I recently did this to my 2010 LX. I got all the components for the stereo at Crutchfield and the speakers from Amazon. I was pleasantly surprised how easy it was.
Thank you for the support and kind words! There are a lot more videos on the way. A speaker upgrade is coming up next, then a subwoofer, and then more after that... 😁
Possibly. If your stock sound system is the basic version (vs. a premium factory sound system), then the wiring should be identical. However, I only have access to USDM wiring diagrams, so I do not know if there are any differences between the U.S. version and Australian version.
I have a lot of mod videos to edit & upload. Speakers, compact subwoofer, carbon fiber gauge pod & gauges, suspension upgrades, clutch & flywheel, etc. Plus, I'll be converting the rear drum brakes to disc brakes this weekend (with lots of polyurethane bushings & extra improvements). There is a lot to share 😁. Thanks for the support!
@@LevelUpMechanics that sounds great! I'm actually getting into Audio so tomorrow I'll be setting up new speakers. Hope to see that content coming soon
, just watching your video brother and how your car came out. I have the same model,, definitely give me good ideas. Thanks a lot....also the installation for the new system. I think I'd rather have someone professional. To do it. I think I mess up 😂😂😂
Thanks! I appreciate the support! There are a lot more upgrades coming this year for the Honda Civic (including a Skunk2 camshaft & Kraftwerks supercharger for the R18 engine)... I still have a long ways to go before this Civic is finished 😁.
If you check the community section on my channel, I just shared a picture of the main electrical connector pin layout for you. Hopefully, this is what you are looking for (I'm assuming you have the factory basic stereo sound system and NOT the factory PREMIUM sound system). I hope this helps! 😁👍
I haven't really experienced any visibility issues. I'm very happy with the visual performance 😁👍. The screen is definitely bright enough for daytime viewing, and it has a matte finish to help cut down on any glare from direct light. Overall, I really enjoy this head unit. It performs well, and it looks great 😁👍.
Yes, but you would have to purchase an additional component (I believe it's called an iDatalink Maestro Interface Module). Adding this additional item would allow you to retain your steering wheel controls.
I really thought about it. In the end, though, I've seen so many posts where people eventually have issues with these "low-cost, Chinese-manufactured" tablet-style stereo systems that I decided it would be best to go with a "name brand" product that has a long reputation of quality. The Sony XAV-AX4000 doesn't look as "high-tech" as the tablet-style head units, but I really enjoy the simplicity that mine offers. So far, I have had ZERO issues, and I am happy with the wireless capabilities that this Sony unit has to offer. If I were to take a risk on a tablet-style head unit, I would definitely try the iDoing brand, as I hear the most positive-related reviews from this brand.
I have a 2006 lx as well but have failed to have any sounds from my speakers in 2 years. I’m stumped so there’s not any amplifier? The only speaker working is my front tweeter for the doors and ignition. I put a dual touch screen in it. I find it weird that none of the other speakers are working at all. What’s the chance of them all going at once ?
The chances of all 4 speakers going out at the exact same time are pretty slim. It is more likely that something that controls all your speakers is the problem (like a blown fuse or your touch screen radio).
Hi! I have a question. I have fuses in the interior that are not working, I thought a replacement would fix the issue but apparently its a wiring issue. Can you help me with guidance on how to repair?
If you have a particular fuse that keeps blowing, there are multiple possibilities as to why the fuse keeps blowing. For example, if you try to power multiple electronic accessories from one power outlet (usually rated around 15-20 amps), you could be overloading the circuit (drawing over 20 amps) and cause the fuse to blow. Other scenarios include a short-to-ground circuit, a short-to-power circuit, loose battery cables or ground wires, a wrong type of fuse (there are various types / sizes of fuses - micro, mini, etc), and so on... If I had a fuse that kept blowing every time I replaced it, I would suspect that there might be a short-to-ground issue in the circuit. I would figure out what electrical items are used for that fuse (in an owners manual, for example), and then I would look up a wiring diagram for those electrical item(s) and start testing / inspecting different parts of the circuit (usually somewhere after the fuse). I hope this info helps! 😁 I wish I could be a bit more specific. There are a lot of UA-cam videos that show how you can test a circuit to diagnose an electrical issue... sometimes it can be an easy fix.
I blew out a fuse last time on my civic tryna connect an amp to the car and since then my stereo hasn’t been working I bought this stereo to but hasn’t turned on either any clue what it is? bc I can’t find anything I replace the strep fuse and all other fusses look good to
Honestly, I have no idea as to what it could be. If you can read wiring diagrams and test electrical circuits, then I would suggest trying to figure out why your stereo unit isn't getting power. Otherwise, you may need to have a professional technician diagnose the stereo system. Unfortunately, there isn't much I can do over the internet to help figure out the problem.
What would you recommend for the CSX model? It came with a touchscreen display with subwoofer and Navigation. And I would like to have apple car play aswell
The Sony XAV-AX4000 or XAV-AX6000 should be good options to choose from. Just keep in mind that you would also need to purchase an iDatalink Maestro kit in order to keep your factory steering wheel controls (which would cost extra $$$).
@@LevelUpMechanics both look amazing. Unfortunately, slightly out of the budget , is there any models possibly in the 2-300 range ?. Or should I just save up for one of those models ?
@Student2024.4 You could always look into any of the Chinese "tablet style" stereo units that are floating around on Amazon / Ebay. They usually have wireless Apple CarPlay / Android Auto options & are usually compatible with your factory sound system components... the only downside is that the Chinese brands can be hit or miss (as far as quality). I actually have one of these tablet-style head units in my Toyota Tacoma, and I have not experienced any issues so far. Plus, they are more affordable than "name brand" stereos. 😁👍
I did not. I use android auto, which doesn't require the GPS antenna. If you use wireless Apple CarPlay, then you will need to plug in the GPS antenna and then just place the antenna somewhere on a horizontal surface.
Yes, it would work for the Si as well. The only difference would be the wiring. You would need to pick up a wire harness adapter that is compatible with your premium factory sound system. I believe you would need to use the Metra 70-1730 Receiver Wiring Harness and the Metra 40-HD11 Antenna Adapter... If you need more info, I would highly suggest checking Crutchfield's website. They do a really good job at showing everything you would need to make this Sony receiver compatible for your civic. www.crutchfield.com/
Yes, but you would have to purchase an additional component (I believe it's called an iDatalink Maestro Interface Module). Adding this additional item would allow you to retain your steering wheel controls.
It's a definite improvement over the stock head unit, that's for sure 😁👍. Pairing this head unit with some decent speakers is really nice, as far as the sound / "loudness" is concerned. I am very happy with the performance of the full sound system that I installed in my civic. Nothing crazy... no external amplifiers or anything... just simple... and performs well 👍.
@@LevelUpMechanics awesome thank you for your quick response I was contemplating on whether I would need an amp or not. My stock system was way too quiet
I will be finishing the video on the gauges soon (I'm just waiting on one more gauge pod to arrive to finish the project). Currently, I have the XVRACING carbon fiber gauge pod with 2 ProSport JDM Series 52mm gauges installed. Here are the links: xvracing.com/product-category/honda-civic-fg2-fa5/ prosportgauges.com/collections/jdm-series I hope this info helps! 😁👍
I would say yes since the Acura CSX is the Canadian version of the Honda Civic. If your CSX includes factory steering wheel audio controls, then you will probably need an iDatalink Maestro RR Interface Module to make the head unit work with the steering wheel controls. It's basically the same thing needed for Honda Civics here in the US that have steering wheel audio controls. I hope this info helps! 😁👍
Unfortunately, it's not on this head unit. The ones you're referring to are the android tablet-style head units. I use the hondata app on my phone, so I don't necessarily need it on the head unit. But I do think it would be fun / convenient to have the app on the head unit 😁👍.
My car did not have a factory subwoofer. The wiring will be almost identical, but you will have a factory external amplifier to account for. I would recommend that you find a youtube video that includes a factory amplifier. You will benefit from that info a lot better 😁👍.
I have not experienced any abnormal static noise issues with this setup. Everything sounds great! So far, I am very happy with the performance of all of my stereo upgrades 😁👍
They are ProSport JDM 52mm (2-1/16") gauges. I'm currently running an oil pressure gauge and a wideband AFR gauge. prosportgauges.com/collections/jdm-series I hope this helps! 😁👍
Anyone have an issue with the speakers staying on hearing the speakers on while no music playing. I know it’s the amplifier staying on but I color matched everything and it stays on
If your factory sound system has an amplifier, then I believe there is one specific wire that you need to pay attention to (I think it may be a blue wire 🤔). Unfortunately, I don't have the exact answer since my factory sound system does not have an amplifier... however, I would recommend searching youtube because I know I've seen the answer you're looking for in the past.
Soldering the wires together provides the best connection, for sure. But for the video, I just crimped the wires together (between the Sony harness and the plug-n-play harness I purchased on Amazon). I haven't had any issues to date. 😁👍
@mrmcguffle3345 you should strip a little bit of the end of the wires when you are crimping wires together (the same goes when you are soldering wires together) 👍.
You have to purchase an "iDatalink Maestro" kit separately to integrate the steering wheel controls with the stereo. I think it's like an extra $100 ish...
my sony head unit comes with a Steering Wheel Remote Cable mode RC-SR1. are you familiar with that and how to connect it? it a very simple looking piece. 3 wires and an aux jack@@LevelUpMechanics
I recently did this to my 2010 LX. I got all the components for the stereo at Crutchfield and the speakers from Amazon. I was pleasantly surprised how easy it was.
Nice 👊 👍. It's definitely a major improvement, for sure!
You're such a blessing with these videos! I have a 2010 and these help alot to upgrade my car thanks Chris!
Thank you for the support and kind words! There are a lot more videos on the way. A speaker upgrade is coming up next, then a subwoofer, and then more after that... 😁
Nice install, gotta have Apple CarPlay these days!
Agreed 👍. Definitely a "must have" item 😁
Love your videos Chris. The install looks amazing and clean.
Thanks! I appreciate the support! I have a lot more civic content coming soon 😁.
Really clean head unit and install. 🤛
🔥🔥 Hell yeah, man! Thanks 👊👍.
LEGIT, you’re Awesome.
this is all I need for my civic FD hybrid 2008.
will do this project soon.
Thanks! I appreciate the support! 😁👍
Hi Chris,
I got Civic FD Hybrid 2008 Australia.
does all the wiring is same with the one you put on the description?
Possibly. If your stock sound system is the basic version (vs. a premium factory sound system), then the wiring should be identical.
However, I only have access to USDM wiring diagrams, so I do not know if there are any differences between the U.S. version and Australian version.
I hope to see more of this videos, I also have a civic LX and i'm modding it
I have a lot of mod videos to edit & upload. Speakers, compact subwoofer, carbon fiber gauge pod & gauges, suspension upgrades, clutch & flywheel, etc.
Plus, I'll be converting the rear drum brakes to disc brakes this weekend (with lots of polyurethane bushings & extra improvements). There is a lot to share 😁.
Thanks for the support!
@@LevelUpMechanics that sounds great! I'm actually getting into Audio so tomorrow I'll be setting up new speakers.
Hope to see that content coming soon
My speaker video is up next and will be out in a couple of days 😁👍. Just gotta finish editing the video 🤣
, just watching your video brother and how your car came out. I have the same model,, definitely give me good ideas. Thanks a lot....also the installation for the new system. I think I'd rather have someone professional. To do it. I think I mess up 😂😂😂
Thanks! I appreciate the support! There are a lot more upgrades coming this year for the Honda Civic (including a Skunk2 camshaft & Kraftwerks supercharger for the R18 engine)...
I still have a long ways to go before this Civic is finished 😁.
Awesome 😎
Thanks 👊👍
hey great video appreciate it just subbed can you share the honda connector wiring diagram please?
If you check the community section on my channel, I just shared a picture of the main electrical connector pin layout for you. Hopefully, this is what you are looking for (I'm assuming you have the factory basic stereo sound system and NOT the factory PREMIUM sound system).
I hope this helps! 😁👍
@@LevelUpMechanicsthank you very much ❤❤
@@LevelUpMechanicsperfect
hello, did you find it?@@Panjtoori
How is the screen on this? I've heard from folks that in direct sunlight its hard to see. Is that your experience?
I haven't really experienced any visibility issues. I'm very happy with the visual performance 😁👍.
The screen is definitely bright enough for daytime viewing, and it has a matte finish to help cut down on any glare from direct light.
Overall, I really enjoy this head unit. It performs well, and it looks great 😁👍.
Do your steering wheel volume buttons still work?
Yes, but you would have to purchase an additional component (I believe it's called an iDatalink Maestro Interface Module).
Adding this additional item would allow you to retain your steering wheel controls.
Surprused you didn't install the idoing stereo. Everyone seems to like those.
I really thought about it. In the end, though, I've seen so many posts where people eventually have issues with these "low-cost, Chinese-manufactured" tablet-style stereo systems that I decided it would be best to go with a "name brand" product that has a long reputation of quality.
The Sony XAV-AX4000 doesn't look as "high-tech" as the tablet-style head units, but I really enjoy the simplicity that mine offers.
So far, I have had ZERO issues, and I am happy with the wireless capabilities that this Sony unit has to offer.
If I were to take a risk on a tablet-style head unit, I would definitely try the iDoing brand, as I hear the most positive-related reviews from this brand.
@LevelUpMechanics The Sony ain't cheap. So safe to say it's quality. Definitely checking it out
hi, great video.
can you share link of that shift knob and boot please?
If you go to my shifter upgrades video, you'll find all the links you need in the description section 😁.
ua-cam.com/video/1Gq9vk7wnTs/v-deo.html
I have a 2006 lx as well but have failed to have any sounds from my speakers in 2 years. I’m stumped so there’s not any amplifier? The only speaker working is my front tweeter for the doors and ignition. I put a dual touch screen in it. I find it weird that none of the other speakers are working at all. What’s the chance of them all going at once ?
The chances of all 4 speakers going out at the exact same time are pretty slim. It is more likely that something that controls all your speakers is the problem (like a blown fuse or your touch screen radio).
Hi! I have a question. I have fuses in the interior that are not working, I thought a replacement would fix the issue but apparently its a wiring issue. Can you help me with guidance on how to repair?
If you have a particular fuse that keeps blowing, there are multiple possibilities as to why the fuse keeps blowing.
For example, if you try to power multiple electronic accessories from one power outlet (usually rated around 15-20 amps), you could be overloading the circuit (drawing over 20 amps) and cause the fuse to blow.
Other scenarios include a short-to-ground circuit, a short-to-power circuit, loose battery cables or ground wires, a wrong type of fuse (there are various types / sizes of fuses - micro, mini, etc), and so on...
If I had a fuse that kept blowing every time I replaced it, I would suspect that there might be a short-to-ground issue in the circuit.
I would figure out what electrical items are used for that fuse (in an owners manual, for example), and then I would look up a wiring diagram for those electrical item(s) and start testing / inspecting different parts of the circuit (usually somewhere after the fuse).
I hope this info helps! 😁 I wish I could be a bit more specific. There are a lot of UA-cam videos that show how you can test a circuit to diagnose an electrical issue... sometimes it can be an easy fix.
I blew out a fuse last time on my civic tryna connect an amp to the car and since then my stereo hasn’t been working I bought this stereo to but hasn’t turned on either any clue what it is? bc I can’t find anything I replace the strep fuse and all other fusses look good to
Honestly, I have no idea as to what it could be. If you can read wiring diagrams and test electrical circuits, then I would suggest trying to figure out why your stereo unit isn't getting power.
Otherwise, you may need to have a professional technician diagnose the stereo system.
Unfortunately, there isn't much I can do over the internet to help figure out the problem.
What would you recommend for the CSX model?
It came with a touchscreen display with subwoofer and Navigation. And I would like to have apple car play aswell
The Sony XAV-AX4000 or XAV-AX6000 should be good options to choose from. Just keep in mind that you would also need to purchase an iDatalink Maestro kit in order to keep your factory steering wheel controls (which would cost extra $$$).
@@LevelUpMechanics both look amazing. Unfortunately, slightly out of the budget , is there any models possibly in the 2-300 range ?. Or should I just save up for one of those models ?
@Student2024.4 You could always look into any of the Chinese "tablet style" stereo units that are floating around on Amazon / Ebay.
They usually have wireless Apple CarPlay / Android Auto options & are usually compatible with your factory sound system components... the only downside is that the Chinese brands can be hit or miss (as far as quality).
I actually have one of these tablet-style head units in my Toyota Tacoma, and I have not experienced any issues so far. Plus, they are more affordable than "name brand" stereos. 😁👍
Did you install the GPS antenna? If so, where?
I did not. I use android auto, which doesn't require the GPS antenna.
If you use wireless Apple CarPlay, then you will need to plug in the GPS antenna and then just place the antenna somewhere on a horizontal surface.
Hi, for steering wheel, is that default one or you change it? Cheers
It's the default steering wheel (with an aftermarket red "H" emblem) 😁👍.
Nice video…. Would it work for a civic Si 07 too?
Yes, it would work for the Si as well. The only difference would be the wiring. You would need to pick up a wire harness adapter that is compatible with your premium factory sound system.
I believe you would need to use the Metra 70-1730 Receiver Wiring Harness and the Metra 40-HD11 Antenna Adapter...
If you need more info, I would highly suggest checking Crutchfield's website. They do a really good job at showing everything you would need to make this Sony receiver compatible for your civic.
www.crutchfield.com/
@@LevelUpMechanics great. Thank you so much for the prompt response. I’d take a look at the site too.
Does this retain your steering wheel volume controls?
Yes, but you would have to purchase an additional component (I believe it's called an iDatalink Maestro Interface Module).
Adding this additional item would allow you to retain your steering wheel controls.
I looked up for that, it can be + $90 bucks@@LevelUpMechanics
@IARDM27 that sounds about right.
@@IARDM27 I suppose I can live without it then
how is the power and sound over stock? I have an older 2013 toyota base model and am curious how much louder it will be.
It's a definite improvement over the stock head unit, that's for sure 😁👍. Pairing this head unit with some decent speakers is really nice, as far as the sound / "loudness" is concerned.
I am very happy with the performance of the full sound system that I installed in my civic.
Nothing crazy... no external amplifiers or anything... just simple... and performs well 👍.
@@LevelUpMechanics awesome thank you for your quick response I was contemplating on whether I would need an amp or not. My stock system was way too quiet
What kind of gauges do u have by the steering wheel? And do u have a video on the installation?
I will be finishing the video on the gauges soon (I'm just waiting on one more gauge pod to arrive to finish the project).
Currently, I have the XVRACING carbon fiber gauge pod with 2 ProSport JDM Series 52mm gauges installed. Here are the links:
xvracing.com/product-category/honda-civic-fg2-fa5/
prosportgauges.com/collections/jdm-series
I hope this info helps! 😁👍
@@LevelUpMechanics thank u so much
Anytime 👊 👍
What about for a 2012 civic LX? Is there a different schosche harness I would need?
Here ya go. This one should be compatible for a 2012 Honda Civic LX - amzn.to/3t6AH74
Thank you!
@GaryHenderson-xm1qw no problem 👍. Anytime! 😁
Can I upgrade my 8th gen civic (07 lx) to an 8th gen (hybrid) Navigation unit?
I mean, you could... but I don't think it would be cost-effective to do so.
@LevelUpMechanics I have the Navi radio head unit already, just wasn't sure if the installation would be that much of a hassle
@Nessamor I'm not 100% sure that it would be "plug and play." The wiring layout for the radio connectors may be different, if I remember correctly.
Is it compatible with a csx?
I would say yes since the Acura CSX is the Canadian version of the Honda Civic.
If your CSX includes factory steering wheel audio controls, then you will probably need an iDatalink Maestro RR Interface Module to make the head unit work with the steering wheel controls. It's basically the same thing needed for Honda Civics here in the US that have steering wheel audio controls.
I hope this info helps! 😁👍
can you get hondata on the headunit? i know some head units can do that.
Unfortunately, it's not on this head unit. The ones you're referring to are the android tablet-style head units.
I use the hondata app on my phone, so I don't necessarily need it on the head unit. But I do think it would be fun / convenient to have the app on the head unit 😁👍.
thank you sir, thats exactly what i was looking for
@@LevelUpMechanics
Did your car stereo have a subwoofer? I am swapping out my car stereo to a Sony XAVAX3250. Wondering if the same wiring harness should work for this?
My car did not have a factory subwoofer. The wiring will be almost identical, but you will have a factory external amplifier to account for.
I would recommend that you find a youtube video that includes a factory amplifier. You will benefit from that info a lot better 😁👍.
Do you find any static noise issues with this set up?
I have not experienced any abnormal static noise issues with this setup. Everything sounds great!
So far, I am very happy with the performance of all of my stereo upgrades 😁👍
Hi, can you let me know the brand of your gauges and type (OP, Battery ir Bost?
Thanks
They are ProSport JDM 52mm (2-1/16") gauges. I'm currently running an oil pressure gauge and a wideband AFR gauge.
prosportgauges.com/collections/jdm-series
I hope this helps! 😁👍
@@LevelUpMechanics Thanks you so much!
You delete the Check Light (O2 secondary sensor) with a Hondata?
Thanks again!
No problem 👍. Yes, I disabled the secondary o2 sensor with Hondata to keep the check engine light from setting a code for the catalytic converter.
@@LevelUpMechanics Thanks a lot!
Hope to see more videos about 8th Honda civic. New sub!
That's awesome! Thank you for the support! I have a lot more content coming soon for the Civic 😁👍
Anyone have an issue with the speakers staying on hearing the speakers on while no music playing. I know it’s the amplifier staying on but I color matched everything and it stays on
If your factory sound system has an amplifier, then I believe there is one specific wire that you need to pay attention to (I think it may be a blue wire 🤔).
Unfortunately, I don't have the exact answer since my factory sound system does not have an amplifier... however, I would recommend searching youtube because I know I've seen the answer you're looking for in the past.
If I want to use a FM/DAB splitter for the original antenna, which needs 12v, would i need to hook it onto the red wire?
Honestly, I don't remember... it's been a while since I made this video.
@@LevelUpMechanics 🤨
Did you solder the wires together? I’m Tryna go for the same setup as this but I’m new to this
Soldering the wires together provides the best connection, for sure. But for the video, I just crimped the wires together (between the Sony harness and the plug-n-play harness I purchased on Amazon).
I haven't had any issues to date. 😁👍
@@LevelUpMechanicsthank you sir 👍🏻 appreciate the help
@mrmcguffle3345 anytime 👊👍
@@LevelUpMechanics should I also strip a little bit of the wire as well or is it good to crimp as is? Sorry if I’m asking too much
@mrmcguffle3345 you should strip a little bit of the end of the wires when you are crimping wires together (the same goes when you are soldering wires together) 👍.
how did you hook up steering wheel control?
You have to purchase an "iDatalink Maestro" kit separately to integrate the steering wheel controls with the stereo. I think it's like an extra $100 ish...
my sony head unit comes with a Steering Wheel Remote Cable mode RC-SR1. are you familiar with that and how to connect it? it a very simple looking piece. 3 wires and an aux jack@@LevelUpMechanics
no volume or tunning knob very sad
This seems to be the price of technology these days 🤣