Ducati Superleggera | Panigale V4 conversion COMPLETE!
Вставка
- Опубліковано 15 жов 2024
- Welcome back to the channel. If this is your first time joining, check out my channels other videos and see the transformation unfold. I started with my 2018 Ducati Panigale V4 and converted it to a Replica of the Superleggera V4 model. I've installed a number of parts as well as performing Ducati services such as tune-up and fluid changes during this build. I finally put all the parts together and was able to take it out for its unveiling. I hope you all enjoy the video.
If anyone is interested in more info or PURCHASING this bike. Contact me.
Thanks
Wow, it's really come well together. Such a beaut and probably cost way less than the actual Superleggera
Thank you. Definitely cost less than the Superleggera ($100k). There are still some key differences between the two bikes, but at first glance, it is hard to notice. I'm just around $22k in upgrades on this project already. I purchased the bike for $17k. I'm happy with the results. 👍
@MotoGarageTV wow, that's way less than I thought it would be in total. It's 40k in total so far but your bike looks absolutely beautiful
Damn couldn’t even tell that wasn’t a real superlegg. Had to read the title twice. Very impressive build!
Thank you. I really appreciate that.
What a great build! You did a great job and should be proud of your work. I think of all the ppl on UA-cam I would only allow Dado or you to work on my Panigale. Truly inspiring!
That means a lot. I appreciate that! Thank you
WOOOOOW man ! I'm at 15 seconds of the video and it's so nice to see it complete like that finally, really looks like the real one ! Good to see also that you finally found the superleggera seat, looks so much better with it ! So proud of you and of all that process that you went trough, while keeping us uptaded everytime, now time to enjoy the fruit of you hard work !👊🔥🔥
Ok i watched the video and now that i heard you say it it's true that the seat isnt really the same color as the bike, but i think it's the vulturbike's carenage kit that is not exactly the same red as the superleggera (wich is quite different from the red of panigale, normally it's a bit more orange like the one of the seat). I cant really see on the video, is the red on the carenage you bought the same red as the one you had before on the panigale ?
Otherwise i dont know if it's possible but it would be cool to know the weight after all the modifications you done, i'm really intrigued to know how close the weight came down to the one of the real superleggera
Thanks, you're right. it's time to enjoy. I'll bring you guys along for the ride.
It's an authentic Superleggera seat. I purchased from a guy who swapped his out. That took a while to find. I tried Vulturbike, but they told me they didn't have any, and they were no longer available. I was about to get a seat cover but got lucky when i came across the one i found. It's red like the bike, just looked a little orange on the phones camera. Looks better in person, but to me, stands out a little more than I would like.
I was thinking of having it weighed and just comparing to stock weight specs since I didn't weigh anything during the process. I'll look into that and let you know.
Beautiful build! love it ! great job!
THANKS! I appreciate that.
I’ve been looking for a conversion kit from 2018 converting to a 2020+ thank you for this video!
You're welcome. Just make sure you don't forget to purchase the bracket when you convert fairing styles from 18 to 2020+. Glad it help
Could you please drop the link for those brackets, thank you bro!
It is a nice twist to it, beautiful i went the matte carbon way with mine 🔥
Thanks. Yeah, the matte looks amazing. I wanted to do something a little different. I like the way the gloss looks in the sunlight.
Yessssssss this is what I’ve been waiting for
Thanks! Glad you liked it! 👍
Great build sir. I love the result ✌🏿
Much appreciated
Looks amazing well done
Thank you!
Looks amazing!!
I can't believe ur videos don't get more views Amazing content !!
I'm glad you like them! Maybe some day, we'll see. Thank you
Hey i was hoping to do the same to my paigale v4s and was wondering if i could get a list of parts/instructions. Thx. Ps loved the series
Engine:
- Fresh tune-up Motul 300v oil, Ducati Oil Filter, NGK Spark Plugs, Sprint air filter
- Flushed radiator with Engine-Ice fluid,
- EVO-TECH Radiator guards
- TITANIUM Arrow exhausts w/UpMap Device installed
- FULLSIX Carbon Fiber Exhaust covers
- Ducati Spacers Heat shield kit
Hydraulics:
- Brembo T- Drive front Rotors
- New rear BRAKING brand Wave Rotor
- EBC HH sintered brakes pads
- Fren Tubo Carbon fiber Brake lines and Clutch lines
- Oberon Clutch Slave (red)
- Ducabike clear clutch cover
- Ducabike Clutch Plate and Pressure ring
- Stahlbus bleeder Valves on every brake and clutch component
- Moto Corse Billet Brake and Clutch Reservoirs made for Brembo Corsa Corta cylinders
- Brembo Corsa Corta RCS19 Brake Master Cylinder
- Brembo Corsa Corta RCS15 Clutch Master Cylinder
- Brembo Racing PS13 Rear Master Cylinder w/ Integrated Reservoir
- Fresh Motul 660 brake fluid in all lines
- Fully Rebuilt Brembo Calipers Front and Rear (Seals and Pistons)
- Ducabike Red Caliper Spacers
Wheels:
- BST RapidTek Carbon Fiber Rims with World Wide Ceramic Bearings
- Brand New Superleggera Pirelli SuperCorsa SP Tires (less than 5 miles)
- TITANIUM Black front axle
- DucaBike front and rear axle nuts
Drive:
- 520 Superlite chain conversion kit
- Red Sprocket Carrier w/Driven-Racing Sprocket Nuts(red)
- Black Polyurethane Cush Set
- SuperLite Black Anodized Flange Cover
- 520 EK ZVX3 Metallic Red chain
- New Ducati Rear Eccentric Hub
- Fully Adjustable Rearsets w/GP Shift
Suspension/ Handlebars:
- OHLINS FGRT 214 BLACK SERIES Forks
- Black Titanium axle pinch bolts
- OHLINS DU 468 Hypersport TTX GP rear shock
- Dukabike Red Steering Head Nut
- Duckabike GP Edition Upper Triple Clamp
- Fulcrume Design Titanium and Carbon Fiber Bar ends with lever guards
- JetPrime Street Version Left Switch set
- JetPrime Right Switch Run + Gas and DPL
- Ohlins Superleggera Steering Damper
Electronics:
- Rizoma Turn signal relocation set
- Fulcrume Design Carbon Fiber Tail Tidy w/ License Plate Holder (Tucked or Un-tucked)
- UpMap Device Installed with custom Map (stock available as well)
- Dash screen protector installed
Body:
- COMPLETE FULLSIX SUPERLEGGERA CARBON FIBER FAIRING KIT
- OEM SUPERLEGGERA seat
- Ducati extra tall Windscreen
- TWM QUICK ACTION Carbon Fiber gas cap
- FullSix Carbon Fiber Parts - Front Fender, Rear Fender, Side Frame Covers, SubFrame Covers, Swingarm Cover, Exhaust Heat Shield, Timing Cover, Top Tank Cover, Tank Bottom Cover, Sprocket Cover, Superleggera Winglet set, Ignition Switch Cover, Fairing Stay, Heel Guard Set, 3 piece Instrument Cluster Cover set
- Aella Racing Tow down hooks (passenger peg delete)
- Ducabike Red accent piece - Engine Oil Cap
- Moto Corse Red Billet Cover Plate for Rear brake lines
Hey man love your videos! I also have a 2018 V4. Question for you, I’m trying to upgrade to newer side fairings with the vents. Can I keep the original front fairing, or do I have to get a newer year front fairing?
Bike looks incredible! Great job
I'm not 100% certain, I know the newer fairings are wider than the stock 18' and the front fairing connects to the side panel. I would say it does not work. I know the front windscreen doesn't fit, and the newer body style has a wider screen, so with that info, I would say you need a new one.
Good meeting you bro. Join is sometime during a midnight club meet.
Same here. That would be awesome. When you have a minute, send me info when the next meet is.
Hey Jason, do you have any info on the next bike meet? Let me know when you get a chance. Thanks
Awesome bike man 👍. I wished to own one of those but in my country that costs like a million ringgit.
I was just wondering if it would work on the v4r 2023 and if it'll have the same feeling before and after the conversion. Another thing, is it okay for them to service the bike after the change?
Thanks, I appreciate it. As far as the 23 v4r, I'm sure it would work. The bike feels totally different after the lighter parts, suspension, exhaust, and brake upgrades. Very noticeable changes.
Great job 😊
Thanks!
hi man ! the bike is great! can you tell me what fairing kit you used and is it possible to install it on 2022 v4s ??? can you give me the contacts of the manufacturer of this fairing ???
If you check out my other videos, I believe I have the link in the description.
But Vulturbike.com is where I purchased. They are out of Italy and they work with Ducati, and FULLSIX.
Yes it should work with the 2022
Super nice, what rear sets?
Arashi 2.0 ..... Testing these ones out. So far, so good. I was impressed with the quality. Thick, billet CNC rearsets with well put together hardware. I'm waiting to pull the trigger on 700 dollar set of Rizoma's. I'll update if I do.
yo, would this work on a v2 also or only the V4?
I'm not sure. The website should say if they are compatible or not.
Hello! Hello! It can be done without spacer kit fairing? It's obligatory to mount? Thank you
Hello, technically, you can still mount the fairing to the bike without the space kit. However, you will not have all points of contact secured, and that could cause problems.
I know this is old does anyone have the link to the website to get the conversion kit?
vulturbike.com/en/1914-carbon-fiber-fairings-superleggera-restyling-kit-ducati-panigale-v4-v4r-v4s.html
How did you put on the winglets did you make the holes you’re self for the down wings ?
v4evo.com provided a template with the wing set.