#highways

Поділитися
Вставка
  • Опубліковано 25 лип 2024
  • Granular sub base, Design of mix for GSB layer, California Bearing Ratio, CBR, Functions of subbase layer, composition of subbase layer of a flexible pavement, grading of material, proportioning of aggregates for GSB layer, Minimum Thickness of Subbase layer, MoRTH 2013, Modified Proctor's Test, Testing of aggregates for GSB, Requirement of a GSB layer material, Flexible Pavements.
    My other Videos
    Traffic Engineering
    L-1 Derivation of Q = KV • #traffic, flow paramet...
    L-2 Macroscopic traffic flow modeling: • #trafficflowmodeling, ...
    L-3 LOS on Two-Lane Roads: • #trafficengineering, #...
    L-4 LOS on Multilane Highways: • #LOS, #trafficengineer...
    L-5 How to Reduce Conflict Points: • #traffic, How to reduc...
    L-6 Concept of Critical Gap : • #traffic, #gap, #headw...
    L-7 Critical Gap at Uncontrolled Intersections: • #capacity, #gap, Criti...
    L-8 Critical Gap at Roundabouts: • #capacity, #gap, Criti...
    L-9 Capacity of Roundabouts: • #traffic, #Capacity, C...
    Highway Engineering
    1. Proportioning of Aggregates : • #highways, Three Metho...
    2. Marshall Method of Mix Design : • #highways, Marshall Me...
    3. Vehicle Damage Factor: • #highways, Vehicle Dam...
    4. Design of Flexible Pavement: • #Highways, Design of F...
    5. Cumulative Fatigue analysis of CTB Layer: • #highway, cumulative f...
    6. Overtaking Sight Distance: • #highways, Overtaking ...
    7. Design of Overlay by FWD: • #pavementevaluation, #...
    8. Design of Mix for GSB Layer: • #highways, Laboratory ...
    Research Presentations
    1. Sustainability in Highway Construction: • #Highways, Sustainabil...
    2. Joy and Challenge of Being a Civil Engineer: • #Civilengineering Joy ...

КОМЕНТАРІ • 50

  • @poothibabu
    @poothibabu Рік тому

    Thank you sir.. I was searching for a class with English language .. Good ppt and Good Class sir🌹🌹🌹

    • @SatishIITR
      @SatishIITR  Рік тому +1

      Thanks, there are many more to watch.

  • @abdheshsinha2984
    @abdheshsinha2984 2 роки тому +2

    Thank you sir for this informative lacture. You have cleared the doubts of CBR sample preparation and grading of GSB.

    • @SatishIITR
      @SatishIITR  2 роки тому

      It's my pleasure

    • @SatishIITR
      @SatishIITR  Рік тому

      @@qualitycontrolengineer8348 No, I did not say these are not used in GSB mix. I said that for getting the gradation of GSB, in the given example case, aggregates of 20 mm and 6 mm are not needed. It all depends on the grading of aggregates of different sizes available at site. The final mix should conform to MoRTH grading. I hope it is clear.

  • @drpradeepkr
    @drpradeepkr 2 роки тому

    Just fully watched, one more very informative and useful video, thankyou sir.

    • @SatishIITR
      @SatishIITR  2 роки тому

      Thanks. Keep watching and share the link in your groups.

  • @prathibhaumapathi9771
    @prathibhaumapathi9771 2 роки тому

    I have no words to express my gratitude sir ! 🙏🙏🙏

    • @SatishIITR
      @SatishIITR  2 роки тому

      Thank you so much. I am happy to note that you liked it.

  • @dr.kayitharavinder6383
    @dr.kayitharavinder6383 2 роки тому

    Excellent lecture, very much useful for all the civil engineers, highway and transportation professional s.

  • @abdulsaboorsakhizada8974
    @abdulsaboorsakhizada8974 10 місяців тому

    Wonderful! Thanks!

    • @SatishIITR
      @SatishIITR  10 місяців тому

      Glad you liked it! Keep watching

  • @MukhlidMusa19
    @MukhlidMusa19 2 роки тому

    very good lecture..please keep posted us with good transportation lectures.

    • @SatishIITR
      @SatishIITR  2 роки тому

      Thank you Mohsin, I am trying to pick up typical topics only. You may also suggest if you want any special topic to be covered here.

  • @YogendraSingh-yt8lm
    @YogendraSingh-yt8lm 2 роки тому

    Very nice & explicit explanation.
    Pls. upload more videos related to highway construction.

    • @SatishIITR
      @SatishIITR  2 роки тому

      please visitmy channel and you will find many. Last Sunday (19 June) I uploaded the video on Warm Mix Asphalt.

  • @civillaboratorytest
    @civillaboratorytest 7 місяців тому

    Super information sir

    • @SatishIITR
      @SatishIITR  7 місяців тому +1

      Thanks and welcome. Keep watching

    • @civillaboratorytest
      @civillaboratorytest 7 місяців тому

      @@SatishIITR sir please make video for filter media mix design

  • @harshshah4033
    @harshshah4033 2 роки тому

    Thank you sir for this very helpful lecture. Plz make video on WMM mix design for flexible pavement.

    • @SatishIITR
      @SatishIITR  2 роки тому

      Ok, noted. There are many more videos on highway Engineering which are available on my channel. You may like to watch them also.

    • @harshshah4033
      @harshshah4033 2 роки тому

      @@SatishIITR Ohk sir.

  • @AlokSingh-fk2cf
    @AlokSingh-fk2cf 2 роки тому

    Sir very very helpful ....thanks

    • @SatishIITR
      @SatishIITR  2 роки тому

      Thanks. Please forward the link to your friends and colleagues also.

  • @swapnilpatil8644
    @swapnilpatil8644 2 роки тому

    Mack more videos like this sir thanks

    • @SatishIITR
      @SatishIITR  2 роки тому

      Sure, many more will come. please share the link in your group also.

    • @swapnilpatil8644
      @swapnilpatil8644 2 роки тому

      @@SatishIITR ok sir

  • @hozhetoshikhu250
    @hozhetoshikhu250 Рік тому

    👍

  • @milindjamble7987
    @milindjamble7987 2 роки тому

    The MoRTH recommended GSB grading are low on permeability. However IRC 58 provides guideline for US grading. This doesnt match with Morth grading. Also the design method for drainage layer given in IrC 58 is for rigid pavement and not flexible. Practically designer have no option to design GSB for flexible pavement other than accepting minimum thickness of 200mm as recommended. Since drainage layer is an important element is there a method for designing gsb for flexible pavement with appropriate permeability? Also especially when we are now constructing wider pavement for expressways.Kindly advice.

    • @SatishIITR
      @SatishIITR  2 роки тому

      when you lay GSB in two layers, the lower layer of 100 mm thickness acts as drainage layer. You can certainly use the philosophy of design given in IRC:58 to design this layer.

  • @abhijeetpangavhane6444
    @abhijeetpangavhane6444 2 роки тому

    Very Informative lec sir
    I have one question
    Why it is necessary to avoid broken back curve while designing horizontal alignment

    • @SatishIITR
      @SatishIITR  2 роки тому

      broken back curves are too closed spaced and therefore sight distance becomes a problem.

  • @PRADEEPKUMAR-ec5jq
    @PRADEEPKUMAR-ec5jq 2 роки тому

    Thank you sir for this valuable video. Sir how do we test unconfined compressive strength of GSB mixes?

    • @SatishIITR
      @SatishIITR  2 роки тому

      UCS can be determined as per ASTM D 1633. You need to apply vacuum to retain the shape of the sample.

  • @happening2023
    @happening2023 Рік тому

    Sir i have one doubt. As we conduct mdd/omc test we apply 55 blows for each layer. Therefore to get 98% of MDD how many blows per layer should we apply when casting CBR mould.

    • @SatishIITR
      @SatishIITR  Рік тому

      CBR mould is casted as per standard procedure at OMC.

  • @muhammadzaidhasan1426
    @muhammadzaidhasan1426 Рік тому

    Grading 3 and 4 are gap graded or open graded sir?

    • @SatishIITR
      @SatishIITR  Рік тому

      Gap graded. The necessaty condition for an open grading is stone on stone contact. Watch my video on Open Graded Friction Course and another one on SMA

    • @NMVedpathak
      @NMVedpathak Рік тому

      Respected Sir
      What will be the blending percentage of aggregates for grading 3 /4 . Please guide.

  • @Bisciv
    @Bisciv Рік тому

    Good afternoon sir
    Sir in mord specification for rural road grading of gsb is different from morth specification for road and bridge for grading I/II/lll
    1.Sir which gradation we need to follow for PMGSY works?
    2.why gradation for gsb is different in mord and morth?
    Regards

    • @SatishIITR
      @SatishIITR  Рік тому +1

      already replied to you on Linkedln

    • @Bisciv
      @Bisciv Рік тому

      @@SatishIITR yes sir thank you
      Regards

    • @prpt2407
      @prpt2407 Рік тому

      Kindly clarify here also..we also want to know..

  • @govindarajv5713
    @govindarajv5713 Рік тому

    sir, upper sub base layer is drainage layer? pls check

    • @SatishIITR
      @SatishIITR  Рік тому

      Thanks for poiting it out. Will check.

    • @govindarajv5713
      @govindarajv5713 Рік тому

      sir, awaiting for your response

    • @SatishIITR
      @SatishIITR  Рік тому

      @@govindarajv5713 Yes, you are correct. If GSB is laid in two layers of then the top layer will act as a drainage layer. It is mentioned in the video also. I checked.

    • @govindarajv5713
      @govindarajv5713 Рік тому +1

      thank you sir for prompt response