Incredible!!! Just bought my first Ruckus and itching to rebuild the engine. When I'm ready I'll be subscribing to your DIY video Library. Keep up the great work!!!!!!
I tried to find a video on the break in process too. Some people like a hard and fast break in as opposed to what the factory suggests. I didn't find one from Rolling Wrench.
I have a piston that has no markings for intake /exhaust, There is no measurable differences in the depth to even verify. Intake and exhaust are the same machinings. could it be that it doesn't matter? being it is a Sunday I cannot contact the manufacturer so I was taking a gamble to see if you read this.
My TaoTao VIP Future Champion is an 82cc and it’s made by Peace Sports I got it used from someone so I’m not sure if it came that wayI keep up on changing the oil the person who owned it before me said it came all stock but if it did come at 82cc as the stock engine how many miles can I get out of it I use the best oil I can get for it I use 15w-50 Mobil 1 engine oil and it is advanced fully synthetic motor oil I also get nervous about pushing it as hard as I can because my old moped I ended up throwing a rod threw the engine block mainly because it was a cheap $900.00 moped and I had put 30,000 miles on it and it finally had enough and blew up. I really don’t want anything bad to happen to my TaoTao VIP Future Champion is there a way to make it so it lasts longer than 30,000 miles? This moped is my only way to and from work it is my main source of transportation it has a GY6 engine on it but again I don’t push my moped as hard as I can unless I am in a really big rush and by then it’s all the way warmed up I also give it 10 minutes to warm up.
My piston is labeled just like your. If I put the IN marks on intake side, it makes them say NI when installed with marking on the top. Is this normal?
Incredible!!! Just bought my first Ruckus and itching to rebuild the engine. When I'm ready I'll be subscribing to your DIY video Library. Keep up the great work!!!!!!
Great video as always. Recently got the 80cc big bore kit from you. Loving the performance gain.
It's a good job and understandable Thank you very much you made it easy for us.
Great!
What’s your thoughts on
-first startup/ heat cycle, and
-breaking in the rings?
I tried to find a video on the break in process too. Some people like a hard and fast break in as opposed to what the factory suggests. I didn't find one from Rolling Wrench.
Loving the content bro u explain it so well !
Can i set this for80cc gy6?
can we use this mothod for all 4 stroke bikes ?
Thank you sir, very help full.
I just joined I love your.videosyou go into such detail I hope to see a live stream soon
Thanks Todd! It was nice chatting with you in the live. I appreciate the support 🖤💯🙏🏻
Thank you for all the useful information by any chance do you have any information on degreeing the camshaft
for GY6 engines
Hi! Bore size gap 0,006 mm? or in? this is for the water-cooled engine? Thanks
Hey man loving the content I’m a newbie to UA-cam you explain it so well man keep them videos rolling in !!!!
Good explanation
Will that pistion ring set u made work for a 105cc gy6 big bore qmb can I set the rings just like your on there
I have a piston that has no markings for intake /exhaust, There is no measurable differences in the depth to even verify. Intake and exhaust are the same machinings. could it be that it doesn't matter? being it is a Sunday I cannot contact the manufacturer so I was taking a gamble to see if you read this.
1:38 it’s taken me ages to find that out. Thank you SO £UCKEN MUCH 😂
I'm learning about them to literally be able to continue my engine design lol
My TaoTao VIP Future Champion is an 82cc and it’s made by Peace Sports I got it used from someone so I’m not sure if it came that wayI keep up on changing the oil the person who owned it before me said it came all stock but if it did come at 82cc as the stock engine how many miles can I get out of it I use the best oil I can get for it I use 15w-50 Mobil 1 engine oil and it is advanced fully synthetic motor oil I also get nervous about pushing it as hard as I can because my old moped I ended up throwing a rod threw the engine block mainly because it was a cheap $900.00 moped and I had put 30,000 miles on it and it finally had enough and blew up. I really don’t want anything bad to happen to my TaoTao VIP Future Champion is there a way to make it so it lasts longer than 30,000 miles? This moped is my only way to and from work it is my main source of transportation it has a GY6 engine on it but again I don’t push my moped as hard as I can unless I am in a really big rush and by then it’s all the way warmed up I also give it 10 minutes to warm up.
Is the black ring always the second ring
what engine oil is best for 171cc gy6?
My piston is labeled just like your. If I put the IN marks on intake side, it makes them say NI when installed with marking on the top. Is this normal?
Can u just access the piston from the cylinder head or u have to totally open the motor??
You have to remove the cylinder head and the jug
Another video has the expander ring gap lined up with the wrist pin hole
고마워! 너의 영상이 도움 많이되었다
나도 시도해볼께!
Hi IAM wondering if your big bore kits fit yiying 125cc
As long as it’s a qmi152
Trying to get my hands on a Honda Ruckus trike 50cc
Fajny filmik
Very good
is there a way i can contact you? i need help with my 50 cc
i rebuilt it so many times ,i mean so many and rightnow im having electric start problems and throttle response issues
is the same for the car
Please build spree
emanuals does not have my bike manual..
👍🏾
1:38 it’s taken me ages to find that out. Thank you SO £UCKEN MUCH 😂