I have 50inch triples. When I first tried to run them on 2024, the left screen was distorted. The next when login access improved they all worked fine with frames around high 40s to 50s on Ultra. I run a 4090.
I am running 55in triples using a 4080. I too am having issues with my left screen, appears to be stretched. I have not been able to figure it out thus far. I am not happy with the triple screen support so far. Good to see some people are getting it working. Gives me some hope.
@@chook93 That is exactly what mine looked like, it just went away by itself on my next login when the application obviously loaded properly. Triple screens have worked fine since.
3080ti triple 27inch 1440p was working but since I update GPU I'm getting dxgi crashes as soon as I open settings or load in, can't even change it to single now without uninstalling the game. So annoying....
@@cristiancoco7935 I think career mode is worst for FPS. Free Flight always seems a bit better. 3x 4K on Ultra = low 30 fps. On high settings = high 30’s fps. I highly recommend using dev mode and turn on display fps to show where your PC. Is being limited. In some scenarios I max out my 32gb of ram. So might be a few upgrades coming.
As stated in the video, the RSG software is not yet ready and as stated in video did not get RSG to work (buttons INOP). RSG stated that once it is ready they will send e-mail to customers and there probably will be something on the web-site.
If u shutdown your pc, and restart, how do u open the windows 1,2,3 again, because mine not opening automatic. Do u have to do it from the start again.
Changing additional screens to windowed mode will often move them to the correct screen. However, sometimes you need to grab the windows from under another window.
Hello, thanks for the video, but I have not a Volair Sim. (Small side note: Let me say that the multiscreens in Xplane are much, much better than in msfs2020 and 2024 and I am frustrated with the result in msfs2024) I have a problem: I use 3 screens, middle and right one are acceptable, left screen is squashed flat..?..In msfs2020 this is not the case. Any idea how I can fix this?..thanks for a reply in advance...
Thanks for your video. I have a question. First I was running MSFS 2020 with five screens just fine. Thought I would be able to do the same with MSFS 2024. Setup was easy once I found multi window menu is now in Advance Option. Using the same setup as 2020; Full Screen but I can’t get any additional screens on or being able to pop out instrument panels using the right alt option. Any suggestions?
I have not experienced the issue you are describing. My G1000 displays however are NOT set-up in Advanced Options but rather set-up in widows as additional displays.
@@Globeguy1 Yes it is possible, you undock the PDF, slide it onto the desired display. Then you undock MFD, slide it to the same display. Note, you may obviously have to resize the windows to fit and leave them in windowed mode.
Yes, it is quite hard in MSFS2024 because during pause you do not see the cockpit view. What I have done is set-up my 3 displays in MSFS2020 and just copied the settings (offsets) to MSFS2024. Thank you for mentioning this, I completely forgot to mention this on video.
@@volairsim This problem should be reported to Microsoft. It's illogical that no one has done it and it's illogical that the developers have not noticed this
Do you know if the Home Cockpit Mode works it did not in 2020. It is located under General setting and Camera and then you will see home cockpit mode Thank you
I wish I could get my triple screens running smoothly. As soon as I turn on the side screens I have a ton of issues with visual quality, artifacts popping in and out, screens going black and etc. Running my main 4K monitor at max graphics I can consistently get 60-70fps but as soon as I turn on triple screen even on 1440p lower graphics it turns into a pile of manure.
@@volairsim im trying but im in trouble, how can i go to the advance menu from the cockpit, without change the view in external mode? in this way is not possible to aligne the edge of the pit.
@@cristiancoco7935 Yes, it is quite hard in MSFS2024 because during pause you do not see the cockpit view. What I have done is set-up my 3 displays in MSFS2020 and just copied the settings (offsets) to MSFS2024. I completely forgot to mention this on video and I should have as it is an important point. Otherwise, you will have to do trial and error. Start with the L display -90 and right +90 and go from there.
@@cristiancoco7935 nope absolutely the stupidest thing I've seen, how they overlooked this who knows, in saying that how the overlooked a lot of things is beyond me
I am obviously biased but I definitely prefer 3 displays vs. single ultra-wide because you will have much wider field of view and also you will get a feeling of sitting in a cockpit which you will not get with a single display.
you do not say anything about how to set multi windows
I have 7 monitors nothing is working in MSFS 2024
I have 50inch triples. When I first tried to run them on 2024, the left screen was distorted. The next when login access improved they all worked fine with frames around high 40s to 50s on Ultra. I run a 4090.
I am running 55in triples using a 4080. I too am having issues with my left screen, appears to be stretched. I have not been able to figure it out thus far. I am not happy with the triple screen support so far. Good to see some people are getting it working. Gives me some hope.
@@chook93 That is exactly what mine looked like, it just went away by itself on my next login when the application obviously loaded properly. Triple screens have worked fine since.
@@chook93 how manu fps do you have with this triple? I have three 32” with 4080 and after two days of work i cant go up 41!
3080ti triple 27inch 1440p was working but since I update GPU I'm getting dxgi crashes as soon as I open settings or load in, can't even change it to single now without uninstalling the game. So annoying....
@@cristiancoco7935 I think career mode is worst for FPS. Free Flight always seems a bit better. 3x 4K on Ultra = low 30 fps. On high settings = high 30’s fps.
I highly recommend using dev mode and turn on display fps to show where your PC. Is being limited. In some scenarios I max out my 32gb of ram. So might be a few upgrades coming.
In the last 5 years they still haven’t figured it out. Looks worse in 24. Setup is the opposite of intuitive. Huge waste of potential.
great setup. We share similar tastes ! New Sub
Thank you!
How did you get the realsimgear to work? There is no interface for 2024 yet
He told about it in video. Just watch :D
@@joelsavoie8319timestamp pls?
@@joelsavoie8319he just says it doesn’t work?
As stated in the video, the RSG software is not yet ready and as stated in video did not get RSG to work (buttons INOP). RSG stated that once it is ready they will send e-mail to customers and there probably will be something on the web-site.
Have a nice flight!
How did you get efb on a tablet
BTW, if your mouse does not take control after starting the sim, try moving or removing the additional window. That restores mouse control for me.
Is is still not possible to undock the outside view to your monitors? So the cockpit will now appear on the screens?
Any recommendations as to who can help set up and get all of the recommendations done
in San Diego area?
If u shutdown your pc, and restart, how do u open the windows 1,2,3 again, because mine not opening automatic. Do u have to do it from the start again.
Changing additional screens to windowed mode will often move them to the correct screen. However, sometimes you need to grab the windows from under another window.
When you start the game select a free flight. Otherwise you’ll likely experience distortion exactly like in 2020.
Hello, thanks for the video, but I have not a Volair Sim. (Small side note: Let me say that the multiscreens in Xplane are much, much better than in msfs2020 and 2024 and I am frustrated with the result in msfs2024) I have a problem: I use 3 screens, middle and right one are acceptable, left screen is squashed flat..?..In msfs2020 this is not the case. Any idea how I can fix this?..thanks for a reply in advance...
We're sorry but we have not seen this issue with the multiple displays set-up in MSFS2024.
Can you undock a screen for plane outside view light we did in prepar3d?
Thanks for your video. I have a question. First I was running MSFS 2020 with five screens just fine. Thought I would be able to do the same with MSFS 2024. Setup was easy once I found multi window menu is now in Advance Option. Using the same setup as 2020; Full Screen but I can’t get any additional screens on or being able to pop out instrument panels using the right alt option. Any suggestions?
I’m also running a 4090
I did not have to do anything, my pop-outs just worked on my second log-in...You could try re-installing it. 🤔.
I have not experienced the issue you are describing.
My G1000 displays however are NOT set-up in Advanced Options but rather set-up in widows as additional displays.
@@volairsim Can we set up all PFd, mfd, etc on a single window? I tried to do that but couldn't figure it out.
@@Globeguy1 Yes it is possible, you undock the PDF, slide it onto the desired display. Then you undock MFD, slide it to the same display. Note, you may obviously have to resize the windows to fit and leave them in windowed mode.
When the game starts, my additional window is always hidden behind my main screen. Do others have the same issue?
Most of the time yes.
Hi, I can't adjust the 2 side monitors because the background image moves during the settings and I can't find a way to stop it.
Yes, it is quite hard in MSFS2024 because during pause you do not see the cockpit view. What I have done is set-up my 3 displays in MSFS2020 and just copied the settings (offsets) to MSFS2024. Thank you for mentioning this, I completely forgot to mention this on video.
@@volairsim This problem should be reported to Microsoft. It's illogical that no one has done it and it's illogical that the developers have not noticed this
Do you know if the Home Cockpit Mode works it did not in 2020. It is located under General setting and Camera and then you will see home cockpit mode Thank you
It seems to work but I actually do not use it.
I wish I could get my triple screens running smoothly. As soon as I turn on the side screens I have a ton of issues with visual quality, artifacts popping in and out, screens going black and etc. Running my main 4K monitor at max graphics I can consistently get 60-70fps but as soon as I turn on triple screen even on 1440p lower graphics it turns into a pile of manure.
You are not alone. Seeing some evidence that some others are getting it to work gives some hope to keep tweaking and see if can get it working.
How i can setup triples?
Look in the advanced features in the setting menu in MSFS2024. There will be an option to add additional displays.
@@volairsim im trying but im in trouble, how can i go to the advance menu from the cockpit, without change the view in external mode? in this way is not possible to aligne the edge of the pit.
@@cristiancoco7935 Yes, it is quite hard in MSFS2024 because during pause you do not see the cockpit view. What I have done is set-up my 3 displays in MSFS2020 and just copied the settings (offsets) to MSFS2024. I completely forgot to mention this on video and I should have as it is an important point. Otherwise, you will have to do trial and error. Start with the L display -90 and right +90 and go from there.
@@volairsim is not possible to go in the camera menu remaining in cockpit view???
@@cristiancoco7935 nope absolutely the stupidest thing I've seen, how they overlooked this who knows, in saying that how the overlooked a lot of things is beyond me
better than ultrawide set up?
I am obviously biased but I definitely prefer 3 displays vs. single ultra-wide because you will have much wider field of view and also you will get a feeling of sitting in a cockpit which you will not get with a single display.
@ that is what i thought. I ordered a third screen. Also, other games on a 49” wide seems a neck pain and prefer to be able to just use a center panel