My battery went dead and I tried to jump start my bike from my truck… if I put a lot of power to the bike I get a loud buzzing sound… less power the fuel pump thumps away but the starter does not crank…. Is this the symptom of me needing to do this? I also have a 2006 ZX10. Thanks
That’s usally a bad but if u press the button and just here a click and nothing else u can tap the starter and sometimes it will start again so try that .
Same year, after recharged the battery i can get a crank but doesn't start, lights flicker, ordered new battery but thinking to clean the starter mean time, I also jumstarted from the car back in days, also left bike on for cooling via fans, bad call. Hopefully new battery will solve the issue if not I am ready to replace whole solenoid, stoter, rectifier
I just had that same problem you definitely fried your relay Box under the sea on top of the CDI Grab a one of them from eBay that'll stop thatAnd then we gotta fix the rest of the issue hopefully what this guy just showed us cause I've been through the whole damn bike damn near Except the starter
U will need a pack of metric Allen wrenches up to 6mm , socket set up to 13mm , all the cover bolts are 8mm the starter is like a 5.5 or 6mm and( a 8mm ratchet wrench ) optional but very useful . Also u can use take or a pick set to hold the starter brushes in while u slide the commutator in between the brushes so the don’t spring outwards
@@brickmanracing I feel ya I’m right there with you lol but this video helped me with my zx10 I didn’t pull the starter just pulled the guts to get to the brush new one will be here soon ! Thanks for the video man helped me a lot
Thank you so much ! 2024 still helping
Thanks a lot man saved me some cash
Awesome, thanks bro
From watching the video of the weak non start I'm guessing this is my problem I'm chasing too and you just saved my life I'll let you know soon
Hope it worked
MAKE A VIDEO ON YOUR ZX10R!!! this thing looks DOPE
Robzilla Garage thanks man I have vid of me running it in my channel will have vid of all 3 of my bikes running everything this year
Great video bro
Helped alot thank you
Your video was very helpful to me. Thank you sir!!!!!!
Any time
If I have a bad stater motor will it cause the bike not to get any power to the cluster?
What year zx10r is this
You don't need to flush the oil before taking the starter cover off right? It doesn't seem like much get in there
Il mio motorino d avviamento è in corto... Cosa si può fare? Grazie 🙏
is that failure making horrible marbels bag noise? wehen the bike is at idle or high rpms?
No it whines when started or didn’t start at all
If the noise is close to the starter I’d check the clutch basket
You didn’t link the part ???
My battery went dead and I tried to jump start my bike from my truck… if I put a lot of power to the bike I get a loud buzzing sound… less power the fuel pump thumps away but the starter does not crank…. Is this the symptom of me needing to do this? I also have a 2006 ZX10. Thanks
That’s usally a bad but if u press the button and just here a click and nothing else u can tap the starter and sometimes it will start again so try that .
Same year, after recharged the battery i can get a crank but doesn't start, lights flicker, ordered new battery but thinking to clean the starter mean time, I also jumstarted from the car back in days, also left bike on for cooling via fans, bad call. Hopefully new battery will solve the issue if not I am ready to replace whole solenoid, stoter, rectifier
I just had that same problem you definitely fried your relay Box under the sea on top of the CDI Grab a one of them from eBay that'll stop thatAnd then we gotta fix the rest of the issue hopefully what this guy just showed us cause I've been through the whole damn bike damn near Except the starter
Do you happen to know the part number for the brushes?
I will try and look them up for u
www.ebay.com/itm/371609356068
Here is a link to a kit on eBay I’ll try and get part number also but if not this is exactly what u need and will work
Thank you so much 🙏🏾
The one part we are all here to see you did not show. What tools you used to install the starter motor.
U will need a pack of metric Allen wrenches up to 6mm , socket set up to 13mm , all the cover bolts are 8mm the starter is like a 5.5 or 6mm and( a 8mm ratchet wrench ) optional but very useful . Also u can use take or a pick set to hold the starter brushes in while u slide the commutator in between the brushes so the don’t spring outwards
Where is the link to the part I can't seem to find anything In the description
www.ebay.com/itm/371609356068
Hope this helps
😄
You said to remove the clutch cable I don't think you did that lol
I did just a long time ago lol
And there is one under the top cover pmsl
so my 3 followers will know what to do lol
It’s sad but true lol
@@brickmanracing I feel ya I’m right there with you lol but this video helped me with my zx10 I didn’t pull the starter just pulled the guts to get to the brush new one will be here soon ! Thanks for the video man helped me a lot
Yeah man sun if u can and good luck with the rebuild should save u big $$$
@@thatquickcivic1421 Brilliant!