EASY WAY To Replace License Plate Bulb Toyota Highlander 2014 - 2019
Вставка
- Опубліковано 15 жов 2024
- Super likes are appreciated 🫡
Link to Bulb: amzn.to/31OGMY7
How to install interior LED lights in Toyota Highlander:
• How to Install Interio...
How to install LED Headlight Toyota Highlander
• How to Install LED Hea...
Contact info trackpalmer876@gmail.com
Disclaimer:
TrackPalmer assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TrackPalmer recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of TrackPalmer, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrackPalmer. Due to factors beyond the control of TrackPalmer, I cannot guarantee against improper use or unauthorized modifications of this information. - Авто та транспорт
Saved me an hour of labor. Worked great. Thank You! Shop wanted $70 to replace this bulb.
Happy the video helped.. Your subscription would be highly appreciated 👍
Lol. I watched the other guy first u see the panel on the floor. Then saw this one. This one! Way better and faster. Thanks bro
Glad I could help
Wow after watching the other guys video removing the hole panel I gave up right away... But then I stumbled up on your video and it was literally like seeing an angel looking down on me... I will try this out tomorrow, thank you so much! 👍🏽
I replaced the light with your method and it worked like a charm. Thank you for saying us all that time my friend! 👍🏽
🫡
I knew there had to be an easy way. Thank you!!
You are welcome. I would appreciate your support with a subscription 👍
Tremendous time, labor, and money saver! Thank you so much
Like and subscribe 👍😎
Thank you. Looked at numerous videos all with same plastic fronts but they either said remove access cover in rear boot lid (ours doesn't have one) or lever here but no description or put a screwdriver in hole and pull but it came off so easily I didn't film it!
As soon as you said put screw in hole and pull I just used long nose pliers in round hole and gently pulled.
Happy it helped. Like.. subscribe 👍😎
I didn't have screw long enough so I tried a pocket knife tip and it worked. Popped right off. Thanks for the idea 💡
🫡
Mil Gracias así lo realize y fué a la perfección si no veo tu vídeo hubiera quitado toda la tapa del interior o de plano llevarla a la agencia y me cobraban 359 pesos mexicanos mil gracias en menos de un minuto lo cambié
feliz de haber ayudado
Doin the good lords work right here. I was not about the take the whole hatch apart. Thanks!
🫡
Hi Thank you for your videos and very useful. But I broke the front main interior light when removing and now cant remove it as it popped in. I managed to change the right side but broke the left n popped in. How can I fix that. Much appreciate for your advice
Not sure what you mean by popped in. If the bulb is broken inside, remove the negative terminal from the batter and use a pointy nose pliers to remove the pieces. Hopefully the broken bulb hasn't already blown the fuse. If so that red 10A fuse under the dash will have to be replaced. But let me know if you are referring to the bulb breaking if so let me know how it goes
Man I'm glad I ran across your video I was about to take down the whole panel 😂 ,thanx a bunch👍
Glad I could help🫡
Wow hahaha I watch the other video first. Good thing I kept looking. Great 👍 video
Happy it helped. Subscribe 👍
Awesome...replaced two in under 5 minutes. Thank you!
🫡
I also have 2015 Toyota Highlander . It would help what size bulbs and brand name you did use ! Cause is there different brands and numbers for Led bulbs I would feel much safer once you open the package is yours store won’t take it back 😖 to much risk.
I a link in the description
Just did this in 5 min. Thanks a lot brother
Glad it helped
Thank you soo much, I watchted the first video and was soo overwhelmed, really appreciate you putting out these Highlander diy videos, THANK YOU!!
I'm happy it helped
It worked for me. Thank you so much!
You're welcome!
Just used your method and it works perfectly. I really appreciate your help buddy.
🫡
Thanks so much! This saved a lot of time and frustration.
Happy to help and I appreciate your generosity 🫡
This legit works. Just did it in 5min
Super 🫡
Thankyou for sharing your video.. great little hack.. I had the job done in minutes
🫡
Dude you're a genius! Thank you so much!
Happy to help!🫡
You sir are a LEGEND Respect
🫡
I love you bro. Like seriously saved me so much time. Thank you.
Subscribe bro 👍👍
The truck worked perfectly. Thank you!
Happy it helped.. like. Share.. subscribe 👍
I got the cover off and the bulb changed but I'm having trouble getting the cover to snap back on. Is there a trick to that?
Check to see if you installing the correct way. Also check of the clip is broken
Each on teach one! It worked! Thanks bredren 👍🏾
Zeen
@@trackpalmer ua-cam.com/video/-Aa1gOsfMgg/v-deo.html
THIS VIDEO IS AWESOME!!
Happy you like
Genius! Saved so much time.👍
Liked and subscribed.
🫡
Thank you for making this video!
My pleasure!🫡
Good idea but a pick works much better and cheaper than the lights. Just remember to have the lights “on” when inserting the new LED bulbs as they only work one way. I’d they don’t work, insert them 180 and they should work.
Do you have a video show how the pick works? One thing to note, those LED lights I bought work both ways.. They are bright but don't give a true white light.
What type of led is it
@@kenoaleblanc678 I used SIRIUSLED 194 LED Bulbs. You can find them on amazon. They work in any direction
Life saver!! Thanks🙌
Happy to help!
Much better way to do this, thank you!
🫡
Worked perfect 👍🏻 thank u
You're welcome!
THANKS 👍 👌 👊
YOU THE MAN 💪
Subscribe guys 👍
Ur was most useful
Happy it helped
Thanks man worked for me
Glad I could help🫡
Thank you it worked for me
Great!🫡
Very nice video format, and thx for the tip
🫡
Thanks 😊 super fast 💨
Welcome 😊
You dont need a screw. There is a notch in the bottom of the plastic bulb cover you can use a flathead screwdriver to pry it off.
Noted🫡
Thank you!
You're welcome!
Amazing I love the idea great technique much appreciate
Happy it helped. Subscribe 👍😎
You are a live saver! Thank you!
Happy to help!
Super helpful! Thank you!
Happy it helped. Like.. subscribe 👍
Thanks 👍very much 😊
Most welcome 😊
Alright! I see you 👀👍🏾😉
You already know🫡
Your a Legend my friend ! Thank u
Glad to help
life saver!!
Happy to help
Nice work
Thank you! Cheers!🫡
Thank you 💪🏻
You're welcome!
What size screw did you use
Q
1 1/2" drywall screw. The skinny type. The important thing is to have a skinny screw with small threads
@@trackpalmer ok cool thanx alot
Bless you.
🫡
You kick ass!
Super 🫡
Bravo!!!! Thank you
🫡
Thank you!
You're welcome!
Good idea sir 🙏
Thanks and welcome
Thank you!!!!!!!
🫡
Thanks
🫡
Thank u i did it
My pleasure
Kick ass
How easy was it for you?
Dammmm!!!
Did you try it?
pull the screw dont?
🫡
💯👍👏
🫡
i dont understand
🫡
My lord !!! 🤣🤣🤣
Like.. share . Subscribe
This is an awesome trick. Thank you a lot!
You're welcome!
Thsnks bro
Welcome🫡