a critical software update is required for your mac
Вставка
- Опубліковано 23 лют 2020
- 📺Subscribe To My Channel and Get More Great Tips / @bluekap
*****Main Problem is Logic Board ( Motherboard).
Download Link
Mac users have recently begun to run into an issue that prevents them from using MacOS effectively: When they try to turn their Macs on, they get a message that says, “A critical software update is required for your Mac, but an error was encountered while installing this update,” with an additional note that warns, “Your Mac can’t be used until this update is installed.”
It`s temporary solution only. 👍
👉 for the 100 % Best solution : kindly replace the Logic Board ( Motherboard ) not SSD.
firstly check your laptop warranty because this model come with 3 Years warranty .
Wow replace logic board? Mine is 2016 so..... I'm to late
I just now clicked on DELETE button before wifi shown up or when it says 2min, it worked.
you must work for apple. I did that swap once already for $1,500. Your car's water pump will be fixed is you buy a new engine! Find a board-level repair shop
This is great i’ve been having this problem on and off again for a couple weeks and no one could get it to work thank you so much
Dude, thank you very much. I have been dealing with this issue for 3 days. I really appreciate you making this video.
Thank you, sir. I spent 30 min on the phone with Apple support and reloaded Catalina and it didn’t work. Then I followed your instructions and am back up and running again. Bless you!
This really works!!!!! Wish I had known this last time as I went to Apple Support and spent three whole days trying to restore from backup 😖
Thank you so much! Ours crashed while updating during a lightning storm and internet failure.
Thanks man! So helpful, now i can take a backup at least
dude..you are amazing..struggling with this for 2 days..saved my time
This method work for me. Thank you so much!!
Dude, for this issue i tryed to go to Apple service also , they said board issue and came bak to home and checked with your video its worked thanks you buddy and i subscrabe your channal and thank you a lot man
Such a shame! While my Mac has been completely restored at an Apple store in January, since 3 months, I can’t use it without being connected to the power, close the screen or carry it closed while on sleep. It panics and restarts. But today it just doesn’t want to restart and give me the exact sam ESCEN a-t-il you described. I restarted on safe mode before seeing your video, made some cleaning with clean my Mac, hoping it will restart normally but it doesn’t unless I’m in safe mode. That’s really a shame
Removing type c hub helped me
[MY SOLUTION: 10.14 -> 10.15]
I tried all solutions online none of which worked for me. My solution was to make a USB installer of Catalina 10.15 (the oldest Catalina) and reinstall the system with it. My older system was Mojave 10.14. A genius bar guy told me the problem came from the incompatibility between hardware and OS.
So by installing the older Catalina which the touch bar did not even exist on it's not going to check for touch bar firmware correct?
tried and didn't work of me , still "A critical software update is required for your Mac" after a long starting and loading
Not all hero's wear capes.... Thanks man sorted it out first time!
Yes problem came back again but at least I was able to log back in
I ran first aid in recovery mode, i thought that worked to fix my issue but...... The next day i went to restart and no luck, i found the issue. I had failed to update monterey os. I was having more issues and could not start up in recovery mode to run disc utility but the disc was not the issue. I managed to startup with left shift held down after several attempts then i managed to go to about this mac, software update (app store was not working) then i ignored the recommended os and clicked on show more updates, then i found the missing update for monterey, this took around 30 mins and a few restarts, which it seemed to do on it's own. I was scared as my monitor was working and sometimes updates do not allow the use of the external monitor. Anyway. Finally this worked. no more error showing in startup disc in disc utility first aid when clicking on the top disc option.
Thanks you, that method works .... 🙌🏾🙌🏾
Viejo me acabas de salvar. Muchas gracias
God bless you man. You saved me big time with this.
The main issue with the logic board (motherboard) in a Mac is that it can get damaged due to factors like wear and tear, dust, dirt, and liquid damage. To resolve logic board issues, thorough testing and delicate repairs are often required. In some cases, a logic board replacement may be necessary, which can be a costly repair.
you are a life saver... thank you so so mixh
Thank you. This also worked for me. Question...You didn't actually say to renew the DHCP license. I just followed what you did in the video. Was it the DHCP license renewal that fixed the problem, or just logging in in safe mode to verify that the wi-fi was indeed connected? Just curious 😀 Thanks again.
Thankk youuuuuuu sooooo much. My laptop is set up now been having this issue for 3 days thanks so much
@Blue Kap have you connected the mac to ethernet adapter?
You are data saver, are you a miracle or what ?
Thanks
Thank you so much for this 😊
Worked! Thanks
If you have anything connected via USB-C, like an external monitor, unplug that and reboot again. My monitor was causing this issue.
Absolutely fantastic!!!!!!! Thx
Thanks a lot! It works!
Thank you sooooo much I just moved to college and I thought my computer broke
THANKS SO MUCH bro
Works perfectly. You the man!
Thank you so much
Still same problem. I tried many things. Any other advise ?
Thanks a lot my friend this worked good👍👍👍
Guys I fixed it, i just clicked on DELETE button when it says 2min or before this wifi window pops up and i got login prompt, i logged in again and it worked.
Didn't the problem happen to you again after that? Because my macbook also works after connecting to wifi and starting 2 minutes. but after 15 minutes it restarts again.
Hello! I tried to press and hold the left shift key but the apple logo doesn’t appear :( anyone can help please?.?
Thank you
ME ACABAS DE SALVARRRRR! GRACIAS!!!!
Thank so much, bro.
Thank you! Is there a way to just disable the touch bar or go to a previous OS where the touch bar did not even exist?
I might have a solution to all of this,
What you do is before installing Mac os, go into disk utility and make a 2 gigabyte ms dos FAT partition, this makes what is called an EFI partition, this partition is what helps Mac os boot , by doing this the installer doesn't have to do it as it can cause an error that is silent.
hope this helps
exactly, have u fixed ur problem?
@@noplsdonthack5593 yeah
Great! Thank you
Why this always happened when updating the OS, any solution?
Solved! thank you
You're my savior. GOD BLESS YOU!! 🙌
Thank you so much!!!!
muchas gracias
What happens when you install the newest version of macos?
Thanks man 👍🏽
Hallelujah. You’re a lifesaver.
I guess I have an issue with the Touch Bar. Can I disable it?
thanks you
awesome content
Bro it worked for me at the beginning then when I restarted it asked me the same thing .. what can I do ? 😢
It works but my whole computer screen like glitches and when I restart my computer I have to do the whole process over again.
Did not work for me either
It doesnt boot up without any error when you dont go into safe. It goes to the update screen and fails again.
Thank you soo much ❤
Not work for me 😞
Bless you man!
I had same issues. First i tried reinstalling OS which did not help. Gave it to Apple. First they simply erased and restored OS which did not help. Then they took it again for "deep scan". A week later they called me and said the problem with touch pad. I ask why it is complaining about updating software than.... They said they can fix it by replacing keyboard, touchpad, and my old battery, all for $250. Sounds weird since in safe mode the touch pad did work..... also price of new battery is about $50 right?
I might have a solution to all of this,
What you do is before installing Mac os, go into disk utility and make a 2 gigabyte ms dos FAT partition, this makes what is called an EFI partition, this partition is what helps Mac os boot , by doing this the installer doesn't have to do it as it can cause an error that is silent.
hope this helps
Thanks, its work
mine still starts with error... :((
NEEED HEEEELP!!
To install a critical software update on a Mac, you need to ensure that your Mac is connected to a network. The error message A critical software update is required for your Mac, but an error was encountered while installing this update indicates that macOS needs to install an important update, such as a bug fix or security patch, before you can continue using your Mac. If you encounter this error, try restarting your Mac and attempting to install the update again. If the issue persists, you may need to perform a factory reset on your Mac to resolve it.
thank youuuu
Didnt work
This does not work after I restart again it goes back no help
Does not work in my MacBook... but it worked fine when I unplugged the Touchbar.
How did you do this?
@@IsraelMeshileya I unplugged the Touchbar from logic board
I read that this error is caused by a failed update for the touch bar...its something that's coming from apple but I want to ask if I unplug the touch bar will I still be able to use touch and power button??
@@lywill6832 the power button is not related to touchbar. It plugs separately.
@@5ingredients127 I will give it a shot tomorrow and see how it goes, I'll keep you all posted
Didn't work for me. Still stuck in Monterey setup..
me too
@@nita_xx4281right
Mine didn’t work
Your a legend
Could anyone help me out with this? Its happening again and again! I tried doing the same but it keeps coming up
Did you fixed?
@@reanitchannel hello bong, it happening on mac now could help?
@@sonitavorm3265 it's easy to fix bro just open with safe mode
and then connect with your wifi. I think this problem occurred because software required to update but can't connect to the wifi.
Could be a problem on the SSD?
Problem is Logic Board.
Problem is touch bar actually
@@lywill6832 Ugh freaking Touch Bar 😭
Didn’t work, same error
2022 fix , internet recovery fixed mine A1706 touchbar
What do you mean? How you fix it? Same model with touchbar I have but that option which on video doesn’t work for me
@@user-uj7yp5kk2v forget about the video, full internet recovery, wipe it
I spilled the water on my keyboard, I got the same problem. Can you kindly suggest me what is wrong with it? Thx i.
It does work!!!!!!! Thank you so much
Didn’t work for me waste of time
** NOTE **
Just want to point out the Firmware password has to be turn OFF when attempting to do this.
You can turn firmware password off by holding Command + R when turning the Mac on.
@@shaz1W sort of. It’s an EXTRA password on the MacBook. It’s toggled on/off in MacOS Recovery.
I might have a solution to all of this,
What you do is before installing Mac os, go into disk utility and make a 2 gigabyte ms dos FAT partition, this makes what is called an EFI partition, this partition is what helps Mac os boot , by doing this the installer doesn't have to do it as it can cause an error that is silent.
hope this helps
Doesn’t work at all man
remove all WiFi connections and restart