Wooo rare I see an agu build at all never mind over the other side of the globe remember doing all this to mine when I got it the injector cups weep sometimes easy replacement healthy amount of grease in and fanny's your aunt iv got 660 cc in mine with a F21T K04
Omg I have been looking for someone doing this to their car for so long im looking to do the same just missing the injectors but here in my country no one will tune my car because of the "old" ecu on the agu engine, how did you get the tune? Did you do it yourself or? I cant even get a stock tune from my car or the one i have in it currently its making about 220 at the crank, had it flashed but didnt get any file went to a place that did it, i should mention im running a k04 as well, if you could help me where i can get tuning files i would very much appreciate it, thank you!
Hi which country are you from? I got my tune file from the UK and flashed it on my car myself. The guy can be contacted from Instagram @tuningtechnics. He tunes K04 a well.
@@ajrveedub Thank you so much! I am from portugal, so everyone here refuses to actually tune the car, just flash a file they already have and call it a day and those files of course are for a stock car, subbed to your channel as well, good videos!
@@omegapr12 if you can flash the tune yourself definitely speak to technic tuning from instagram. He's been very helpful. He is a busy person though haha just gotta be patient.
Hi mate, i have bought a hybrid turbo for my gti, you could upload a video of programming a tune for our 1.8t, or how to make a tune, you know, staff like that. It would be quite interesting!
@@cm3593 unfortunately my intercooler didn't make it to me. Shipping got screwed up, so it's sent back to the supplier... I've ordered a other one fingers crossed it makes it!😂
Hi there I used Bosch injectors from Saab 9-3 and 9000 which are turbo engines. They are 360cc. Part number 0280150431. I also installed the 3 inch MAF housing from a mk3 vr6. Both of these items need a tune after installing immediately. You cannot drive without a tune.
You need a tune after you install it, but yes I did feel a difference as I had a new tune for it running 23-24 psi peak. Previous power levels were at 225hp according to MAF readings so should be a little bit higher than that.
Wooo rare I see an agu build at all never mind over the other side of the globe remember doing all this to mine when I got it the injector cups weep sometimes easy replacement healthy amount of grease in and fanny's your aunt iv got 660 cc in mine with a F21T K04
Hey there! Haha, it's been a great journey so far!
Which 660cc injectors are you running? Are you still using the agu ecu?
Did your iam play up when you put air filter on
@@FrankWank-l8g ICM was fine but I bought a spare one just in case. These are the weak point of the AGU ignition system.
@@ajrveedub can you remove it that's the sensor on the air box
@@ajrveedubwhy don’t you delete the icm?
Just subscribed after watching some of your vids , out of curiosity how are you remapping/tunning your ecu with a laptop?
Hey there! check out my video on flashing a tune using mpps cable :)
Hi mate you got a link to them injectors? Or a part number? Cheers
Oh yeah forgot to add that!
Here it is!
0280150431
Omg I have been looking for someone doing this to their car for so long im looking to do the same just missing the injectors but here in my country no one will tune my car because of the "old" ecu on the agu engine, how did you get the tune? Did you do it yourself or? I cant even get a stock tune from my car or the one i have in it currently its making about 220 at the crank, had it flashed but didnt get any file went to a place that did it, i should mention im running a k04 as well, if you could help me where i can get tuning files i would very much appreciate it, thank you!
Hi which country are you from?
I got my tune file from the UK and flashed it on my car myself.
The guy can be contacted from Instagram @tuningtechnics.
He tunes K04 a well.
@@ajrveedub Thank you so much! I am from portugal, so everyone here refuses to actually tune the car, just flash a file they already have and call it a day and those files of course are for a stock car, subbed to your channel as well, good videos!
@@omegapr12 if you can flash the tune yourself definitely speak to technic tuning from instagram. He's been very helpful. He is a busy person though haha just gotta be patient.
@@ajrveedub Yes that is what I'll be doing, really appreciate the help thanks!
Cześć widać że masz inne zegary usuneleś imobilajzer A gdzie on jest w zegarkach czy w komputerze
Immobilizer had to be configured for light to not turn on
What is part number of injector
0280150431 make sure it's genuine
Hello, what is the part number of that maf? I also have a agu and am waiting for the k04 turbo😄
The housing you need is:
0280217504
Which program do you use to change ecu parameters , only vcds?
MPPS cable and program comes with it. Check out my flashing ecu video 😉
Hi mate, i have bought a hybrid turbo for my gti, you could upload a video of programming a tune for our 1.8t, or how to make a tune, you know, staff like that. It would be quite interesting!
Will do! Ill make a video for flashing on our cars, great idea.
@@ajrveedub 👌👌
What software you using on your laptop
MPPS Cable. Check out my video on flashing the ECU. :)
what’s the benefit for bigger maf housing?
You need it to flow more air, also the stock agu MAF maxes out it's airflow reading at 187g/s.
@@ajrveedub i’m having issue with my 3” maf housing at 4500rpm after 4500rpm car goes lean… now upgrading to bigger 4” maf housing to fix it
@@ajrveedub trying to reach under 327 g/s with 4” maf housing
so i can get to max 6800 rpm without going lean
Nice
love your car mate :) what the full setup of it?
is running ko3s my self with some mods
Mate that a great question . Since I'm coming up to the end of mods with the car I'm going to make a video of a list of mods I've done so far 😁
@@ajrveedub sounds good man 😁👍
Nice video, I got an eBay tip was it difficult connecting the 80mm maf housing on to the tip??? Only curious as I’m doing this mod pretty soon…
Yes it was an absolute pain in the back side haha. Lots of swearing but got it on with flat head screw drivers going around it.
@@ajrveedub haha no worries thanks for the heads up!! How’s that intercooler video coming along, looking forward to it?
@@cm3593 unfortunately my intercooler didn't make it to me. Shipping got screwed up, so it's sent back to the supplier... I've ordered a other one fingers crossed it makes it!😂
why dont you do me7.5swap
Yeah could go down that route but I have acccess to m3.8.3 tunes still so why not use it
what exatctly injectors you used i have the same engine 1.8t agu with k04-001 turbo and im looking for injectors for around like 250-300hp
Hi there I used Bosch injectors from Saab 9-3 and 9000 which are turbo engines. They are 360cc.
Part number 0280150431.
I also installed the 3 inch MAF housing from a mk3 vr6.
Both of these items need a tune after installing immediately. You cannot drive without a tune.
@@ajrveedub why, is it dangerous to drive with 3" maf with a 2.75" tune?
@@marioaragones the MAF calculates how much fuel goes in so yeah, it could be dangerous if tuning is not done properly.
How do you flash the car
Hey man! Check out my video on how to flash your car :)
Hallo bro the software
@@vanystuart551 software came with the cable. MPPS version 13 I believe
Ow okee
I will check it online
Hallo bro injector part numbera
0280150431 make sure genuine
Where did you bought it
@@vanystuart551 bought it from my local Saab wreckers in Melbourne Australia.
I got them cleaned.
Hoe manny hp you have know
Did u feel the difference after installing
You need a tune after you install it, but yes I did feel a difference as I had a new tune for it running 23-24 psi peak.
Previous power levels were at 225hp according to MAF readings so should be a little bit higher than that.
Nice