Rebuilding the Front Differential on my 97 Dodge Ram 2500
Вставка
- Опубліковано 21 вер 2022
- We had to tear apart the whole front axle and differential of my old truck. It needed new carrier bearings, axle seals, pinion bearings, pinion seal and new end yoke. We cut off and replaced all the bearings in the differential without any fancy tools. It is a fair process and amount of work but it is really not that difficult and with all the parts ready to go it does not take very long either!
Welcome to Traplines and Inlines, this channel focuses on my dog and I on our remote Off the Grid Homestead in Northern Canada. I make videos on off grid homesteading and building, trapping, chickens, mechanical projects, and hunting and fishing.
I went offgrid and started building my cabin over two years ago, while I was still in highschool. Since then I have built many things at the homestead and have had the priviledge of learning many things along the way.
The homestead is designed to be relatively low maintenance and with extremely minimal expenses. All of my electricity comes from solar power, heat from woodstoves, and I haul all my water so I dont have any monthly costs associated with my homestead.
I love the lifestyle, especially because it gives me the absolute freedom to do whatever I please. I plan on continuing to tackle awesome projects and work at building and fixing many more things, and I cant wait to share them with you on the channel.
Thanks for watching! - Розваги
To be just 21 you were blessed with more common sense compared to the majority of people these days. You will make it if when this world goes south.
I worked in saskatchewan for years them old Farm boys are handy and smart
My man is hard working and not afraid to fail at trying. That makes him deadly 💪💪
Damm straight, this young buck is an ace 👌
Enjoyed your video, you're very inspiring... Love your videos keep up the good work.
You should be very proud of yourself, and your family should be proud of you too.
@@chrisbourgeois2695 Spent summers in Saskatchewan on my Granpa's farm and friend's farms as well. Hard work in a short time. Kids today don't have any work ethics! And citidiots couldn't handle no grocery store! My Mom is 93 and lives by herself and maintains a garden every year, AWESOME COOK and BAKER!
repairing, filming, commenting all in one : you just produced a " totally deadly" teaching and instruction video!
This is a scam
I JUST LOVE YOUR VIDEOS. Regardless of the subject matter. If I was to be stranded somewhere under any kind of conditions and could pick anyone I wanted to help me survive I would ask for 5 of you. I don't think there is anything you can't do and do well. This world would be a much richer and better place if the majority of the young generation were as tenacious and assertive about getting things done as you. You are a remarkable young man.
People we are witnessing a very rare exceptional event here. A generation Z that is a very hard worker and mechanically inclined. Very very rare these days my nephews can’t even check their own oil and tire pressure maybe they can but just don’t want to get a hangnail.??? Very reassuring to see a younger guy with this much knowledge and work ethic..
Man, do you know how great I feel after watching your videos? You sir, are inspiring....coming from a 66 year old.
Amen! I’m 61 am so proud of this authentic ALPHA MALE!!❤️❤️
As a 74 yr old woman, I too appreciate seeing this young man's abilities to figure it out & Get-R-Done perseverance/determination! More people like this youngin will survive than self-absorbed, highly over educated, elite people with no moral fiber, common sense, or practical abilities. God Bless this young man & others just like him!
Happy birthday Kyle.
Your the only person I'll watch for 40 minutes
Totally impressive, camera skills and mechanical skills both! Bravo, sir.
And he's 21 !!!! Amazing work ethic , and very practical mentality . By the way , nice honey harvest ! It was a great video .
This Video Is Motivating Me !~!~!~ My 97 Dodge 4x4 Just Sits waiting On Me !~!~ Thanks For This Video I Admire Your Ambition !~!~
You're not wrong. Right tools for the job really help the frustration level.
Having worked as a mechanic for 30 years, and rebuild dozens of those things you did awesome for the first time. And as far as the contact pattern I've only had maybe a couple that screwed me and had to shim.
I wasn’t getting all your notifications.. I’m sorry to hear about your dog buddy. The new saw is pretty sweet. Few Fbombs and the parts and Bob is your uncle! 😊💪🏻 great to see your vlogs again! 😊👍🏻
So impressed by this dude. Talk about drive.
The problem with tools is the more tools you get the more you do...the more you do the more tools you need...then after you go through that cycle then you need a place to put all your tools...the final obstacle is finding the tool you need when you need it. 🤣
the man of the year is back in Action again it's a blessing to see your videos my brother now let's get it💪🏿🖤💪🏿🖤💪🏿🖤💪🏿🖤
Superior job, My friend! I do admire your mechanical skills. You're right about the fact that doing your own repairs on your vehicles saves a lot of money. That's really an understatement! The hourly rate in your average auto/truck repair garage is going through the roof these days! Anyway, I enjoyed watching you do the repair. Good luck as you prepare things for the coming winter up there in old Canada.🇨🇦
True. It will cost $1100 to replace the timing belt in my car & almost all of the expense is labor. But I love the goofy old car so much it's worth it to me to have parts replaced vs buying another car.
You are blessed with a trait that many are scared of, being able to take that first step into the unknown and back! Learning by mistakes where others won't even try! I've made a lot of mistakes over the years, but that's why I can fix anything, except my wife! Your life is already full of accomplishments, and many more to come, enjoy, A!
Dude. You're 20? That's crazy! You are going places. I'll tell ya that one Fer free
Your have the skills of an Automotive Service Technician. Sure, saves a ton of money doing your own work. And much better time of year to be doing 12 valve maintenance. Be safe my friend.
Hi Kyle 👋 Thank you, appreciate you my friend, always great to hear from you, stay safe and take care 👍🙏
Happy birthday….. good job on the front differential. !
Very good work and excellent timing. You caught that before catastrophic failure. Doing that job in the middle of no where with 2 feet of snow at 10 below sucks, I know first hand. Besafe !
You are definitely deadly!! So cool to see a young man with your talents and patience to tackle these kinds jobs, well done! Love your commentary and sense of humor! Looking forward to the next video! ✌🏼❤️🙏🏼
At 21 years young, your mechanical skills and work ethics are top notch, Good job.
Happy Birthday Kyle have a good one.
Man just gotta say it’s rad to see the personal growth you’ve gone through over the years. If there’s one thing certain in life it’s that buddy from traplines and inlines is getting shit done and being real about it. Always looking forward to more from this channel. Mad respect bro!
This is a scam
@@davidpassword report them
Agree 💯. I'm from Maine and this kid has more common sense and self reliability than most 25 or 30 yr olds nowadays. He's going places in life.
You are very lucky to have the skills to do this, being off grid you needs whose skills. But most people are limited in life skills
Well impressed with your knowledge and patience…good man! 🏴
Thought this was a whistlindiesel video y’all look like brothers 😂
Another great video Kyle! You never disappoint. Happy Birthday!
Let me tell you something young man, you are a breath of fresh air when it comes to the younger generation. Common sense no bs and not afraid to get your hands dirty!!!! Keep doing what you are doing.
Good job not many your age could've pulled that repair off as easily as you did.Happy Birthday Kyle! hAVE A safe day and enjoy yourself. Look forward to your videos.
Watching from the uk 🇬🇧 👍👍👍👍
Getting it ready for when the snow flys I see good job
Great video my friend!! Today's project was a good one and you really got it done well!! Hard to rip things apart when you are away from a town that might be able to help you with a few loaner tools or more parts - you have to plan ahead - but you adapt and get it done!! Hats off to you for a job well done. Take care, looking forward to another project! 😀
Buddy Guy, if you removed all the connections between the fence top, middle, and bottom strands and only connect them together where the power is connected, you could remove the bottom wire as it gets grounded by snow, then the middle one, as it gets grounded.
"I'm gonna be 21, time fly's", I love this fucking guy!!!!! Always a great day when you post man!!!
Keep at it. At your age I was a fixer also. But know I'm 70 and things have changed. No more carbs, no more distributor, everything is freaking electronic. But I got me a honest, fair fixer. So all is well. Good job, now get ready Fer winter. 🙃
You can tell a good mechanic knows how to choose a good hammer. I love that 3 lb blacksmith hammer too!!! Perfect! I have other good hammers too.
What a great way to spend about an hour on line. I can remember back in the day working on my trucks and my brothers. His go to line was grab me anothe PBR! I also remember not so great times in the dead of winter putting a heater core and radiator with all new hoses in my Bronco laying in the gutter with a minus 20 windchill. Did it though cause basically I had no money for a garage to do it and I had to get to work on Mon. 75 miles away. Dude your swinging way above your weight. Stay safe up there.
" a little 80-90 and a few curse words and we'll get er done"
No cursing= no fix. Just a universal law no matter the country or language.
Right dandy rebuild! Mad skills! 😎👍 A real bush Michelangelo Renaissance dude!
Happy birthday, young fella.
You sure have a lot more sense than I did at your age.
Yes, 🎊🎉Happy (soon to be) Birthday🎉🎊 to you!🍾🥂😀
Happy B-Day from Idaho.
Thanks for sharin'.
Good job little brother. Good to see ya chuggin'.
Another deadly vid 👍🇺🇸
Nice work.Ingenuity at its finest.
You’re hired 😂
Happy Birthday.
You’re an amazing man!
Alpha Male❤.
Authentic! ❤️
Love from, Kansas 🇺🇸
Give her a couple love taps, that’s generally the road I like to go!!!
Love that comment!
This was a deadly video friend. Love the detail you put in to the disassembly and reassembly. A little frustration,a few swears and ah we’ll get we done. I know exactly what you mean. Awesome.👍👍
Just introduced to your channel by my cousin who knows your family. I think he knows your Uncle or Auntie in particular.
Gotta say you did a deadly job on this diff my friend. I overhauled my first diff on my 95 dodge when I was 17years old as all the axle seals were leaking. Im 40years old now and have been a journey man heavey dutty tech for 21 years now running my own mechanics business. I would hire you in a heartbeat over another certified tech. Your work ethic is second to none for your generation eh.
If ya ever have so many seals leaking on a diff again be sure your diff breather is not plugged. If she is plugged you will do all that work and she will blow the seals out again, no doubt abouter..
We have a lot in common as Im fleshing a coyote while watching your video.
Ahh great to see the ‘ol 12 valve again! 👍🇨🇦
Very impressive.
Very good job.see you on the next one 💯💯💯💯💯
MAN THAT,S ONE JOB I WOULD NOT WANT TO DO. YOUNG MAN YOUR A TOP NOTCH MECHANIC AND COULD MAKE A LOT OF MONEY WITH WHAT YOU DO AND KNOW AROUND TRUCKS GREAT VIDEO .
You can use some of the old bearings as distance dummy bearings if you just hone the ID. Then disassembly is fast. I’ve done that before when building roots blowers. Makes my life so easy. Good job! 💪🏻😊
Dam good job from Louisiana United States
This was a great video. Extremely enjoyed it. Glad to see another video from you. Look forward to the next one. 👍
Getting after it! Good seeing another video from you brother
Saludos de Toluca México
Where I grew up you always drove around with a snowmobile or ATV in your truck bed in case you broke down. And carry spare clothes and food of course. Love your style bud, keep er up.
It's funny how you started the project and then two short clips later you're covered in dirt. Gotta love fixing shit 😅
"A little 80-90 and a few curse words" hahahaha
Damn dude I didn’t think you were the same age as me! You’re living the life!
That was a job bud! I love how you make the tools to work! Good luck with everything my friend!
Birthday coming up?.well happy birthday young feller.oldtiming neighbor from northern Alberta.
21 and you have your own land, your own built cabin a good homestead truck, you're doing things right 👍you crack me up with some of your comment's aye! LoL Hey are you a Flames fan?
First year of that body style. I almost traded my 79 ramcharger in on one. Really like the 97 dodge trucks.
Great episode of your daily life.
"It's real hard to be prepared for everything, but fuck it" lmao
Very good job! I didn't know that the 97 model was equiped with that front end differential, egage and disengage long right axle shaft passenger side.
I have always found differentials confusing, to tell the truth. Thanks for some great shots of how the components fit together!
I was very impressed with your video! You have great resourcefulness and skills for being so young!! I have been with BMW for thirty five years and I am very impressed with you! You have a bright future ahead young man!!
Love how you talk us through it all
Great job
😍I do love watching a dude work on his truck lol
Thankyou sir . Please keep them coming.Hello from Alberta.
HAPPY BIRTHDAY 🎈🎈🎉🎂 hope you have a great one
Just found your channel and I have been getting catch. You are deadly. I am amazed at how hard you work. Really enjoy watching. Thanks for the videos.
Great to see you again. I like that you have backup jack stands. Out there alone a boy pinned under a truck is bear food. You have so much knowledge for your age. I like how you chat through the whole build process. Those are nice looking tires. I would drag a good magnet around the axel tubes and the diff for loose metal and needle bearings. Looking forward to the next show. Good video. Pax.
Have a wonderful birthday!
🎉🎂🎈
Your overall knowledge amazes me! I’d be so lost. Great job!
Peace and love sir. Damn hard job to do by yourself. Won't be long afore you need those front wheels pulling. 😊
Just discovered your channel a week back. You’re impressive brother. Great skills!
Nice job dude.
Pays to do the research before hand and getting into such a job as this.
Did similar to the 8 3/4 axle on a drag car ( 1969 Dodge Coronet 440 ) when I changed the gears to Richmond gears.
Just about to invest in buying another Dodge, a Charger SRT8 6.4 ltr in PX8 paint ( Pitch Black ), red leather interior..can't wait to get the beast on the road here in England
This young man is pretty damn unbelievable. I am so impressed at everything he does. This world needs many more like him.
Your awesome man! Super funny and knowledgeable, keep up the hard work . Stay humble and life will be good to you.
Just want to say I'm twice as old as you but I love watching you the work you do I'm learning so much from you and how you do things so thank you so much and happy birthday can't wait to see you build your log home
GREAT VID, TOP JOB. FROM UK.
AWESOME VIDEO 📹👏
Couldn't have any better.
Crap....
I learned something in the process 😌💯.
Keep up the good work id I was younger I would visit bring some beer
Good to see some youth and ambition getting it done looks good hope she works out good for you thanks for sharing
good job
You're so talented. I don't do any of this type of work, but I love to watch how well you do it, and not be scared of breaking more stuff. Nice job. Make sure to let us know how she drives, next video!
true Canadian persona and good work . great vid
Didn’t have a clue of what you were talking about explaining the problem with the different parts and procedures to take them apart. But amazed about your skill and knowledge on how to fix and put them back together.Even more not finding a single nut on the ground after finishing the job!!lol
Happy birthday buddy
You are one of a kind!
Think your in a big job
This is the guy you want with you in the apocalypse lol
It's good to be inspired by a man half my age. Keep it up buddy!