How to replace valve cover on 2014 Chevy Sonic.
Вставка
- Опубліковано 7 вер 2024
- This video is about how to replace the valve cover on a 2014 Chevy Sonic.
Required tools:
8mm socket, ratchet, T40 torx bit, small flat head screw driver.
Valve cover part number: 264-920
We just used this video and it was spot on! It only took us about 20 mins to change it out! Thank you so much!
Thank you for actually putting the required tools in the descrp, and at the beginning. Can't tell you how many times I have to watch the videos just to learn what specific sockets/torque bits i'll need
Pepboys was gonna charge me $145 for this not including the part. So thanks for the help!
You got off lucky! They were gonna charge me $1500
@@kippkippington to replace a gasket only?
Thanks! Simple and to the point!
ive got the 1.4l but its exactly like this! Just as easy as it looks, Thanks man
Took me maybe a hour or two. All the stupid wires in the way The wires weren't loose like yours they were pretty tight and I couldn't get some of the clips loose. I just had to work around them and slide it in and out. Mine wasn't sucking air, but was idling rough with no codes. I took a gamble on this being the problem and turns out it was. It's running snooth now. I don't have any tips other than make sure you don't miss removing any screws there is one under the coil wire connector and I had to gently break the seal on the cover with a small screwdriver to get it off. When you put it back in don't trap the hose on the back under the nipple. You can still get it loose, but it's a pain.
So was the gasket seal already on the new cover?
Local place wanted almost 900 for this.
Omg!!! A shop was going to charged me $292 for parts and labor🤦♂️
Best video! Thx
Thanks 🙏😊
I see none of you guys put thread sealant on that one bolt
I’m literally here looking for answers what type of thread sealant and does it actually need it
Is this a 1.4 L or 1.4L turbo ?
Mines the turbo and it’s same same