Accelero III on a 1080 Ti - Exceeding Expectations!
Вставка
- Опубліковано 6 кві 2018
- You guys asked for it - let's see what the Accelero III hype is all about.
Amazon
GTX 1080 Ti: amzn.to/2sOYloB
Arctic Accelero III: amzn.to/2uR8kuy
Rajintek Morpheus II Standard: amzn.to/2GCCS4x
Rajintek Morpheus II Core: amzn.to/2GG5d9X
4-pin adapter: amzn.to/2CDu7Vd
EK Vardar 120mm 850RPM: amzn.to/2GC0J45
EK Vardar 120mm 3000RPM: amzn.to/2GAWkP6
Liquid Metal: amzn.to/2G30P92
High Quality Paste: amzn.to/2IS6YTq
Cheap Thermal Paste: amzn.to/2G4REFl
NCASE M1 Mods: optimumtechmedia.wixsite.com/...
Current gear!
Sony a6300: geni.us/IrGrgYY
Sigma 16mm f/1.4 DC DN: amzn.to/2CjRC7h
Sigma 19mm f/2.8 DN ART: geni.us/zUCgeLp
Sigma 30mm f/1.4 DC DN: geni.us/OqYZS
Sony OSS 16-50mm f/3.5-5.6: geni.us/pbto
Twitter: / optimumtechyt
Instagram: / alisayed3
As an Amazon Associate I earn from qualifying purchases. - Наука та технологія
The accelero looks like 3 stock intel cpu coolers put together
Haha nailed it!
so if I bought 3 intel stock coolers glued them together I might have the same performance?
But performs like 3 Wraith Spires glued together
the graphics department obviously went home when this card was being developed
Arctics Coolers always end up looking like that smh
Just for anybody's interest watching the video late:
I have the same NCase setup and benchmarked the Asus STrix 1080ti cooler with the 120mm Vardar fans like Optimum did. The temps after 20 mins of Heaven 4 didn't climb higher than 70°C and at 1500 rpm fan speed.
OT achieved 60°C max at the same RPM, note though that he had the temps corrected to a 20°C ambient, while in my summery hot flat were around 27°C while the test ran.
That in mind, OT got about 3-4° less on the Accelero.
Anyone planning on doing a cooler swap or getting a new 1080ti note that the cooler on the Strix is outstanding in performance and almost manages to get the same temps than this very good aftermarket product!
Very neat. I see that glass side panel paying off with a sweet looking build. I agree, finally looks perfect. Great job.
Have used 2 of these in builds and all I can sayis its an awesome performer. Loved its silent operation. Nice video.
I would love to see a g12 comparison. price to performance is amazing for the accelero.
I just installer g12 with a old corsair h105. Asus strix 1080ti oc. Idle 24, max load 42. Totally silent.
Nikolaj Nielsen ur max is nice. mine is 50ish using LM. But 240mm idcooling instead of nzxt
Under loading 42 ?
Dude you deserve so many more subs!! The effort you put into videos is awesome
Just found out your channel never knew you can swap different shrouds/face cover until I saw your video. You good sir just earned a new sub with the bell 🛎 on alert 🚨.
i have the artic accelero 3 on my founders edition 980 ti and it works well. Its a pain in the artic ass to assemble. The instructions are bad,but my temps with a aggressive over clock never went above 62c. with the fans all the way up u cant hear them. good cooler tho.
I have always bad memories with the Arctic brand...
I ordered a Morpheus II for my quiet build, i have the place for it...
But man... That Accelero III with the Ncase looks so cool... so industrial... so minimal... i love it!
I realize this is an older video, but this is fantastic. This shows the potential of an air cooled ITX enclosure. I would love to see a build like this in the TU150 with D15 on an i9 and 2080ti with exotic aftermarket air cooling.
ur the best. im glad i subscribed for these kind of information that other channels do not provide
without this video i would not be able to mount this cooler correctly.
thank you dude you are the man!!
Awesome comparison video. The accelero seems more appealing to me now since the fans are included with it.
Keep up the awesome content
Arctic, make it baige-brown, so it fits my Noctua on the cpu ;p
Holy Cow Ali! I thought you started off where I see your modern videos. ;) And dude you did a great job on this video as well. I know you’ll keep developing as a video producer.
I love these videos because they’re both informative and pleasant to the eyes, those montages!!! Also can we get an EVGA hybrid cooler video? That would be awesome
Great video man, your camera work and editing deserves a lot more subscribers. and i will strive to get to your skill level.
best accelero vid that shows how to put spacers on. all the other vids skip things or do them wrong.
just ordered this for my 1080ti Hybrid that had its pump start dying, excited to see reasonable temps again lol thanks for the vid
Mate, you just solved every question I have for a Ncase build. Definitely earned a sub. I was wondering about having that cooler with 120mm fans as an exhaust and I stumbled across this video just looking for info on the Accelero.
I have the Arctic cooler Back in the days to cool my GTX 280 😆
I was super excited to see this video after your instagram post and I wasn't disappointed; I might do this mod (that's if I can get my hands on a GPU for a reasonable price... lol) The pages of your notebook were literally about to be turned by the airflow of the fans!!!
Had that one on my GTX280 and 780. On the 280 i couldnt fit the vrm cooling fins that came with the heatsink back then, so i had to saw some pieces out of the stock cooler and fiddle them to the card. worked amazingly well and that card still works today. i put a very silent fan and OC profile right into the cards bios and never had to touch that setup again.
on the gtx 780, i changed to watercooling after a while, but only to put the card in a smaller case. temps didnt really change that much. great cooler.
This is the most detail video about VGA cooler :)
I Remember the time of my sli gtx480 with Accelero on them so nice^^
I just built a Fractal R6 with Noctua 15D CPU and Morpheus II cooler using a single Noctua 12-15 slimline fan with low noise adapter positioned in the center of the heatsink and have gotten great results with it. Fortunately I have room to spare in this case. This combination is super quiet using the R6's fan hub to drive the case fans off the CPU connector and with the low noise adapters on both of the D15 fans.
The Accelero III looks more complete, however the plastic shims looked a bit cheesy. I liked the all metal attachment on the Morpheus better, but the Morpheus II solution does look more bolted up than like a finished product and is definitely bulkier.
I'm just happy that I can get this quality of cooling without messing with water cooling and I'm glad there are solid options for air cooling GPU's.
Why not use good thermal paste like Arctic MX4?
I don't think it's fair to say that the VRM temps are significantly better on the Accelero since you left the stock EVGA heat sinks on there for the Morpheus cooler. Whether or not it would have made a difference, I'm not sure, but you compared the heat sink of the Morpheus, not the included pads/heat sinks.
Great video though. It's given me something to think about.
Edited wording.
P. S. This is still a wonderful video and the VRMs are perfectly fine on each card with both after market coolers. We appreciate you investing the time into the testing and comparisons. :)
Very fair, completely overlooked.
My apologies!
You beat me to it!
Optimum Tech Yeah, the moment you started comparing the vrm temps I could feel the little gremlin inside me reaching for the comments section, nice to see you recognise the problem
P.S. you should probably like/pin this comment so other people will see it after watching your video
Even in that config it was a couple degrees diff. For a few ° I would never void warranty by gluing heatsinks on. So easy to go back to stock if issues arise with the morpheus and stock vrm/vram plate.
Now you need to do another comparison!!
Normally i wouldnt like the look of that cooler but it does look reelly good in your case with the rest of ur build, great video.
Great video m8, love the build.
I've been running as Morpheus II on my Vega64 since 2017 and I gotta say, I'm really happy with the results.
Using good paste (Kryonaut) and two Noctua NF-A14 fans the GPU never exceeds 60C even with a massive Powerplay Table overclock that can use up to 400W, i even used the silver backplate by zip tieing it to the PCB.
The biggest problem as you said though is that it makes the card 3.5 slot, so I am having issues moving to an SFF case, so I've been thinking of building my own to fid the Morpheus because it's just so damn good.
Really great video , you are a person focusing on the thermals and looking , which i can say that's what real enthusiasts is looking for , appreciating all the time that you invested , but here what i would like see ... The real game changer is to go with liquid gpu cooler or keep sticking with air cooling solutions ?? That's what i hope to see from your next video
glad i bought the morpheus II. I was looking at this cooler. I already have two noctua 2000rpm fans though.
I'm considering custom loop.
Can't wait for the Dan case 4 and/or the louqe ghost to come out this year but that's not gonna happen until probably q3 or 4 but I'm excited. Your channel has made me want to make a sff PC with custom cables and maybe even a custom loop with some of the best components you can get so thank you for that also love the camera work you do
def going to get the Accelero for my m1
It is the single most iconic GPU cooler of all time, I’m still impressed by how well it performs after all these years despite its somewhat thin design.
Very good vid man! You deserve alot more subscribers. I will share the video with my computer geeks out there :)
same here, running 30 degrees cooler on my rig with GTX 1080 then the stock cooler, and is pretty much silent. never throttles anymore since i have this cooler, it's perfect.
With RDR2 on high settings it ran 82 degrees celsius and throttling back 250mhz to keep it at 82 degrees (fan speed 100%), with the Arctic Accellero Extreme it runs 50 degrees celsius and never clocks back at high-ultra settings (fan speed 50%). It's a beast, and it is silent. I use the back plate cooler, its much better, the fans blow on the chips and the pcb is cooled from the back, and it works perfectly.
I still love the industrial look.
I wondered how much dustit was eating.
This is actually the only time I would go for an aircooled graphics card...
I was able to get my Accelero fans to 2170 rpm. I only have the twin fans instead of the triple fan layout. However, my GTX 970 SC Hits a max of 55c on full load with an overclock and overvoltage. Before, I had the EVGA ACX2.0 stock cooler and hit a wopping 70c on full load without overclocks. I can't wait to see if there's going to be a bigger difference when I upgrade my case for better airflow.
I have tried Accelero IV and NZXT G12 on my Gigabyte Windforce 1080, i paired the G12 with an old H55 from Corsair.
NZXT G12, H55 Corsair AIO, IPPC Industrial 3000rpm Noctua 120mm Fan (25 idle, 45 gaming)
Easy to install, check AIO cooler compatibility, look for old Corsair or Thermaltake. in the downside you need 3 Fan headers for GPU G12 Fan, Pump and Radiator Fan. You need a fan splitter/hub and a pwm "mini" (conector of the GPU) cable to pwm to control all those fans from GPU software or you can connect them to all the Motherboard fan headers, also to find a place to place the GPU radiator in your case.
Pros:
Best cooling performance (25 idle, 45 gaming)
You can choose 120mm, 140mm, 240mm, 280mm or even 360mm radiators (check compatibility in NZXT website)
you can choose any fan
Price is lower than an Artic Accelero considering and old 120mm radiator
Cons:
You will need PWM fan connector and a splitter/hub to control all your GPU fans from a single software
Space needed for the radiator
Lots of cables to manage
Noctua industrial fan was very noisy, even at 1500rpm
Artic Accelero Xtreme IV (28 idle, 55 gaming)
I returned and i bought an Accelero IV, it looks cheap but hell the performance for an air cooled. Installation is somewhat complicated if you never done something similar before, also you need to test fit because instructions says that you need some washers but the GPU wasn´t making full contact with the heatsink. Also the backplate/heatsink is so heavy and bulky that may interfere with ram slots, making the GPU to sag, so be careful. The 3 fans come powered by a single "mini" pwm connector that you can plug it directly to your GPU and control them with any GPU software you use.
Pros:
Less cables
Full fan control without needing additional hardware
Performance similar to AIo cooling
Very quiet fans
Cons:
Overall weight of you GPU
Can cause your GPU to sag
Heatsink and fans occupy 4 PCIE slots
Backplate can interfere with your RAM sticks
The reasons i choose Artic Accelero Xtreme IV:
My need to clean my system often, so to take the GPU out it's only 2 thumb screws and PCIE lock with the G12 it was more work and more cleaning. The Artic fans can be detached without any screw, so you can clean them or even mod it.
The other reason was to switch to an mini itx (Cougar QBX) case without sacrificing performance.
The last one is a cleaner build for me, as the only “visible” cables are CPU, MOBO and GPU cables.
I used to have accelero II for my 9600GT. Best damn purchase ever ! Totally passive, no noise and max 60C stressed. Those cooler used to be all the rage few years back. To think about it, maybe try doing KalmX like card slaping this or morpheus on 1050Ti or 1060 without fans.
Had the previous version of the Accelero on a 780 GTX, it was awesome.
Steve Boyd my stock gtx285 finally ran quiet and cool 🤣😂
using this cooler on my 980ti for more than a year! Dropped my load temps arround 15c and noise level way down. It isn't great looking but perf>look
Hey i like to buy it this cooler to my 980ti G1 gigabyte card so what are the max temps under load & gaming.
I think the reason it was hot on push is because fans lose a lot of airflow being right up against the grille like on the bottom of the M1 and also negative case pressure generally works better for temps.
The ability to use the EVGA midplate to cool the VRM and VRAM is a huge advantage for the Morpheus, as the Accelero heatsinks are a major pain to deal with.
Had one on an r9 290 and it was awesome.
temps? and which brand 290?
Chris T It was a few years ago, but low 60s from memory. It was a reference Powercolor card.
sick build, you gonna run with this cooler now? I think I might have to get one or two of these. thanks for the links
Great Video! I always was interested in how the Accelero X III performs against the Morpheus II
I own a Arctic Accelero Xtreme IV 280x Edition since 4 years. It has a special cold plate to best fit AMDs GPU from HD 7000 up to RX580 die's. But also works with smaller Geforce chips. It is currently mounted on a Zotac GTX 970 to replace the broken fans. And it works pretty well! The 970 is oc'ed by 175 MHz, power target is on max and the card reaches only 51°C in Final Fantasy 15.
The Accelero Xtreme III and IV are my favorite GPU coolers. It blows everything out of the water in cooling and is basically noiseless and 100% silent in a insulated case.
I love this Cooler :-D also for its pure and functional design. Nothing is so beautiful as a giant heatsink ;-) But you are right, the fan shroud looks pretty out dated.
PS: TDP - Arctic is very conservative and carefully by stating the max TDP. If they say the Cooler has 300 Watts of cooling potential it has probably 350 Watts. Its a number you can rely on it!
hello nice temps what about at full load FurMark and heaven 4.0 ultra presets max temps
You're aaalmost looking straight up at the roof. That's how cool that looks.
I have been thinking of getting 2 of these for my sli 1080 tis.
Would love to see a comparison with the NZXT Kraken G12.
Watercooling will always be better than Air cooling on that scale. What you have to consider is the cost of an AiO and these come in various price ranges. For a comparable result, you will be looking at some cheap china AiO.
How much space is left in the front of the case? I have an ODD up there. Also could you still use the default EVGA Backplate? And how do you control the fans?
I love your videos
Thanks!
Very nice video, as always! Is it possible to effectively use EK Fluid Gaming loop A240G in M1 Case? Could we use normal fans (not slim ones) in the bottom of the case for radiator cooling? And if not, how slim fans performs? Big thank you in advance if you can give your opinion, and much bigger thank you if you could test this option and make a video!!!
Great build
I have the Morpheus with 2x EK Vardar 3000RPM fans on an Auros GTX1080ti and easily the best cooling option for the VRM and memory is naked with airflow. Unless you shunt mod the card (which you wouldn't do on air anyway) the VRM stack on even a reference card isn't getting hot enough you need to do more than 2x120mm of airflow right above it. Drop a 120mm fan on a naked motherboard VRM and it will better than stock with a heatsink.
Next video should be about replacing the CPU stock heat sink with a custom copper for better heat contact with your air cooler
Most of the air a fan moves comes from the tips of the blades, those 120mm fans were probably too wide for the fin stack of the heatsink as most of the air would be pushed around to sides rather than through the fins in the push configuration.
Very nice and informative video!
I‘d be interested if swapping out three fans from intake to exhaust in a 360rad, what this would mean to temps, since it did such a big difference here!
The Accelero coolers have always been pretty rad in my book.
They've cooled every single GPU I've slapped them on so efficiently it's not even funny.
They're just so quiet and perform exceptionally well.
glad i found this channel
I've had a couple of Accelero III coolers and I wasn't very impressed. One on an R9 290x and the other I tested on a GTX 1080. I got much better cooling on the 290x by just removing the card's stock fans an strapping on a couple Corsair SP 120 fans over the heat-sink than I ever did with the Accelero III. Yeah, it didn't look pretty, but it was a hell of a lot quieter and cooled much better.
Can you reccomend some thermal adhesive? I recently installed a G12 and would like to install some VRM heatsinks just for added peace of mind.
VRM temps aren't really a fair comparison considering the morpheus only had the default EVGA base plate which is designed to contact the heatsink above for heat dissipation. On another note, just found your channel and am enjoying your videos!
Great review!
Info for anyone thinking about it:
My blower-cooler GTX 1080 ran 83deg with thermal throttling before, and loud fan noise.
Now 60deg full load, pretty quiet.
I actually prefer the look of this cooler over the stock one
A job well done man but I'd love it more if you tried it in a bigger case with other fans working with it, we might see lower temps. On a second thought though it may be already obvious haha.
I can only imagine what happens when Accelero would have a revision or when the Morpheus would have a 3rd fan slot.
Been rocking this cooler in my M1 build for a while now. If you're trying to make your build quieter by lowering your rpm while keeping solid Temps, I definitely recommend doing this.
Just make sure you know the limitations of your gpu warranty.
Well said. I'm very late to the party on this one.
Still blown away by the performance on it.
How do you control fan speed? Can you adapt the speed depending on GPU temp through the motherboard?
I put an Arctic Accelero III on my EVGA GTX 1070 SC. My temps went down about 15 degrees and its so damn quiet compared to EVGA's cooler.
I want to hear the idle nose difference between a hybrid card and this setup!
If I see your video, then I immediately press "I like this" ^^
Thank you very much.
The difference in VRAM and VRAM temps when comparing this to the morpheus likely might have been due to using the stock fins/heatpipes on that EVGA 1080ti rather than installing the individual heatsinks for all the components that also come with the Morpheus.
Nice build! How are the load (game) temps on that m.2 SSD? sorry for my bad english and thank you for your help!
1:04 - not to mention the TIME it will take to acquire the fans and install them. Not a big deal for a "techie" (probably have them on hand) but could mean an odyssey of confusion and frustration for a noob like myself.
Optimum Tech is the Lord of aftermarket GPU coolers
Running the Accelero IV on my GTX 1080 FTW2. Have liquid metal on the GPU and it sits right about 45C when fully overclocked :)
FPSkillerPC liquid metal doesnt give that much better, compared to regular thermal paste. Also there is noise factor. I prefer higher temperatures at the benefit of dead silemt (500rpm) rather than a 1.500rpm just to cut down temperature further.
Webdigo the temperature difference between noctua nt-h1 and thermal grizzly liquid metal seems to be about 5-6C for me. That's substantial enough
What noise factor are you talking about? These are both silent coolers.
FPSkillerPC you beat me to all these videos
Haha oh well.
You, and I look fairly similar; Regardless, I put an Arctic Accelero Hybrid III 120 on a 1080ti FE back when they first came out. I've been quite pleased w/ the cooler; The included 120mm fan(s) for the radiator are inadequate, however I put Corsair ML 120s's sandwiching the radiator, and stay under 60c overclocked to around 2050+Mhz on the core, 6000Mhz for Memory; Point being, I like Arctic;
When the Accelero Xtreme III is fitted without the fans is it still a 2 slot card?
i want one for my rx 580 it need that cooler so bad it gets soo loud when i want to get 300 fps in games
My Gigabyte 1080 is very loud and pretty hot. Is this something you would recommend?
I bought a bunch of GTX 1080s that were mined with and the fans all failed so I got them for a great price. I put on the Accelero coolers and couldn't believe how cool and quiet they ran. I'd definitely recommend it if your case is big enough. You can also change out your thermal paste with some Thermal Grizzly Kryonaut and it'll drop the temps.
Wondering how this would perform with the Zotac GTX 1080 Mini. Or whether it would even fit with the different PCB Layout. Considering buying the nCase M1, but concerned about thermals coming from an NZXT H200i.
Great review!!
Yeah I’m doing this to my sc2
IT would be cool to know, how the temps would be in a vertical orientation without Fans, just with airflow from Case Fans.
Like in the sidearm t1, Ghost s1 and so on.
I have a qbx case, will this set up work in there. I feel like the two cases are very similar on gpu and fan placement
How hard was it to take apart the 1080ti sc2? I can’t find instructions anywhere but this vid made it look like minimal screws
I'm thinking of getting this for my R9 380.It runs 55C when I'm not even playing a game and it would be nice to have a cooler like this since I can re use it.
make more itx case builds!
I would love to see the accelero compared with the morpheus using slim fans (which do fit in the m1)
Cooled my GTX 560 with a Accelero II silent gold ! Cooled my R9 280X with a Accelero III for low temps and silence. If my ASUS STRIX 1080 will be loud it will get the same treatment. Those gpu coolers are GOD LIKE !!!
Optimum, that was your alterative mounting solution? Hoping to fit a backplate on my mod. BTW, Merry Christmas! :D
Interesting about the pull config on the fans- also agree with the styling- purely a functional product over form a la brown noctua fans.
Build looks very sick now- That's one dense case!
@OptimumTech Have you checked out the Cryorig C1? It seems like a really cool cooler for the M1 even if it doesnt cool quite as well as some others. Im thinking about putting it in my M1 but i wondered what you thought about it
Shouldve just screwed off the front IO plate thing and then reattached it after the card is inside the case. Had to do that when cramming my gpu into my SFF
Awesome video. I much prefer the aesthetic to be honest; I think it’s lovely. But then I remember cooling my gpus with passive copper heatsinks, and when all AMD cpus didn’t have heatspreaders. I much prefer clean, simple builds.
I’ll take some shadows and white LEDs over the current Unicorn puke aesthetic any day. I’m not saying I’m against it, my next build will be filled with RGB, it’s just that I’ll be using soft white lighting with a colour accent.
Anyway, this and a few other vids have inspired me to sub, thanks man.
yes pls to a vs g12 beaucse i have a msi 1080 ti armor witch has very bad temps and need to see the cooling options around there.
As I was watching you put the thermal adhesive on the PCB components and the adhesives on the cold plate, I was thinking, "Wow, after all of this, I hope he keeps it as-is." I also felt a little sorry for the 1080Ti with the number of times it's been disassembled. Serious question though: Have you noticed any changes with the CPU temps after flipping the fans down below? Also, do you expect to be able to keep this cooler setup when you swap to the Dan C4 (eventually)?
I actually like the look of this cooler. I have a gigabyte 1080 thats very noisy and not that cool under load so i might consider this.
Can you put this Accelero on a Founder Edition GTX 1060?
Great review! but why chose accelero 3 instead of accelero 4?