Thanks mate for more footage of the Porsche !! This is a beauty 🙂 I'm just too sad that my family sold the old Porsche Allgaier of my grandfather years ago. I think it was an A111. There's been a Sekhmet on my Dream-Tac (I use it as a regulator gauge) for a few weeks and I like it. You just cannot have a repeatable tune on a rifle if you don't have a precision gauge that doesn't drift. And this one seems to be consistent!! Happy shooting
I appreciate you sharing your goodies at the end! Consider a video or two on the 360! Maybe a walk around for one and a ride along for another. I know I would watch. I'm willing to bet many others would as well!
Great video, again. If I get my FAC I will buy the gauge. I was also really curious about the chrono support, especially as the harmonic tuner doesn't work when you start attaching things to your barrel... And then you explained how you'd made it.This is now on my to do list! I too had noticed the Porsche logo on your floor before, my attention drawn to it because I too used to have a 997, 16 years ago. The fact you now have a Porsche tractor made me laugh out loud. Brilliant! So entertaining. Thanks for all your effort and for sharing.
Thanks for your comment Nicholas 🙂 Im happy that you found inspiration in the mount for the chrono. You will really like it. Its funny with the tractor since I wasnt really a Porsche guy in the past, but after getting my Cayman I started looking at all kinds of videos, and one with a Porsche tractor came up and I think I was laughing as hard as you did when I saw it - and one thing let to another and here it is 😃 You can check out the commercial here on UA-cam. Search for Porsche commercial - it is so funny 😃
Installed this angled mount today on my m3. I instantly regretted it when i pulled the charging lever. Now my indexfinger gets stuck in between the gauge and the charginghandle. Going to mount to smallest possible gauge and hope that mitigates the new problem.
No doubt that it is in the way, but you will get used to it and find a way to pull the leaver. I found it just as anoying like you do, but now I dont notice it at all 🙂
@@VikingAirgunner I guess its like new shoes? Gotta wear them in first :) The upside to seeing my reg pressure is well worth it. I fired about 200 shots yesterday after posting. Cant say im a fan of the new charging grip yet. Im contemplating an angled/curved handle that might pass over with more clearance. Back to the pc for some modeling work:)
Great stuff mate.....was only watching Airbuks video on the gauge mount last week.....think you have convinced me to get one.....does it get in the way of the cocking lever ?
It is absolutely fantstic. Im using it every time I fire a shot. And having it makes you more aware on when to fire according to the speed of the fill of the plenum. It IS in the way when you cock the gun. Had me worried in the beginning, but now I dont think about it anymore after getting used to a different way to pull the lever. Highly recommendable 🙂
Nice setup you have for the chronograf i bought the fx mount whit the carbon pipe that sits on the side, but I dont know if I am doing something wrong because it isn't as consisdent sometimes it miss the reading of maybee 4 shoots, could be because it is sitting on the side instead of under the muzzel
Saddly I think that it is pretty common with the chronograph to miss readings. The things that I check when mine is playing tricks is to check the batteries first. Then the position - not to close or to far from the muzzle. I thought about the fx mount, but for balance I thought it would be more precise under the barrel - I might be wrong. After making this video I got a cf pipe from China instead of the one in metal in this video. Looks super cool and a cheap solution. I will make sure to show it in one of my next videos 🙂
Here is what I did on my FX Dream-Tac: Saber Tactical bottle clamp + 2 scope rings + 50cm carbon fiber tube OD=1''. The FX chrony is JUST where it would be if it was hanging underneath the exit of my Koï. It never misses a shot. Be sure you don't have any obstacle just near the front side of the chrony as that really creates reading problems (I experienced this issue)
I appreciate that you leave the magazine in the gun while you do this... To many safety cautious youtubers are doing stuff like confirming the gun is unloaded by removing the magazine and shooting the gun in a safe direction before performing work, but not you my friend! Next video you should demonstrate how to do everything while the barrel is pointed at the family pet :-D (I'm just trolling you, not a bad video otherwise though ;-) )
Hi, do you know the size of xring under the manometer? I have leak from the manometer, after careful inspection i noticed that the x ring inder the manometer is broken...
Hi, I am thinking of installing angled angled gauge as well. But do I understand it right, that if you install it angled, meaning its a reg gauge, it would not show the remaining shot count? If it is installed as a reg gauge does it give you more info than just a reg pressure?
I must admit that I havent done too much research about the functions of the Sekhmet besides the actual preasure, so I cant really say. But I cant imagine that you can get remaining shot count since it had no direct connection to the main bottle.
I never had it leaking because of a loose fit. But I have tried to tighten it too much so that the gauge couldnt read the preasure and stayed on zero. So in my experience finger tight plus maybe 1/8 of a rotation.
@@michaelhagelskjr2672 Jo det er den, som jeg har. Jeg så lige i dag, at Krale har en 25 mm basis. Afhængig af om den skal bruges til flasketryk eller regulator, så ville jeg have valgt den lille til regulatoren, som jeg bruger den til.
@@rogvimohr I agree 🙂 It is in a class of its own. Far better than the mk2, and adding the mount takes some of the good feeling away, but as I said, I got used to it and now I dont notice it, but I guess that it is kinda cost benefit. I like the info the gauge gives, so a tiny sacrifice (as Im feeling it is) is worth it in my mind. But I fully understand if other might feel differently 🙂 And how nice that we are not all alike 🤗
Another great air rifle channel in the making. All the best 👍👍👍. From India.
Thanks mate for more footage of the Porsche !! This is a beauty 🙂 I'm just too sad that my family sold the old Porsche Allgaier of my grandfather years ago. I think it was an A111. There's been a Sekhmet on my Dream-Tac (I use it as a regulator gauge) for a few weeks and I like it. You just cannot have a repeatable tune on a rifle if you don't have a precision gauge that doesn't drift. And this one seems to be consistent!! Happy shooting
Love your channel keep them videos coming and I love the tracker just amazing
I appreciate you sharing your goodies at the end! Consider a video or two on the 360! Maybe a walk around for one and a ride along for another. I know I would watch. I'm willing to bet many others would as well!
Hi Joshua
I have done quite a few videos on the 360.Head over to Peter On Cars 😃
@@VikingAirgunner Ha! Will do!
les personnes comme vous c est la vie amicalement un papy de Normandie (FRANCE)
Great video, again. If I get my FAC I will buy the gauge. I was also really curious about the chrono support, especially as the harmonic tuner doesn't work when you start attaching things to your barrel... And then you explained how you'd made it.This is now on my to do list! I too had noticed the Porsche logo on your floor before, my attention drawn to it because I too used to have a 997, 16 years ago. The fact you now have a Porsche tractor made me laugh out loud. Brilliant! So entertaining. Thanks for all your effort and for sharing.
Thanks for your comment Nicholas 🙂
Im happy that you found inspiration in the mount for the chrono. You will really like it.
Its funny with the tractor since I wasnt really a Porsche guy in the past, but after getting my Cayman I started looking at all kinds of videos, and one with a Porsche tractor came up and I think I was laughing as hard as you did when I saw it - and one thing let to another and here it is 😃
You can check out the commercial here on UA-cam. Search for Porsche commercial - it is so funny 😃
Installed this angled mount today on my m3. I instantly regretted it when i pulled the charging lever. Now my indexfinger gets stuck in between the gauge and the charginghandle. Going to mount to smallest possible gauge and hope that mitigates the new problem.
No doubt that it is in the way, but you will get used to it and find a way to pull the leaver. I found it just as anoying like you do, but now I dont notice it at all 🙂
@@VikingAirgunner I guess its like new shoes? Gotta wear them in first :) The upside to seeing my reg pressure is well worth it. I fired about 200 shots yesterday after posting. Cant say im a fan of the new charging grip yet. Im contemplating an angled/curved handle that might pass over with more clearance.
Back to the pc for some modeling work:)
@@reyalPRON it would be very nice with a different grip. Maybe a something made for the tips of two fingers 🤔
@@VikingAirgunner I will be designing some bracket in 3d studio shortly. Do you want me to keep you updated on how the progress is going?
@@reyalPRON yes please! I can imagine that most who has installed the angled gauge mount has had some thoughts like this 🙂
Great stuff mate.....was only watching Airbuks video on the gauge mount last week.....think you have convinced me to get one.....does it get in the way of the cocking lever ?
It is absolutely fantstic. Im using it every time I fire a shot. And having it makes you more aware on when to fire according to the speed of the fill of the plenum.
It IS in the way when you cock the gun. Had me worried in the beginning, but now I dont think about it anymore after getting used to a different way to pull the lever.
Highly recommendable 🙂
Nice setup you have for the chronograf i bought the fx mount whit the carbon pipe that sits on the side, but I dont know if I am doing something wrong because it isn't as consisdent sometimes it miss the reading of maybee 4 shoots, could be because it is sitting on the side instead of under the muzzel
Saddly I think that it is pretty common with the chronograph to miss readings. The things that I check when mine is playing tricks is to check the batteries first. Then the position - not to close or to far from the muzzle. I thought about the fx mount, but for balance I thought it would be more precise under the barrel - I might be wrong.
After making this video I got a cf pipe from China instead of the one in metal in this video. Looks super cool and a cheap solution. I will make sure to show it in one of my next videos 🙂
Here is what I did on my FX Dream-Tac: Saber Tactical bottle clamp + 2 scope rings + 50cm carbon fiber tube OD=1''. The FX chrony is JUST where it would be if it was hanging underneath the exit of my Koï. It never misses a shot. Be sure you don't have any obstacle just near the front side of the chrony as that really creates reading problems (I experienced this issue)
Parabéns vídeos excelentes like garantido sempre
Have you started using the other functions of the Sekhmet, and are they working well and useful?
Hi Pat
I have only been using it as a reg gauge so I havent used the other functions at all.
Bit of an overkill, but Im super happy with it 🤗
BALLIN!!!! 🤑🤑💰💰
I appreciate that you leave the magazine in the gun while you do this... To many safety cautious youtubers are doing stuff like confirming the gun is unloaded by removing the magazine and shooting the gun in a safe direction before performing work, but not you my friend!
Next video you should demonstrate how to do everything while the barrel is pointed at the family pet :-D
(I'm just trolling you, not a bad video otherwise though ;-) )
😂😂
nice
Hi, do you know the size of xring under the manometer? I have leak from the manometer, after careful inspection i noticed that the x ring inder the manometer is broken...
Its a 3.63x2.62 NBR 70. Search for FX 19762 🤓
Do you have Huma air electronic pressure gauges for sale？
Hi, I am thinking of installing angled angled gauge as well. But do I understand it right, that if you install it angled, meaning its a reg gauge, it would not show the remaining shot count? If it is installed as a reg gauge does it give you more info than just a reg pressure?
I must admit that I havent done too much research about the functions of the Sekhmet besides the actual preasure, so I cant really say.
But I cant imagine that you can get remaining shot count since it had no direct connection to the main bottle.
Does the angled bracket get in the way?
Yes! Absolutely. But once you get used to gripping the cocking handle in a different way, it is no problem. I never think about it anymore 🙂
Others have had a problem hitting the back of the gauge with their finger on the cocking lever
Any comment? Thanks Tom
Hi Tom
Same here. When I just installed it, but after getting used to it and changing my grip on the lever, I dont notice it anymore 🙂
There will be an unsightly gap when the 360 goes. Perhaps an H2R would fill the spot.
Thats a good suggestion, but I m considering a Karman Ghia 😎
Doesnt it leak when you dont tighten it to much?
I never had it leaking because of a loose fit. But I have tried to tighten it too much so that the gauge couldnt read the preasure and stayed on zero.
So in my experience finger tight plus maybe 1/8 of a rotation.
Hello. Do you know in how many bars the gauge in the diameter of 25 cal should be ? Thanks.
Im not sure that I understand your question 🤔
@@VikingAirgunner sorry, i'm better with french. Now, I want a setting for this regulator at caliber 25
@@ΑνεμποδιστοςΑνικητος Ahh ok 🙂
I dont have any experience with the 25 cal, so I better not give you advice about it 🙂
Har en impact M3 og tænker på at montere en sekhmet gauge, kan ikke rigtig finde data på, om det er en med 1/8 gevind der skal bruges
Det er det. 1/8 BSPP 🙂
Så skulle denne vil kunne bruges ikke 😊
Digital Pressure Gauge Sekhmet 1/8 BSP Black 28 mm with carbon cover
@@michaelhagelskjr2672 Jo det er den, som jeg har. Jeg så lige i dag, at Krale har en 25 mm basis. Afhængig af om den skal bruges til flasketryk eller regulator, så ville jeg have valgt den lille til regulatoren, som jeg bruger den til.
It's is in the way
You will remove it soon trust me😊
Hehe Im not so sure. I dont even notice it anymore 🙂
@@VikingAirgunner the ergonomics are to good without it 🙂
But if you are links shooter,very nice 👍
@@rogvimohr I agree 🙂
It is in a class of its own. Far better than the mk2, and adding the mount takes some of the good feeling away, but as I said, I got used to it and now I dont notice it, but I guess that it is kinda cost benefit. I like the info the gauge gives, so a tiny sacrifice (as Im feeling it is) is worth it in my mind.
But I fully understand if other might feel differently 🙂
And how nice that we are not all alike 🤗
Everyone watching this video sekhmet gauges are plain junk…save your money
Can you share your experiences in detail?
Mine has been working great 🙂
First i heard of problems with the sekhmets. Please share your findings?
and true nothing works they are poor