MICROSQUIRT INSTALL and TUNE on Super clean 93 Mustang foxbody GT!!!
Вставка
- Опубліковано 1 жов 2024
- Install and tune on this super clean foxbody mustang GT. Tuned with Tuner Studio
MODS:
331 Stroker, AFR Heads, TFS Camshaft, GT40 Tubular intake
DB9 to USB cable: www.amazon.com...
I am Florida, where can I buy that and Can you tune it remote ?
Yes, I can remote tune it. You will need a laptop and a timing gun. The rest I can do remotely.
You can purchase the micro from EFI Source website www.efisource.com/wp/shop/microsquirt-for-1986-93-ford-5-0-mustang/
I’m still fighting with the idle on mine and you made it look way to easy.
Thanks! I can help you with yours if you like. You can email me your tune file and I can even log in to your laptop remotely to get it straightened out.
@@1frankglz that would be greatly appreciated what’s the email address?
@@ralphpineo9584 frankglz@sbcglobal.net
Can you help me please?
Sure thing.. what exactly do you need help with?
Do you think. On my stock 5.0 what can i do to it with out messing with the computer maybe cam are going to 331 stroker kit
You can run A/C with the Microsquirt? I didn't think it supported that.
Did you had to adjust anything to compensate for the ac when it turns on. When I turn my ac on it surges
What rims are those and size ?
Thats a very clean fox nice
Good vid, I think I might look into the Micro. Sounds like maybe that ole GT-40 tubular intake whistle...mines doing the same thing and coupled with chasing a real vacuum leak was givin me a headache.
Oh yes it’s a good option. The whistle comes from the throttle body most of the time. Some like it while others don’t. I’m neutral on it.
What part of Texas are you in? I just moved to north Dallas would love to take cruise
I’m in the Houston area but am familiar with north Texas. I grew up there. Check out North Texas Foxbody club on Facebook. They have weekly meet ups.
Ive had a Micronsquirt for like 5 years. Finally got a 5.8 to use it with. Cant find the adapter. Have to buy a broken computer to take the 60 pin from
Call Mike at EFI Source. He should have one.
@@1frankglz thanks for the lead
Does this system still use MAF sensor with map
No, it does not. It runs of speed density and uses the MAP sensor to know engine loads.
Gotta compliment the foxbody, I gotta read up n see tire/wheel combo and lowering kit.....
Just the way I like to see them..
Those are SVE wheels. I think it has Steeda lowering springs.
I will pay for your plane ticket and your services if you install mine?
Where are you located? Also, which ECU do you have?
I know megasquirt is kindan expensive but is it really worth it. Cause my dad recently got me a 93' mustang gt and i wanna let some shop tune it but they told me they tune it only by megasquirt.
I have a Stinger Pimp XS never used still in box For Sale
Stinger PimpXS is my favorite of the megasquirt brands. What do you want for it?
@@1frankglz Just looking what I paid for it. $950. I'll pay the shipping
@@ford9050 Thanks. Will let you know.
Damn you made that look so easy! Awesome stuff brother!!! 💪🏼💪🏼💪🏼 do you do remote tuning?
Hello JD. thanks and yes I do remote tuning. Send me an email at frankglz@sbcglobal.net
@@1frankglzi know of been a year since this video but are you still doing remote tuning?i recently a hci and need to do one
Cool you're in houston also. Just got efi source to build me a standalone harness for the microsquirt to eliminate any issues while I'm doing my swap
Yes sir. I'm here in the NW area. Mike from EFI will do good for you on that harness.
@@1frankglz yes Mike is awesome can't wait to put the harness in and take it to the track
Are you able to help with megasquirt tuning? I can’t even get my foxbody to start anymore once I changed the KPA settings.
When I bought my 90GT it had that same A3M ecu which I read was only suppose to come in the 93 models. My car had no bolt ons or engine mods and when I took the ECU out it look like it was never touched, odd.
Why didn't you use the ms3pro plug and play ?
Are you referring to the MSPNP2? That one is plug and play. I am not familiar with a ms3pro that is P&P. Send a link
What do you gain from adding this? Please be specific. Newbie here
The microsquirt was added to tune the car. Everything else was kept on the car.
@@1frankglz So what do u gain from this modification. Please explain.
@@Arcturian1111 To tune the car and optimize the modifications done to the car. The stock ecu would also need to be tuned but he chose a standalone ecu.
what is the model number of the microsquirt?
www.efisource.com/wp/shop/microsquirt-for-1986-93-ford-5-0-mustang/
I don't own a 5.0, but seeing this make me want one
I hear you bud. It's a nice foxbody. I just sold my fox and plan to get another one.
This is a nice fox. What was the software you were using?
What are your numbers on the “fuelVE table 1”
Would this work on a stock 87 lx notch with no MAF?
Yes, that is correct. This ecu can be tuned without a MAF. That seems to be the prefered method.
@@1frankglz do you know what model is best?
Doesn't sound like your 1st rodeo
I’ve done several of these installs. Also the other megasquirt brands. 👍. Thanks bud
How much to do my turbo foxbody?
I can do it. Are you in the Houston area or want me to do it remotely?
Nice. You are in Houston? Do you know of a good paint shop?
Yes sir, I am in Houston. No shops that I've dealt with personally.
@@1frankglz Dang. I'm going to get this engine computer, If I need help I'll let you know.
Sounds great. Thanks!
Car sounds good! Great job!
Thanks bud 👍👍
Good work!…😬👍🏽
Thank you bud 👍
Beautiful stang
Thank you
Jesus bro! What exhaust is that? And outstanding video by the way. Count me as another subscriber!
Thanks bud! It is flow masters with an H-pipe and BBK shorty headers. I appreciate the subscribe.
Both my dream cars, love them!
Thank you! Only the Shelby is mine. The other I tuned for a customer but I’m trying to buy it from him. Haha. It’s so clean.
Totally serious
#BossTunes
Thanks buddy 👌👌
Man u a def pro.. what would be the pricing on a job like this?
Thanks buddy. Shoot me an email with the details of your build. frankglz@sbcglobal.net
Nice 👍
Thanks ✌
Hell yeah
Thanks bud
Awesome video!
Thank you!
Great video!
Thank you bud 👍
Awesome stuff brother!!! 💪🏼
Thank you 🙌
@@1frankglz do you do tunes through email? I had the Mirco on my Fox and had it running well but was just never happy with the idle. I ended up going back with the stock ECU and Pro-M mass air for 30lb injectors and it runs good. It would be nice to go back to Mirco one day tho since I have it. My set up is 87 302 stock short block, E303 cam, 180cc Promaxx heads, ported GT40 intake and 30lb injectors.
@@jdrods1519 Yes sir I do remote tuning and can do it for you. my email is frankglz@sbcglobal.net
Wow Frank, sweet cars man! I want tk add a shelby to park next to my Boss one day, and I hope my Fox is on yours level eventually 🤜🤛
Thanks bud! The GT500 is mine but the Fox I was tuning it for the customer. It was so clean that I decided to make a video of the install and some of the tuning.
@@1frankglz I missed that, was watching quietly during my lunch break, so I couldn't hear everything
@@BrailsfordsRides understandable. Thanks for watching 👍👍
Car looks clean, sounds great
Thanks bud!
Oh and by the way, that plug and play harness, since mine is a little Ford Ranger, do they make that same plug-in for my ECU? I can't find any information. Thanks in advance for your time and a great video
What year is it? I got this one from Mike at EFI SOURCE. He might be able to put something together for you.
@@1frankglz 94 Ranger 2.3. I am having crank but no start issues that just came out of nowhere, so I am getting rid of the OEM ECM. I noticed the plug looks exactly the same, though I may have more or less pins at 60.