some crazy throttle lag
I had a hard time getting rid of lag too, do you use the app?
@@nickzietlow6475 yea but seems like anything I change makes no difference
@@tsergio111 okay maybe this is confusing but in the function paras section of the app, try these settings.
Disable the brake, park, follow, PC123
Set CAN to none
Set gear to default D
Sport is the only throttle curve that will feel choppy imo
I haven't got it all ironed out yet but this and sport mode got me to a good starting point on my set up.
@@nickzietlow6475 low end feels better but still laggy
@@tsergio111 aight try this.
Release throttle = 0
Weak response = 0 (I have it set to this but I haven't expirimented with it yet)
Release throttle = 0
Throttle acc step 224
Double check you have sport mode set sometimes it goes back to line or whatever idk.
Set ratios in speed 500rpm-5000rpm to 100%, this is how you really tune throttle response once everything else is working right if I understand correctly
There's some good fb groups like surron Segway modders
can you please provide a wiring diagram? All the schematics I have found are not correct.
Hi..you said D is high speed...but what is DH? sometimes that also appears
do you know what DH means if D is high speed?
Awesome vid! keep them coming guys! It's what we all live for!!!! 🤩Can this whole kit be purchased from yourselves?
Yes we can supply you a full QS180 kit . We are just getting pics ready to put it on our website
@@KiloVoltBikes Amazing thanks guys, i'll keep an eye out for the update! 🤩🤘
good job, what cells use this battery?
i love the video edit on putting positive on controller without precharge LOL
Manual pre charge ⚡️
@@KiloVoltBikes dont do that with ASI controllers on public. They refuse warranty then :D
@@IncredibleCisco you might not know this but unlike asi controllers fardriver has built in precharge circuit so it’s not required to run a precharge resistor with them .
Asi on the other hand it’s required
@@KiloVoltBikes if they had kind of precharge it wouldnt spark?!
@@IncredibleCiscowe asked Fardriver why a precharge resistor is not included in the circuit diagram included on spec sheet they advised it’s not required and is integrated into the design . I can only imagine that means a precharge resistor is built in or that the switching stages are not effected by inrush current
I have a question what are the pid settings nobody has videos explaining it all they say is leave it alone. That doesn't answer the question there is benefits in the pid settings
How would that be on a go kart?
So that controller can be programmed by you through phone?
Hello, I immediately apologize for my English, I'm from Russia, I need your advice, how many kilowatts can be used for a long time of the qs138 3000w V1 engine, and what current ampere can be used as much as possible?
man you get to play with the newest toys, so jelly
What is the software/application are you using in your phone to get the motor parameters in running condition?
I have a 12 kx450 I want to convert to electric. Need 30 miles of trail and mountain singletrack. Would this motor and 72v 50ah? Do the job?
Hey whats the diameter of the motor?
Can I put sprocket on it ?
Always enjoyable. What cells are the cells in the battery?
I wonder if they they will make encoders to be able to use a range of controllers? That acceleration is very smooth. Right now it seems you've got a pair of the motor and the controller. We both know that motor can handle more than what that controller puts out.
Thanks glad you enjoyed it . They are the EIG C020B cells 3.7v 20ah 100A in 20s1P for the bench test battery .
This motor is going to need a bigger controller maybe a ND961800
@@KiloVoltBikes pulling a ton of amps!ayne plug some merch on the videos. Some awesome.ebike shirt could be made with Kilovolt as a name..
Anybody know how to wire a display to a fardriver controller I'm stuck?
Can this controller (ND96850) be used for me1507 motor?
hey man your chanel is great for nerdy guys like me ! anyway i was wondering ,how much would a motor and control system like that cost then man? that motor in a decent frame would be great it would be nice with like a motorbike style 6 spd gearbox i reckon anyway cheers dude
Prices really depend on where you are based as these are bulky items shipping can cost a fair bit, if you give us an email we can provide you more information in terms of cost kilovoltbikes@gmail.com
@@KiloVoltBikes im in sw france but im from hackney m8
that's soo cool
I want one :)
Awesome video guys love it. I just got my 180 in the mail so I was super excited to see you guys run it today. What do you think you will put it on?
We have a very cool project lined up for it . Will have a full video for it coming up soon
Where would the best place to cop a qs180 at?
What happened, I thought you was gonna put in something and show us what it can do
Shooting is better, I like to watch videos from myself on the stand
Dresses like a scientist in a movie yet forgot that positive cable goes tight and you should try with the negative if you want to test
What are you going on about positive goes tight ? If your talking about the orange cable that starts up the controller it doesn’t want bolting down in a test environment ,
Also can you please explain how your supposed to test with negative when the wire you need to activate the controller connects to +
Silly comment from another “armchair” expert 🤦🏽♂️⚡️
Comments on this channel like you know what your talking yet forgot you don’t know fuck all 😂
Harga berapa om
You MUST need to buy yourself 1000v gloves for working in this enviroment. take care
That motor is BONKERS! I think the motor worked the first time you throttled- it just spun the earth 😆
I just dropped a vid on undocumented Fardriver / Kunray motor issue. With your experience, it would be interesting to see if you've seen my throttle issue. Subd for more either way!
Dommage t'es video devrais être traduits en français 👍
Some of these videos I swear people want you to watch them have fun but they don't want to tell you where to get these motors stuff that they have in order for you to have fun also. SMH
Contact us via email if you would like to buy this motor
WhatsApp the Name of the App