REBUILDING A 2018 CAMARO ZL1 QUARTERPANEL & DOOR WORK Part 3
Вставка
- Опубліковано 27 лип 2022
- Welcome Back! Ivan gets to work on the 2018 ZL1. Starting out he removes part of the old quarterpanel and got a donor quarterpanel and door from a 2020 Camaro. He make sure it fits and starts on the donor door that also has damage on it. Thanks for Watching!
Follow us on Instagram --- httpswww.instagram.com_nikobrothers_
TikTok - NikoBrothers_Rebuild
httpswww.instagram.com_nikobrothers_
httpswww.facebook.comTheNikoBros
1003 Main St Wellford SC 29385 PO BOX 501
Merch Shop - nikobrothers.com
#_nikobrothers_ - Навчання та стиль
What I particularly like about you guys, as well as your faith, is that I always know I am going to see something achieved in your video's - not just a talkfest. Well done.
Excellent work Ivan. I can see how your confidence grows every time you do one of these projects. Keep up the good work and see you on the next one.
Great video, Didn't see much frame pulling at all, seems it was outside damage. it looked like the side was really pushed in, but I guess the quarter took all the damage. Really made this look easy.
I noticed you struggling on drilling Out the new 1/4 panel, I’d suggest getting a drill doctor and touching up the bits every time you use it. Or bulk buy bits. I’ve learned the hard way that a sharp, correctly sharpened bit makes your job so much easier. You guys are good at what you do. 👍🏼
Hoping you keep the car original black color. Instead of buying additional drill bits buy good american made ones and invest in a good bit sharpener. Glad to see the footwear.Keep up the good work. great content. You guys are a class act. not like those idiots selling sauces.
Impressive work Ivan! You not only knock it out, you have the vision it takes to look at a piece of forgotten boneyard scrap and know you can restore it to near spec and perfection. Again, I'm impressed!
Great and nice job niko brothers the rebuilding the zl1
Doing a great job
Good job Ivan never mind the critics, just keep going, it's going to look soooo... cool... take care thanks 9
Perfect job 👍waiting for finishing ( Kuwait 🇰🇼) 🌹👍
Thanks guys for the masterful 2018 CAMARO ZL1 REBUILD update. Amazing.🥇👍🤟
Keeping your craft on point. 🎉
Looking great so far ...from the 🇬🇧
Looks awesome guys you do great work love seeing you keep them on the road instead of a salvage yards for parts
Very impressive, can't wait to see it side by side with Garfield
Hellcat Michael vs Camaro Ivan for pinks! great work and excellent craftsmanship as usual.
Ivan you are a miracle worker looks dope!! Stay safe.
Looking great Boys - Keep it up 👍👌
Definitely getting it done coming along great lot of work
Bro, you are the body work wizard!
Little by little, your getting there. Surpurb workmanship!!!
Looks great can’t wait to see you get the body work completed Nice job as usual
looking great great guys be back on the road soon
Keep it up... You guys are awesome.
How awesome great job!!!
Your brothers' work is overwhelming! The actual hard work is absolutely different from what you see in the video!
You guys always do great work, but this time you're doing the most amazing and difficult work...!
Amazing Niko brothers!!!💪💪💪
I want to show this video to Japanese automakers and repair shops!👍👍👍
Great work guys. Look forward to seeing it finished
Great job ! With shoes , gloves and safety glasses. Love your chanel .
Well done Ivan.. Looking good
Looks good guys
Another Awesome job guys,Ivan is a true artist
Outstanding, nice work!! I like how yall get those cut up cars, yall make the work look so easy. Nice move to the grinder instead of the drill on those welds that looked like tough work. LOL i got a laugh at 3:40 when that razor disappeared...
Brilliant work guys as usual. Keep the videos coming.
Now THATS how you charge a quarter panel. I know the Niko Brothers had it in them. Awesome work guys.
Looking good 👍🏼👍🏼👍🏼from Victoria Australia 🇦🇺🇦🇺🇦🇺🇦🇺 Stay safe and well guys
Great work keep up those nice cars an trucks
Awesome Work…Good Video…Thanks
You make it look so easy but I know different. I wish you would tell use the price of a new body parts compared to the junkyard part. Watching so many videos of cars being rebuilt has given me the confidence to try one myself. More info on these build's would definitely be useful. And thank you for the video that you do.
As always impressive work, great video.
You guys keep it up they,re going to start calling you Copart Brothers....
Great work guys!
You guy are knocking it out fab video thank 👍🇬🇧👍🥳😎
Can’t wait to see what name you give the Camaro, God bless you guys 👍
Greetings from Medellín Colombia
Good afternoon guys, you make it look so easy. I am sure it isn't. Steve from N.B Canada
Thinking your a few miles from me in NB
Nice progress, jou have done a lot of work on it.
Love your work, all the way from Tijuana Mexico big fan of you guys
Dream of some of your builds hope some day have the nice cars
Thanks for the dreams
Nice video guys keep up the good work
Atta boy Ivan great job 👍.yea the way they glue things now is tough not to cause a little damage.but all you can do is to keep it at a minimum.that foam is planned obsolescence as far as I am concerned.it holds and traps moisture in between panels and causes rust and rot.cant sell cars and or parts if they last forever...we live in a throw away society....just buy a new one they say.kep up the great work and putting Jack the hack in check.. 😂..lol 👌👍✌️🇺🇲🇺🇸
Great job Ivan, looking good
You guys are the most talented group that I watch in here, you get through builds quickly no fluff, keep up the good work.
Looking good guys
Outstanding job Ivan! It won't be long and the ZL1 will back to prowling the streets! As always I am looking forward to the next video!
You guys ROCK!!!!
One day you guys will learn and buy a good spot weld cutter... takes half the time and leaves a perfect hole for plug welding. If you center them right, they pop apart with no chisel.
Killing in gents 👍
Top job done looking good boys
I am a retired adjuster & if I am correct the entire uniside & inner structure is boron hardened steel & I don’t think there are any sectioning process recommended by GM, so even though it my look right when completed it may not be structural proper. My want to check to see if there are sectioning procedures that are now available. I have been out of the industry for 11 yrs, good luck.
Looking good!
Looking good thanks
so cool how you did it yourself cars coming out nicee !
Is looking good.
Take 2, Quarter panel better fit no gap.....!
Не бита не крашена. Скоро на Авито..
Nice job so far can't wait to see more 😅🤣😂
Looks good can’t wait to see it race the cat!
Good Job
Nice job 💪
Jus brilliant 🙏🙏👍👍
great job ! You finaly changed the entire quarter panel! Little tip: next time, put a blanket on the door too, the sparks sticks to glass...
This one got a thumbs up from me, much better job than the Hellcat. Keep up the good work guys 👍GB.
Looking good…
Amazing!
Hey man love your style a keep going can't wait till you post your next video keep up the great work cheers man ovaa
Thanks
Nice job
I hope y’all keep this one. You should try this on the ground. We wait to show off of. I love that Camaro beautiful Camaro hard to find these days so pretty
Great work 👍
I love watching you guys. Keeps me motivated! (The harder I work, the luckier I get 😉)
I wondered why you used the square foam hand sanding block to sand the ding repairs on the door instead of the orbital? I know you have the skills and finesse to obviously use one. Did you run out of the correct size grit orbital disc papers perhaps?
Great work guys as always. All the very best!
Cheers 🍻
Some times it's easier that way lol thanks for the support
@@NikoBrothers
I understand. Sometimes if we rush a little with the orbital we can easily end up a little “under” and have to fill again.
Once again, love your work. Thanks for taking the time to make and post your great vids. I really get a lot out of them. I buy, restore, sell earth moving equipement. “You make your money when you buy it, not when you sell”. All the very best guys,
Cheers from Oz 👍👍🍻
Looking Good
Looking Good 😎👍🏾
Excellent craftsmanship as always guys !
Can't wait to see the camaro and challenger finished ! 🙌 🙏 great video ! Take care guys !
Yes sir looks just like OME 😉
What is Isaac about? My book is a good person. Thank you very much for saving Camaros.
🇦🇺nice work guys
Hi Guys watching your rebuilds here in Cairns Australia,I’m impressed with your rebuilds, will be watching in the future.🚙😎🍺🇦🇺
The inner 'B' pillar may be made of Boreon ( not sure of spelling), that is very tough for obvious reasons. It doesn't usually deform but nothing is impossible. Ivan, why not invest in a spot welder? I know you can't use it on all areas but it's a concentrated weld with no splatter. Looking good so far though. 👌 Thanks Brothers. 👍
Not on a camaro.... HIghend car maybe
GREAT WORK!! Was wondering how much do you think a body shop would approximately charger in labor to do this work ( before paint) ...
Kool
Nice!!
Great job as usual, did you use glue around the gas tank out of interest?
😎👍🏼👍🏼👍🏼💯
Holy 💩 Ivan wasn’t wearing his OSHA approved Steel-toe Sandals 🤣🤣🤣
I’ve done this job before, it is very difficult to get those gaps lined up as well as you did. Nice job!
Hi nice job
Dont use ordinary household extension cords. use more heavy duty cords. Your drill will work better.
Great job guys. Just wondering if you learned how to do all these body repair 👨🔧 skills by doing it or you were formally trained? Take care and I look forward to the next video. By for now.
Spot weld drills only take out the top skin and leave the second skin intact.....more expensive I suppose, but self centering so less deformation. Just wondered why you don't use them?.
Me too? They are accurate also.
Hope you do away with that deck lid wing
Ivan, if you're using regular bit try using cobalt drill bits (American). You'll find they last much better!
bro this one nice car
These last two builds are both really interesting and iconic cars! Well chosen boys 👍👍👍
🇧🇷