You could get both tiller throttles to work together with a small bike sprocket and chain. Just put it ideally on engine side of throttle. Might need a small trim to handle.
Dude, I love that outboard place on 50. It is like a museum inside of there with all of the restored outboards. I was hoping that the guys grandmother would be in the video. She is so knowledgeable and she does a lot of the restoration since her husband passed. I love that place!
I drive past it everyday on my way to work but have never stopped by. I saw your comment before I got to that part of the video but I instantly knew what you were talking about when you said "that outboard place on 50" lol. When I was a kid I'd always break my neck looking at all the cool boats when we drove by.
the guy with the outboard shop needs to start a channel , i would subscribe immidiately , as much as i love the rough n ready style of what you do , there's something theraputic about taking an old boat or outboard & making it look new again that i love
Bill Engvall, "Here's your sign"...Throw a couple of golf tees in your pocket... When you need an emergency rivit, slam one in with your "screwdriver, wrenchy thing". Love the channel!
I refurbished a 1970 aluminum jon boat 15 years ago,no leaks,a lot of work but i used a torch on every rivet and put a west system/epoxy on every one,then sprayed it with truckbed coating.
When I saw this I thought. What’s this wild man up to now? Didn’t disappoint!!! To get technical isn’t one prop turn one way and other turn opposite on duel outboards. Hey you’re right that outboard guy should start a UA-cam channel. I’d watch for sure👍
I had a friend who ran out of premix oil. He ran into the house and came back with a bottle. Wound up using his mom’s cooking oil for the YZ. I don’t think I was ever so ready to get back home that day. The oil he grabbed was the one that his mom used for FRYING CHICKEN!!! The smell of chicken frying from his bike was hilarious. Especially when everyone kept saying is everyone cooking chicken today at every stop. I was starving!!!
I stayed at The Ramada Inn at Kill Devil Hills in NC last weekend. The two couples who stayed beside me were from your area. They all knew who you were and liked your channel. I enjoyed their company and glad to have met them.
I always love a shop where you can borrow whatever parts you need because you know if they need it bad for something, they’ll just come take it back off your boat.
i can attest... if you get the moisture balance right, the underside of a bush out in the yard is a fantastic place to keep an engine. the moisture and dirt seems to keep the rubber from drying out as quickly. its the same reason i never drain fuel out of my engines. you'll never get all the fuel. The tiny amount that remains will harden up, clog everything and your rubber components will dry out and crack.
Luke, I think you could get a third 25 on the transom! But you may need a bit of reinforcing to keep the transom attached.. reminds me of the time we put an Evenrude 35 on a 14 ft Gregor boat that was rated for 15 hp!. Of course you’ll have to rig up some flexi cables so it works with one throttle. By the way the wire hose clamp works better if you put two loops around the hose. And better yet if you know someone who works stringing up telephone and cable tv cables. Their lashing wire is stainless! No rust!
Bro, I just spit redbulll all over the place at “mine shuts itself off”. Had motors like that before. Had a 9.9 with no neutral one time. Get your s**t ready and give her a rip 😂 You’re one of the funniest guys on UA-cam. Glad to see you having fun goofing off for a change!
They can take my reliable two strokes from my cold dead hands. Imagine buying a four stroke, twice the weight for half the power and twice the maintenence. My 40 year old Gamefisher meanwhile I just need to replace the plugs every once in a while and do the gear oil, with the right mix it will run forever. (Speaking of did you drain and replace the gear oil, it's nuts how many people forget)
@@DustinKeating-yk3vq seriously, I was looking earlier this year, even used ones are ridiculous. I don't get it, they're such simple motors just hooked up to a vertical drive shaft and they pull water cooling from the water they're in.
You know they literally spray oil into the environment? Have you ran one in a trash can? Would you drink that water? Water your garden with that water?
@@peirsd yup don't care. It runs great and I run it rich so it spits more oil, but will last longer. My little Gamefisher doesn't hurt anything compared to the entire continent of India, China, any city in the US like Detroit, etc.
I'm working on a 40 year old gamefisher 15 right now. It's been sitting for 25 years, and I tightened a few bolts and cleaned the spark plugs, and it fired right up
Might I suggest blind rivets. really had to punch compared to a regular pop rivet, but a 5.5mm drill, a bag of 5.2mm blindrivets and your favoured goop, +5 exp every rivet. works very well.
My 14 starcraft with one Johnson 25, my removable floors between rear and mid bench, and mid and front and deck in front with just me got 26mph. It's electric start so also a battery. When I first put it together bare boat just fuel tank and battery in back with me was scary, coming back into a head wind thought it would come over on me. Started adding weight forward with deck and then floors and has been a great rig. Like your attitude, keep the experiments coming, great entertainment!
Came here for this comment. That three way wont work one engine will starve the other till it can suck air right on through unless theres check valves on both lines
You probably need to increase the pitch on those props. If the engine can hit max RPM with just one engine, you're probably hitting the rev limiters when running 2. An increase of 2" in pitch would probably do it.
I keep a bar of surfboard wax in the Jon boat and chunk some on any leaking rivets. Works great for the day but will melt out in the sun if the boat is dry
Luke I’m definitely glad that you finally did a dual motor setup on a boat for sure!!! I have always wanted to do the same thing but I definitely have not been able to find a couple of the same boat motors to try it let alone even figure out the issue with my 35HP Johnson that I have on my 18’ flat bottom boat!!! Awesome video buddy for sure!!!
So I saw a cool video we’re a person cooked there crab in sprite….😮 an it got me to thanking maybe you could do a a video trying out different methods of cooking crab. Love the videos, keep it up man
Man ive always wanted to stop by that place on 50. Thats outboard engine heaven!!!!! Back 20yrs ago I would see a guy with a 16ft chawk with twin 25 Johnsons tillers.
Luke, this was a great video. Never a dull moment. i laughed through the whole think. thanks for thinking to do that project. it was a hoot. thanks for sharing. get the leak fixed.....lol
22:09 he needs to stuck a stiff hose into throttle handle and long enough to reach to bow when sitting there for better weight balance. Common sight at lake Saimaa.
I could be wrong but if you have twice the power and similar top speed I would think you can gain speed with more prop. It definitely has no problem getting on plane 😂
Use code LUKE50 to get 50% OFF your first Factor box plus 20% off your next month of orders at bit.ly/3VjvALY!
You could get both tiller throttles to work together with a small bike sprocket and chain. Just put it ideally on engine side of throttle. Might need a small trim to handle.
Or bicycle brake cables and screw or cam gear in line
@fvsoutherngirl please help that outboard motor shop start a YT channel 🙏
Dude, I love that outboard place on 50. It is like a museum inside of there with all of the restored outboards. I was hoping that the guys grandmother would be in the video. She is so knowledgeable and she does a lot of the restoration since her husband passed. I love that place!
I drive past it everyday on my way to work but have never stopped by. I saw your comment before I got to that part of the video but I instantly knew what you were talking about when you said "that outboard place on 50" lol. When I was a kid I'd always break my neck looking at all the cool boats when we drove by.
the guy with the outboard shop needs to start a channel , i would subscribe immidiately , as much as i love the rough n ready style of what you do , there's something theraputic about taking an old boat or outboard & making it look new again that i love
I would definitely watch that!! Imagine was kind of odd outboards they have there and the parts to fix em!
Bill Engvall, "Here's your sign"...Throw a couple of golf tees in your pocket... When you need an emergency rivit, slam one in with your "screwdriver, wrenchy thing". Love the channel!
I refurbished a 1970 aluminum jon boat 15 years ago,no leaks,a lot of work but i used a torch on every rivet and put a west system/epoxy on every one,then sprayed it with truckbed coating.
I would totally watch the guy restoring old and unique out boards. That yard was awesome
When I saw this I thought. What’s this wild man up to now? Didn’t disappoint!!! To get technical isn’t one prop turn one way and other turn opposite on duel outboards. Hey you’re right that outboard guy should start a UA-cam channel. I’d watch for sure👍
I had a friend who ran out of premix oil. He ran into the house and came back with a bottle. Wound up using his mom’s cooking oil for the YZ. I don’t think I was ever so ready to get back home that day. The oil he grabbed was the one that his mom used for FRYING CHICKEN!!! The smell of chicken frying from his bike was hilarious. Especially when everyone kept saying is everyone cooking chicken today at every stop. I was starving!!!
That would make me mad
I stayed at The Ramada Inn at Kill Devil Hills in NC last weekend. The two couples who stayed beside me were from your area. They all knew who you were and liked your channel. I enjoyed their company and glad to have met them.
I was across the street lol
I grew up in KDH. Graduated from Manteo High before there was a high school on the beach.
@@ashleighelizabeth5916I kind of grew up in KDHs. Went to Green Run in VaBch (85) and lived in Lago Mar/Sand Bridge just north of KDH.
I’ve never seen a better commercial for Yamaha outboards than Sailing Zingaro. He sunk his about 30 times and last I checked he was still using it.
I always love a shop where you can borrow whatever parts you need because you know if they need it bad for something, they’ll just come take it back off your boat.
i can attest... if you get the moisture balance right, the underside of a bush out in the yard is a fantastic place to keep an engine. the moisture and dirt seems to keep the rubber from drying out as quickly. its the same reason i never drain fuel out of my engines. you'll never get all the fuel. The tiny amount that remains will harden up, clog everything and your rubber components will dry out and crack.
Luke, I think you could get a third 25 on the transom! But you may need a bit of reinforcing to keep the transom attached.. reminds me of the time we put an Evenrude 35 on a 14 ft Gregor boat that was rated for 15 hp!.
Of course you’ll have to rig up some flexi cables so it works with one throttle.
By the way the wire hose clamp works better if you put two loops around the hose. And better yet if you know someone who works stringing up telephone and cable tv cables. Their lashing wire is stainless! No rust!
18 hp yanmar better diseel
Or 15 hp propane outbsrds
Bill Engvall says, "Here's your sign." C'mon! Get the right red neck comedian. 😂 🤣😂 You gotta love this channel! Way to go, Luke!
Bro, I just spit redbulll all over the place at “mine shuts itself off”. Had motors like that before.
Had a 9.9 with no neutral one time. Get your s**t ready and give her a rip 😂
You’re one of the funniest guys on UA-cam. Glad to see you having fun goofing off for a change!
You can in fact use SAE 30 non detergent motor oil in place of 2 stroke oil. It is what was used before 2 stroke oil was a thing.
“It is what it is, you already watched the video.” This is the level of honesty that keeps me watching, from the North of the other coast.
LMAO…. “Always wear your kill switch”. Yeah, don’t worry about the life jacket😂.
They can take my reliable two strokes from my cold dead hands. Imagine buying a four stroke, twice the weight for half the power and twice the maintenence. My 40 year old Gamefisher meanwhile I just need to replace the plugs every once in a while and do the gear oil, with the right mix it will run forever. (Speaking of did you drain and replace the gear oil, it's nuts how many people forget)
You forgot to mention the ridiculous prices of the 4 stroke
@@DustinKeating-yk3vq seriously, I was looking earlier this year, even used ones are ridiculous. I don't get it, they're such simple motors just hooked up to a vertical drive shaft and they pull water cooling from the water they're in.
You know they literally spray oil into the environment? Have you ran one in a trash can? Would you drink that water? Water your garden with that water?
@@peirsd yup don't care. It runs great and I run it rich so it spits more oil, but will last longer.
My little Gamefisher doesn't hurt anything compared to the entire continent of India, China, any city in the US like Detroit, etc.
I'm working on a 40 year old gamefisher 15 right now. It's been sitting for 25 years, and I tightened a few bolts and cleaned the spark plugs, and it fired right up
21:50
An actual hammer!
Subtitle to the episode. Luke takes inspiration from Tom Sawer to get other people to fix his boat. 🤣Love the episode keep up the good work.
What a long 2 weeks! Happy Friday!!!
2 weeks 😢
Your content is so real. It’s awesome to see you just having a good time with friends.
I can't wait to watch that outboard salvage gem on the tubes.
I am interested in boat motor restoration videos. And boat camping videos. Not enough full blown boat camping going on. Great videos!
Thanks for the smiles. Have fun. Stay safe.
Flip it over and cover the bottom with Flex-seal tape! Great episode. Nice break from the crabbing videos!
Might I suggest blind rivets. really had to punch compared to a regular pop rivet, but a 5.5mm drill, a bag of 5.2mm blindrivets and your favoured goop, +5 exp every rivet. works very well.
Hope your season was a big success. Best from a fellow Marylander
Your project always -hilariously-work😮❤
Hanging out with you would be a blast, nice rig dude
Wow, that salvage place is old o/b heaven 😍 😮
Lindsey is such a doll. You scored big time, dude.
She didn’t do too bad herself.
My 14 starcraft with one Johnson 25, my removable floors between rear and mid bench, and mid and front and deck in front with just me got 26mph. It's electric start so also a battery. When I first put it together bare boat just fuel tank and battery in back with me was scary, coming back into a head wind thought it would come over on me. Started adding weight forward with deck and then floors and has been a great rig. Like your attitude, keep the experiments coming, great entertainment!
Cabinn cruser
Chuefvo l d scholl yanmar28 hp diesel iutbsrd
That three-way in the fuel system is a recipe for a lean running engine
Came here for this comment. That three way wont work one engine will starve the other till it can suck air right on through unless theres check valves on both lines
@trihulladventures6567 I use a selector valve
@@FoilPowell a three way ball valve
This new part place is crabber heaven
Need a lil jb weld on a screw to patch that leak
You probably need to increase the pitch on those props. If the engine can hit max RPM with just one engine, you're probably hitting the rev limiters when running 2. An increase of 2" in pitch would probably do it.
I keep a bar of surfboard wax in the Jon boat and chunk some on any leaking rivets. Works great for the day but will melt out in the sun if the boat is dry
This brings back good memories of overpowering. A single Evinrude 70 will get that boat right where it needs to be. Just make sure the trim works.
Man I wish you would’ve gotten me blowing the air horn at you when you left the boat yard on 50 lol
Good to see you enjoying life,playing and having fun. To much work is hazards to your mental health,no pun intended.
Great video, bummer you never got to skin-it back with 1 person. PT2 ?!!
Luke I’m definitely glad that you finally did a dual motor setup on a boat for sure!!! I have always wanted to do the same thing but I definitely have not been able to find a couple of the same boat motors to try it let alone even figure out the issue with my 35HP Johnson that I have on my 18’ flat bottom boat!!! Awesome video buddy for sure!!!
Buy ektrc bayinger 185 32 kw Barre 135 hp 145l7 hp n e k rrrc
Now that was fun!
I thoroughly enjoyed the adventure in design and engineering.
I remember when they had an old Cessna fuselage out front for years at that boat yard on rt50. Enjoy life Luke.
Let’s go it’s back!!!!!!!!!!!!!!❤❤❤❤
So I saw a cool video we’re a person cooked there crab in sprite….😮 an it got me to thanking maybe you could do a a video trying out different methods of cooking crab. Love the videos, keep it up man
😂 flying with them twin 25s
That was..
Absolutely AWESOME
Though I have never seen a jon boat with a V bow
Until you feel it about to strip and back off about a quarter turn. Wow I love it.
I'm here for these kind of vids nothing better than experimentation, next you need to put a Mercury 450R outboard on a jon boat.
Oxe 450 doseel hybrude
Man ive always wanted to stop by that place on 50. Thats outboard engine heaven!!!!! Back 20yrs ago I would see a guy with a 16ft chawk with twin 25 Johnsons tillers.
Biuy a 16 f I tre canb crre 2 yanmares 50 hp smdissel outbsrd
Ever think Of Kevlar Fiber? Or the Hybrid Fiber? Awesome prices at US Composites and PreCut Strips so be easy to use.
You should christen it, “Rollin Thunder” and have a subscriber give away. Second prize- a factor dinner with Luke cooked on the exhaust manifold
Or maybe call it, “Smoke Show”
A video with that wet bike would be great
Luke, this was a great video. Never a dull moment. i laughed through the whole think. thanks for thinking to do that project. it was a hoot. thanks for sharing. get the leak fixed.....lol
Over the winter, you should patch the whole bottom of the boat or you go up and down the runners on the bottom was like some 5200
You need a Luke approved Jack plate to get more speed… a bottle Jack comes to mind 🤔
oh Luke you provide hours of enjoyment...... keep it coming its gonna be a long winter ahead..... PAm your best PEnnsylvania fan.....
14:14 he should start a YT channel
I would watch it
22:09 he needs to stuck a stiff hose into throttle handle and long enough to reach to bow when sitting there for better weight balance. Common sight at lake Saimaa.
I used a long hose on the gas tank and put the gas tank up front when I was by myself
@@roryhennessey1983 it works as long you have gas 😀
Wish we could stuff like this in the UK loveing the videos
Should watch a UA-cam video how to do wheel bearing love from Australia
What a great video Luke. Honest fun. I enjoyed it man.
Reminds me of Dons Marine Salvage in Clearwater Florida!! So fun to just look around!
Love the shenanigans Luke. We're not here for a long time so might as well have a good time. 😂😂😂
9:14 best line ever!
dang it although that was good, it was not the intended. 19:14 best line ever!
I did this a couple years ago with twin 15's on my flat bottom, it was awesome.
Was that an old 80's Wet Bike in the background at 3min
You all have way to much fun!!!
We used to run small boats with outboards. Mostly alone. So our dads would put two huge bags of sand up front so we would be ok :D
Mastrr chef big gas c tank small outlong and bgre small boat
Next episode...."Learning how to water ski" 😅😂😮😅
I feel like Luke drives to the yard to cook every meal on his crab boat engine no matter where he is
You have to put a sand bag in the bow to keep it from porpoising.
Get a quick release boat plug from inside n when on plane run without the plug the water will drain just put back in off plane
I had a 1986 16 foot Lund v hull predator with an Evinrude 50 Two stroke tiler. That thing would scoot around 55 mph with just one person in it.
Good fit it
Live in the dream luke , keep it up
Never lose your sence of adventure keep it coming
Next video 5! 25 hp engines across the back🙌✅👻😁🤔
LMAO
Man 2weeks and not even 40 minutes?? Come on Luke !!!
Love your videos! This one was crazy! Keep it up Luke!!
✌️🤟🤘🦀🦀🦀🦀🦀🦀🦀
You rock lil brother.. you know you can move south and fish all year right?? 🤪🤪🤪
I though there was no reason to have two except to make it wild and crazier! But you said it was for speed. Do I really believe that.
You built me a boat?? How thoughtful!!! When could I pick it up?
The leak is keeping the floor from getting too hot!
Looks like you had some fun with it anyway ❤❤❤
one tiller and one throttle and it would be mint
Another great Luke video!!!
Thanks for watching!
You need higher pitch props. Power doesn't matter if you ain't turning enough pitch.
These have to go on the 6ft dinghy next.
I want to see videos of the desperado project!
Finally someone did it
Lmao “The best part about having identical motors is you can rob parts off the other one to make it run” 😂😂😂
Luke...this is why I watch your video...its all about content...Here's...your sign...🦀
Twin motors are fun but you should try my twin motors into one prop race boat one time. Ferd can tell you all about it.
The spark check test methods love it .
Omc 56” 60hp-70hp are the BEST outboards ever created these are a close second though
Wri n g 60 70 hp mercuy hi n da yamha
I could be wrong but if you have twice the power and similar top speed I would think you can gain speed with more prop. It definitely has no problem getting on plane 😂