5 important tools that are not taught in school, creative ideas for every job
Вставка
- Опубліковано 21 кві 2024
- #lathe #creative #tools
5 important tools that are not taught in school, creative ideas for every job
These are some of the lathes' creativity in making tools that can be used in every job.
Rarely does anyone know about this lathe technique and tools
Lathe
Lathe technique
Restoration
Making tools
Creative ideas
Welding
Welding for beginner
Machining job
Making gears
Making barrel rifling
Thank you for visiting, don't forget to like and subscribe for support, thank you
always genius , and werry god teacher
Thanks 👍
Крайне не советую расточную головку эксцентрикового типа. Недостатков у неё уйма. Но самое главное это склонность к резкому и мгновенному заклиниванию с печальными последствиями!
Cool work thanks 👍
Thanks 👍
Идея с резцом понравилась.
GOOD.WORK
Thanks👍👍
Nice video, thanks :)
Thanks 🙏👍👍
Good working ❤❤
Thanks 👍
MASHA.ALLAH.TBARAK.ALLAH
🙏👍👍👍
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
😄👍👍👍
Yes 👍🆗
🙏👍👍
A useful way to recycle steel bolts.
🙏👍👍
The Oil Groove Maker could probably do double duty as a Barrel Rifling Maker. All you need is the right Attachments.
Thank you for the advice, 👍
@@KULITEKNIK001 I believe you have made 1 before, but this beautiful Hardware you have made would probably do a better job of Rifling Barrels than the 1 you already made.
@@OleDirtyMacSanchez Thank you very much I will try it next time, thank you for giving the best idea 👍👍👍
@@KULITEKNIK001 Any ideas on my Steel Rod problem.
Fantastic ideas out of waste . .
Thanks
We're intelligent but too poor to aquare the tools and materials for different inovatio
Do you have what would be needed to drill all the way through a 28 Inch long by 3 Inch thick Steel Rod, or a 32 to 38 Inch long by 3 Inch thick Steel Rod? If not, what would be needed to do so?
Sorry my friend doesn't have that
@@KULITEKNIK001 No, I was wondering if YOU had what was needed to drill through Steel Rods of that length? Or if YOU knew what was needed to drill through Steel Rods of that length. I got a bunch of Steel Rods for a bunch of Air Rifles I'm fixing and Performance Modding and I know a 12 Inch Bit or 20 Inch Bit isn't going to get the job done right. Having to drill through 1 half of the Steel Rod, flip it around and drill through the other half can lead to off centered, and I need it to be straight. Plus, I've been through 4 bits, and expense is adding up.
@@OleDirtyMacSanchez In the past I have tried modifying the drill bit with a long attachment, but it vibrates easily and the drilling shifts a little from the center point, but it is still a straight line.
@@KULITEKNIK001 Would it be good enough for a Precision High Velocity Air Rifle? That's what 1 of the 6 is going to be made into. Also looking around to get custom Air Valves made. 3 Feet long and 4 Inches in width. On paper an Air Valve that size has a huge potential power output. Which is why I designed it to be that large, and already has all the After Market power gain features built into the design. Plan is to use 2 to 4 of them together in unison to blast a Pellet or Slug downrange.
@@OleDirtyMacSanchezanneal the part you want to drill. Use a center drill to start bore. You will need to support work with a steady rest. Grind and sharpen the appropriate sized drill rod to drill bore, retracting frequently to clear chips. This is how rifle and cannon bores were drilled for centuries. Final bore size can be drilled or reamed before rifling.
123...
Istimiwir
Mantap
😄👍👍
😄👍👍
😄👍👍
Ridiculous nonsense