Chevy Cruze Valve Cover Gasket Replacement - Leaking Oil - Same for Trax, Encore, Sonic 1.4 L
Вставка
- Опубліковано 10 вер 2024
- If this video was helpful, consider donating :)
Paypal - paypal.me/chad...
Cash App - cash.app/$chad...
Venmo - www.venmo.com/...
Link to product in this video:
Felpro VS 50807 R - amzn.to/2JBpUtR
In this video, I replace the valve cover gasket on my Chevy Cruze. This one was leaking oil down on my exhaust manifold because it was old and brittle.
REMEMBER. You want to remove all gasket material with scotch bright pad BEFORE putting the valve cover back on. AND torque all the bolts down to a specific spec. Not just "tight" this will ensure a proper seal and no leaks
No silicone required?
@@trentdaddydolla647 yeah you have to squirt a little bead of gasket maker in a couple spots
How do you know what spec to torque your bolts to?
If you are going to do this I strongly suggest going to a Chevy dealer and buying a new cover for $85 which comes with a gasket instead of replacing only the gasket. This is because the PCV is molded into the cover and will go bad. Also, apply a small amount of gasket sealant at the 2 seams of the block on the left end, front and back, as the Chevy repair bulletin suggests.
Agree with sealant, its not the PVC in the valve cover ,PVC is in the intake it fails and requires new intake or mod. A failed PVC in intake causes pressrize air from turbo into valve cover ripping diaphram.Diaphram opens to pass blow by gases to PVC .
Brah got me out here being a whole mechanic and I’m for it ❤. Thank you so much for these videos.
I have a 2012 cruze and it is a constant money pit. There is always something going wrong. I have had to replace the Valve Cover twice. The valve cover cover gasket. The water outlet twice. The Turbo oil feed line. The coil pack along with other things. The trunk release button on the car works off and on, most of the time I have to use the remote to open the trunk. The remote start works off and on. All are easy fixes but WOW !!!!!!! does it ever end. Your videos are great by the way.
I've got a 2011 and every since I've gotten it it's been nothing but work! Most things I can fix myself, but like you I'm wondering when it will end!!!! I've also replaced my valve cover twice and now I've got to fix the window motor. Never ending issues, this car is trash!
What's the remote start fix, my 2014 Cruz is doing that right now
Brian Wideman Same with my 2014. Let me know if you figured it out pls
@@elb7432 Plus you will have a nice working car with all new parts lol
I have a 12 Cruze and I cannot find the trunk release , where might that be ? Also I have the same problems as you it’s just a big pos I hate the dang thing
You don't use an impact driver on the valve cover bolts. You will destroy them. The correct torque specification is 71 inch pounds.
What should I use instead? Will the ratchet work for that? I’m very new to working on my Cruze.
@@aeroracer4875best to use a torque wrench that’s in 71 inch pounds. Cheap ones go for $30 while more expensive torque wrench’s go for $150-$200. Always stop when you start to feel pressure and resistance reason being is you can snap that bolt in half causing more hours of a headache. Hope this helped!
Very helpful. The dealership wanted $479.00 to replace...Cost me only the price of the gasket and 45 minutes of my time.
That is awesome! So glad I could help and save you money! Thanks for watching!
Does the gasket go on dry?
My 2012 is on its 3rd oil leak, I’ve had the leak for like 6 months now bc I can’t afford to pay mechanics to do this ($900CAD) it’s so silly how easy these things are but mechanics charge so much. I could literally do this myself with absolutely no experience, thank you
I’m having mine repaired for the fourth time. It’s so annoying to deal with.
My 2014 has been having this issue lately also. Mechanic found it back in April, replaced the gasket, it leaked again within a month, took it back they replaced it again under warranty for free. Now it's at it again and I'm pretty sure the warranty has run out. You mentioned your 2012 did it for months? Worth replacing it again? I'm looking to sell soon (by the fall hopefully) and just get a new car
just successfully watched this and did the repair in a short time less than an hour and i wasn't trying to do it fast. Thanks man!
Sweet. Had a rough idea on what I was doing anyway, But due to never working on this engine I'd thought I'd sus it out. Great video, Easy install too. Thanks for the info.
seeing oil on my wife's car as i see on yours. thanks much, now i can replace with some ease.
Zp
Would have liked to have seen how you cleaned the oil off the cover and motor using Brake Cleaner.
Used this video and the recommended valve cover gasket for replacement 5 Stars!!! ⭐️ ⭐️ ⭐️ ⭐️ ⭐️
How long did the repair take you? I am thinking of doing this to my wife's Cruze.
David Iveson about one hour. Make sure to buy both the cover and gasket (I did not do this and I am redoing the process soon). There is a valve under the oil cap that is probably nasty and will fall off.
@@thelightcycle ok thanks!
Chad you're lifesaver for many it seems. I have the 2015 1.4 cruze
I had my oil changed last Summer and the dealership decided to "diagnose" a small leak. (Also ripped me off for some filters, but that's another story) They came back with oil cooler leak and camshaft actuator seals. The estimate fir labor alone 🤦♀️. Then they had all these "extra" parts they claimed they would have to replace instead of reusing. The mark up on parts too 🤯.
I can do the actuator seals myself, I just haven't gotten to them yet. I have a feeling that the other leak is just what you replaced in the video. I can fix that!
My engine light came on a couple weeks ago, I tested it and got the codes. It was running lean. So I replaced the spark plugs, then had to replace the coolant overflow hose since the old one decided to snap. I must have knocked it. Thank goodness they revamped the model I bought. Then I changed the purge valve. All by myself for less then $200 in parts. #chickswhofix🛠🧰
I got another oil change at a different dealership. All they said was like had a oil leak. 🙄duh.
Fantastic video. I gave it a thumbs up. The only thing is if someone has not mentioned it it the tightening of the valve cover bolts. The torque specs needs to be carefully considered due to stripping the head. Torque specs are 71 INCH lbs not 71 ftlbs. Just a friendly FYI. Thx again awesome video
Didn't want to gravedig this comment but I feel like the plastic cover would break before you hit 71ftlb lol
I've seen a ton of raging comments online from idiots who tried 71ftlbs instead of inlbs lol. They were not paying attention to the instructions. The bolts of course all stripped out. I was amazed at how many people didn't figure out their mistake after stripping the first one.
I have the same car and i am running into the exact same issues. Thanks for the videos! You have saved me a lot of money.
This literally saved me $500, thank you so much man 🙏🏾
Lol. Went to Monro Muffler and Brake for a state inspection. My seal is leaking. They quoted me 459 bucks for labor. Thanks to you, I can SHOW them that it's a 15 minute job. I already knew it wasn't a huge job but since I'm a girl, they think I don't know anything about cars and that I'm a moron who can be snowed.
I noticed my cams were all oily and gross so I sprayed them down with the hose and now they’re nice and clean 😊
I followed step by step and replaced my valve cover gasket by myself so I didn't have to pay no damn mechanics..😊
About to do the samething today.
Because Fuck the mechanic they rip you off like the government do.
Wow thank you. We will be trying this over the weeked. I was told it would be 300$ by a local mechanic. I have some mechanic background and thing this looks like something I can accomplish. Thank you for the video
Don’t forget to put a dab of grey or black rtv where the timing cover meets the head
where exactly will you put it?
From Michigan as well. Definitely have to this on my car soon. Thanks for the video.
Thank you for the help! I spent about $30 for the part compared to the $400 the shop wanted to charge me when I got my tires changed.
Glad it helped! Save that money! :) Thanks for watching
Hello guys, thanks so much for these guided videos.
It helped out a lot, I've got my car fixed and it's running well now. Thanks for the instructions - keep it up
I just came across your video and the entire video was great! I will be following your video step by step to change the gasket on my cruze. Thank you! 🙂
You are so welcome! Glad to help! :)
Just had an oil leak on my 2011Chevy Cruze with 71000 miles in the same place repaired by the dealer. They replaced the valve cover. It took 3 tries to stop the leak. It looked to me like there was pressure rather than crank case vacuum because the oil was also seeping out the oil fill hole. I have seen on UA-cam that there are two PCV valves on the Cruze that could have caused the problem but was assured by the service technician that the problem was only on the valve cover.
Mine is leaking oil as well and just hit 130k miles. I have a feeling this is the problem as well. Thank you for the very informative video!
Same car, same issue, doing mine this weekend.
How did it go? I hope you got it all fixed!
you done??
Great Informative video , these cars look nice but mechanically are often troublesome. I have to rethread for bolts now I know how to remove when I do
Great video, I feel like I could do this myself. My Cruze has this leaking valve cover and I will post another comment once I have the full valve cover and replace it.
wow, great job now I, can't service chevy cruze my self.
Replaced it today on my cruze 2016. This video helped alot 👍🏻
It's recommended to just replace the valve cover with a new updated OEM one. You can actually get it from the dealer for around $100 with the gasket as there is supposedly a flaw in the diaphragm. The leaky gasket was throwing codes P0171 and P0420.
Dealer commison guy spotted
Buy from Amazon felpro only 12$
Full warranty or even oreilly auto zone
Never never never buy from dealee
Simple and effective instructions. Thanks for the assist.
I really like how you do your videos they’re very informational and there’s not a lot of bullshit
so simple to do even women can do it as long you have the tools whilst watching ...amazing
There are 2 points where you need to put a high temp silicone. On the top left and the bottom left.
Finally figured it out after your video. Thanks a ton!
So glad to help! Thanks for watching!
Nice work.. i just changed my coil pack on my 2013 cruz.. i noticed a small amount of oil in the spark plug chamber, so im gonna be changing my valve cover gasket really soon.. thanx for the video..
And i subscribed too 😊
@Denim Martinez yes it was very easy.. just follow along on the video and you'll do it.. easy
Just got done doing this to mine thanks for the help with your video. I got my seal from rock auto it came with the o rings.
This is also a fix for if your spark plug wells are pooling up with oil
I appreciate you brother!..just fixed mine just now 🍺🍺
Thank you for this video hopefully it is the problem. I have oil residue on the side your showing. I'll up date this comment once I change it.
Such a great video to follow. Well spoken. Thank you!!!!
Thanks dear! I learn a lot which I had an issue with valve cover
I think most valve cover leaks are due to a blocked PCV. I'm curious if you had another leak. Typically you'd need to replace the whole valve cover which includes a new PCV.
intake manifold
Nice video. Simple and to the point!!!
Looks so easy to do. Thank you
You also need the o rings for the bolts. Put black rtv gasket maker around the metal like washer sleeve inside the cover where the bolts go through and put the o ring on the rtv so it doesnt fall off and then put some rtv on the engine where it divides the timing chain cover and engine to seal it off and then reinstall the cover.
What is RTV?
you are the first one that talks about the o rings i cant seem to find exaxtly where they go .. can u help?
Thanks man. Great instructions. Doing mine now. 👍👍👍👍
Be cateful, sometimes those valve cover bolts are stubborn. And when you put it back together they tend to chase threads..you may end up having to helicoil them
what exactly do you mean by this? i just replaced mine and had issues with a few of the screws?
Great video! Very helpful. Thanks for posting.
Thank you
Very good video, you helped me save some money. Thanks!
Nice video Thanks have to do this to a Trax
You actually published the video on my birthday. Lol.
Happy birthday from another Dec 4th baby!!
Thanks Chad great video! Very thorough..
Thank you! Saved us so much money.
Dont forget tu out some gasket maker on top part of the head there's two cracks
Yes!!! Always put some gasket maker where the timing cover meets the head! Good call out
Always put some rtv on the left side where the black lines are. 71 inch pounds torque for the bolts.
Hey Chad! Great video you do a great job in showing how easy it is to replace a valve cover gasket. I found a leak and after watching this video I'm fairly certain it's the gasket and this looks as easy to replace than rotating tires.
It looks easy, but I will leave taking the engine apart to the pros. I enjoy these videos.
Very helpful video,thanks
If you are reading this, sell your Cruze once you get it fixed. Once I replace my valve cover it's going up for sale! Straight money pit!
😂🤣 man people love these cars. I'm a car dealer and buy these all the time so Ive seen a shit ton of problems with these lmao
@@trentdaddydolla647 fixed it, guy agreed to buy it. Overheated driving it 20 mins to his shop 😂🤦🏻♂️. Just happy to have it gone! I do believe every car is different though.
@@NiNjaXrEhaB yes the crises can be problematic, but you did the right thing. I would've done the same.
They are I have a 2012 and its given nothing but HELL!! I get panic and anxiety attacks every time I drive it! So yea I agree!
All cars are money pits.
Thanks for sharing
Super helpful, thank you my good man
You’re welcome! Thanks for watching!
You’re a savior, thanks a lot!
Life saver bud!!!
No pcv or PVC?? I would also recommend to clean about an inch below the value cover engine side. I recommend this just to verify that there is no more leaks afterwards, because you will still get burnt oil smell from the residual oil on the engine or mixed with dirt falliing on the exhaust manufold; thus getting the lady of the house all riled up that you didn’t fix the problem... or so is my opinion. Just a suggestion. Further, unless the shop manual or what ever guide is being used I would still use some silicone to hold the gasket and put on the engine side. That is to be absolutly sure there are no more leaks, and sometimes there is a weak spot that might need some help. (more internet search to find the weak spot)
I replaced this as I had the code pop up I ordered off amazon and replaced and found out my whole bottom of car was cover in oil on the left side . Replaced the gasket again Sunday and now I’m still leaking oil but this looks like it’s next to bolt holes not everyone but some and I can’t figure out why? The gasket came with o rings but couldn’t figure out how to put those on ? No video shows them . What would the cause be the gasket don’t look like it’s leaking . I’m aggravated .
Thank you for your video. Great help
Glad it was helpful! Thanks for watching!
I replaced my valve cover gasket and did everything the same as you did. However there was oil in my spark plug wells so I cleaned it all out and got new spark plugs. Now my car will start then almost immediately stall out every time like it’s hydro locked. What do I do???
Appreciate the video. Having the same problem on my cruze.. whatwas the torque on those screws for the crankcase cover back on
thanks for sharing video
You're welcome!
I'm not sure if this will solve my problem, but I am going to try because there is evidence of oil leaking around the valve cover. I also have a P1101 error code, and when my engine cuts on my car says service power steering for a second before disappearing on its own. Also engine struggles a bit to cut on. Any idea whats going on here?
we replace our valve cover and the coil inside as it had a broken tube. and replaced spark plugs works perfectly. check engine light off. only issue is a tiny oil leak on one corner of the valve cover. i know i got the gasket on right and did the right torque sequence. any suggestions?? could it be leaking from one of the bolt holes?? its hard to tell.
Hello I just had my valve cover gasket r replaced a couple months ago but now its leaking again and oil is everywhere. Seems to be coming from the same spot as you just have shown. If it's not the new gasket, what could it possibly be. I'm just learning and not sure what to look for.
So I’ve actually had this problem just yesterday I went for a oil change in the shop about 2 weeks ago and as of yesterday I had nothing in the engine for oil complete dry. There’s no leaks what so I ever was wondering if I change this gasket will that stop from the engine burning so much oil? Or would this be another issue.
I DO NOT recommend replacing your valve cover gasket UNLESS you just bought a NEW valve cover and damaged the old or had to take it off recently because the valve cover itself has a built in pcv valve which needs to be replaced often when you hear a hissing sound caused by a failed pcv valve. When you buy a new valve cover it comes with a new gasket and screws already attached and a pcv valve. If you just replace only the gasket it will be just a matter of time before you have to take it all apart again when it fails and start over with a new one. If you do this yourself be very carefully not to over tighten your bolts because you will strip them out and cause further damage to the engine and it will start leaking and oil will be all over the back of your car when you start driving. Then you will have to start all over again with a new one and tap your screw hole that you over tightened. My car is a Chevy Trax with 190,000 miles on it and I've replaced mine about twice a year.
I changed the valve cover gasket and smoke came out the bottom
What do I do
I have the same problem with my cruze, it smells burnt oil so I have to replace the valve cover gasket. But I also just did the pcv3 fix on it.
Lots of help!
Did you replace it yourself?
Did this take care of the oil leaking problem?Im currently having the same problem on my 14 LT cruze and the shop where I do my oil changes said around $1000 to do basically what you did 😂
i replaced my gasket but it still leaked and code P0171 came up. does it matter if i oiled up the gasket before putting the cover back on? i didn't see you oil your gasket.
Apparently they redesigned the valve cover to deal with a PCV issue and oil leaks.
Thanks great video
Great video bud, appreciate it.
Oh wow! I love it!
When you pulled off the cover,you should have replaced the whole thing and saved your self some time for when the poorly designed pcv valve goes out.
Isn't the PCV valve in the intake manifold? (If you have the 1.4 there is technically a second PCV right before turbo) I think you mean pressure control diaphragm... 😉 Good call on whole cover replacement though.
What does it mean if it is still leaking after gasket replacement and after that was vale cover was replaced
I replaced mine but it’s leaking out the bolt holes? Where do the o rings go on and how?
looks like lot of oil leaking around the value cover mine is leaking very little oil when I turn on the heat I have burnt oil smell coming out of the vents but it does go away after awhile
Thank you Sir... 💪🏼🙏🏽
I replaced the cover but on one side the bold leaks and it continues to leak when I drive manually or automatically
One thing I noticed no torque specs for the bolts I think it is 71ftpounds and the sequence in the steps to start from. great video for sure. Changing out mine today same place it is leaking as yours.
Did you find out the torque specs? 71ftlbs?
79 inch lbs
what about the o-rings that come with the felpro? i guess they go on the fasteners but where exactly?
great video man thank you so much, just subscribed! keep up the good work Chad
Thank you! I am glad I could help!
@@ChadWilliamsFixesAll how long did this take you? Also, my sister in law's Cruze is leaking oil from the VVT solenoids. I think they might need replacement. Just replacing the VVT gaskets might not be enough. I figured I might as well do the valve cover gasket too and want to know how much time I will need.
This job took about 1.5 hours to do
Before taking the plastic cover off you need to drain the engine oil or nah? Srry if it seems like a dumb question. Still a noob when it comes to learning about cars. I just wanna make sure I take care of my vehicle well. :)
Did you use any gasket sealant or something similar? Also can you drive it right after you change the part or do you have to wait ?
Hey bud. Quick question. I had oil what looks like coming out of the spark plug boots at the bottom. Is that just the valve cover gasket or is that a head gasket too?
When the gasket was put did you use any type of glue? I didn't see any but just verifying