Це відео не доступне.
Перепрошуємо.
I FINALLY Fixed The Yamaha Raptor...This Quad Flies! ( Crazy Top Speed)
Вставка
- Опубліковано 9 вер 2021
- I dig into my 2002 Yamaha Raptor 660 and find a bunch of problems with it. I fix everything and then take it for one last test drive. #Yamaha, #660cc, #FAST,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.c...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Good thing i took off and replaced that clutch cover! It was bad!
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
I'm currently going to school for a career field called nondestructive testing(NDT) and in this school I have learned that gears actually start to develop small almost microscopic cracks along the base of the teeth and due to a lack of lubrication, excessive heat, and/or excessive use these small microscopic cracks get worse and eventually cause the teeth to break off.... I'm sure you can put 2 and 2 together to figure out why exactly those teeth are tore up.... could've been a gnarly backfire too
Yeah this thing was fast but the newer fuel injected 6 speed yfz450 are faster
Love the videos brother!!!
I wish i be a motorcycle and quad mehanic in the future youre the best one out there you allways put a smile on my face keep it up
Good work man. I watched your videos since 2016, its basically because of you that i started my build series.
Your such a smart and humble guy that has taught me alot been watching you for a long time you have come such a long way love seeing all the new subs it's so deserved keep up the awesome work my man 👍
Had one when they first came out stupid fast lots of fun keep an eye on second gear
What an awesome channel! I’m 53 years old and you just brought me back to 16. RM 125. God I miss those days!n subbed!
Dude I just have to say. I had the headlight problem myself with my 660r prices are insane. I was at tractor supply one day and stumbled upon a set of 2 light led lights. 30 bucks and wired them into the factory harness. They look better than stock and light up my whole neighborhood. Super bright. Only thing I had to do was make mounting brackets and use the brackets that came with it. They look good and bright.
with all these toys you have def should consider doing woods riding content would be dope to watch
Bro, that starter cover should have a gasket, the gasket provides the correct distance for clearances for the gears.
The clutch drive gear was likely broken or fractured by someone changing out the clutch using steel on steel instead of gear stopper, and then the teeth likely broke and caused the clutch to bounce, thus breaking the cover support area for the clutch pressure plate release.
Admire your bravery to do internal motor work. watching you work on these bikes is the next best thing to working on my own bikes. Cool!
I love my 05, 660R never had a problem. I took a fall and a hit. Runs like a champ.
Nice job Joe you got one hell of a quad man. You are awesome when it comes to mechanics on your bikes don't let anybody tell you any different. Man it turned out good and God bless you and your family peace out bro.
That piece of grass tho 😂
Idle sounds high maybe u should lower it
I just hard wired the fan on my 660 as the temp sensor was bad. That way the fan is always on when the key is on, quick fail safe. Probably would have been a good ideas to do before the top speed runs. They say alot of raptors don't really get hot or need the fan but I'm not trying to find out.
Y not just get a new temp sensor
It'd have no reason to even have the fan on a top speed run as there's so much air going through radiator the fan actually acts like a obstruction on other side as the air passes through radiator, The onlytime a Raptor even gets hot enough to turn fan on is during very low speed riding and idling, No need to run fan all the time as does absolutely no good as Raptors have thermostats that make them warm up faster, By using a fan at all times has Zero affect on lowering its temperature, That only occurs when entire cooling system is past the thermostats temperature and coolant is at constant flow, Stock temp sensor kicks on the fan just enough to bring temp back down until thermostat opens again, This is how any cooling system functions including old and new vehicles
@@linkinpiatak6669 I guess I didn't really care. It was a cheap bike I paid a grand for. But your right I should have just gotten the sensor.
@@bidenstoletheelection9116 thanks for the info man. Learn something every day. Makes sense.
Thanks for making such a geat vid and balancing the mechanics, narration and test drive so perfect from start to finish.
Great. Yamahas are truly the best all around machines! This one was beat an still seems run well after all you've done. Be sure get the front radiator cover to protect the machine! I run 2 newer Yamaha quads ..'10 YFZ450X & '21 Raptor 700R-SE. Both bought new an mint. Forever quads! Pull machines w/ my trusty Ford trucks. Always Ford 4wd's brotha!
Did you have a typo problem there ? Suppose to say Yamaha are the worst around machines
Did you mean honda instead if yahmaha?
yamahas are not reliable 😂😂😂😂
@@iamdum1808 heck no ..Yamaha over Hyundai! Honda vehicles suck. There off rd stuff is a disaster. Mess!
@@mark2598 yeaaaa an Ford doesn't sell the #1 truck in the world (best one too). Honda dropped ball long time ago. Makes ugly vehicles (Ridgeline!) an no decent ATVs. Go Yamaha or go home.
That's it I'm coming up there to hang out and drink beer and watch you work on this s***
Check out the fan and straighten that nerf bar.
I'm at school right now, but it won't stop me from checking out the latest 2vintage video
Great videos. I have learned so much. I like how you are willing to admit when you're unsure of something. Very humble.
Dude take it from someone who ruined a Kawasaki because I used a Fram oil filter. They are the worst oil filters you can use. They are lacking a real bypass mechanism and if your oil gets a little dirty the filter becomes clogged very easily and the bypass does not open up properly so you end up with oil starvation. Results are a burned up engine or the least burned bearings or worse ruined crankshaft or cam. The damage you have in that engine could have been caused by the oil filters being used on your machine.
Man you're a beast! Tackling this like it was easy!
Great job! You got all the hidden problems fixed on the quad, and looks like it hauls some serious ass now!
Id take the oil pump off as well to see if there's any peace around there use a magnet 🧲 to get tiny stuff
A little bottle Jack could fix that nerf bar
What about the side plastic that has the look of a piece of aluminum that will cut the hell out of u if u was to wreck
No love heart for you 😂
He won't reply unless you tell him how awesome he is.
Good to get those chunks out they could jam up the oil pump
Always happy to see you uploading :)
Looks like a pain in the rear. Definitely not Yamaha's finest machine.
Fantastic series, very interesting information and guidance
I was surprised at the problems you found. But you persevered to the end and now you’ve got one nice 4 wheeler. 👍
thats crazy plastic gears i wouldnt trust that as far as i could throw that quad
That blob of silicone is from previous attempts to stop that leak, likely before the sale.
You can play rough with these but you have to stay on maintenance. Basically, it's a full-blown racebike. Some parts are sensitive to neglect.
I wouldn't have bought a cover I would have taken the cover off drilled it and tapped it and put a helicoil in there it's probably what an 8 millimeter bolt or banjo bolt I would have tapped it and put an 8 millimeter Helicoil in it would have fixed it right up it would have saved you some bucks on a new cover
I don't think the front fenders are oem the grill cover screws on separately
Dang that top speed was surprising! Can't wait to see some comparo vids with your other quads 🤔
Why is there like a brown, type of rust on the exhaust pipes? but it doesn't look like rust so I guess it isn't, anyone know what it is?
It is baked on mud.
Wow those steel clutch plate got really at point before you bought it. That's fast no doubt but I road one that had a turbocharger. It was insane. It was when I worked at Mr Turbo.
Something under the tarp with a jaws bumper on it? hmm wonder what it is
I always wondered what type of bug makes that noise in the background
I wish I had someone who knows bikes like you around here
Hey I’m one of the guys that was there when u bought it I was leaning on the blue one ahead of it and that blue one get to about 90
Awesome video btw that thing is a beast
Can i just ask, why dont you engine brake on your 4 strokes?
Because he doesn't know any better.
That turned out great. You did a nice job on that bike. 80 miles an hour that has got to be the fastest quad you have. Man its a beast. 660 CCs wow its a large motor. WOOOOO for sure. It handles well too. Maybe take the nerf bar off and beat it with a hammer to straighten it out? I think a come along hooked to a tree might pull it out. but you might have to chain it to a truck to keep it from sliding. Maybe just get a used nerf bar and head light. I had no idea it was going to be so fast but it does have the name Raptor.
That's literally the exact same thing I said last video he made on this quad! Lmfao then some clown tried talking smack lol he may end up here too.
Put a stage 3 jet kit in it. Put a after market exhaust to match the carbs.
You'll break the sound barrier.
What is all done to it? If it is fully stock it shouldn’t be doing more then 75. A pipe won’t make it go 4 mph faster. Are the sprockets tweaked with?
I don't believe so! The cam looked stock. Only thing I can think is that maybe it is big bored.
@@2vintage okay ya. Easily could be. 2 of my buddys have 660’s , one is a 04 one is a 05 and the 04 does 74 mph and is fully stock except bars and grips and the 05 does 75 mph with a hmf slip on
2vintage please look at the sprockets and tell us the sizes! That raptor would need at least a 14-40 gear ratio to hit 80mph with just a slip on stock is 13-40.
that thing RIPS!
Interesting how there are fins on the cylinder but also liquid cooled
You need to adjust the camera angle, can't see anything. What are you using for speedometer app? The one I've been using isn't accurate.
Hey do you still have the black Raptor 660? I would really love to it you did a awesome job fixing it. Holler at me if you have it and want to get rid of it. I have a couple project bikes. Hopefully we can do something.
Couldn't you have just used a helicoil on that ?
Most normal people would. But this kid is far from normal. If you want him to read your comment, you have to say how great he is 😂
@@wisecampmotorcycles8258 🤣. Turned out to be a good thing in the end. Was plenty more bad shit that was hiding behind the cover..
And like it or not he is pretty fucking great at working on these old machines 🥴
@@twoends80 yes, I have to agree. He's actually better than me when it comes to gearbox and transmission disassembly. He just needs some better tools, and a work bench.
Another good find. That could’ve been catastrophic
Would you please straighten that bent nerf bar.
Also needs whatever plastic is suppose to be where the zip tie sheet metal is.
Also, nice tool set
For a 660 near on 80mph is really good
Suprised those plastic gears wasn’t smashed to pieces 😮
Yeah me too
Nice work for sure bro!!!
Nice...try 2 get a tri z 250 next
Or even a nice Honda big red..peace
Didn't you replace the rockers on the cam on this quad
You need a raptor 700R
Was that a banshee in the trailer?
Epic series👍👍👍
2vintage what sprocket ratio are you running? The stock gearing is 13-40? Are you running 14-40?
2 good wish you was close by me need ur mechanical skills
Im just wondering what is that speedometer app called
Impressive my stock banshee with pipes only does 74mph!
Famous last words: "Runs fine if you can get it started..."
Good ole Yamaha engineering
Keep it up bro 😎
I have a blue one I’ll ship it out to you serious just paint it black ?
Great job man.
Awesome video
there has to be some yfz headlights laying around for cheep
all u had to do with the thread in the caseing was fit a helicoil kit in it,it would of repaired the thread
Maybe. Was thinking that too but with all the oil pressure maybe not. Good thing he took the case off though. Always wonder if aluminum welding with a mig spool kit can fix a case cover but I think you have to be a seasoned pro welder to fix stuff like that by welding with aluminum.
dude i hate the banjo bolts this happen to my 2000 yz400f a few weeks back
I really appreciate you taking the time to make the repairs on this machine. Sure it had a lot of problems but you're a very capable guy and you did a very thorough job. Good thing you decided to replace that leaking cover or you'd have never saw the damage on that gear ⚙. Great job 👍. Thanks again for your time and videos. I learn something new every time I watch.
Good content here!!!!
Love the videos man 💯
Awesome man
I got a question what website do u us to bye atvs
Hi buddy hope you and your family are well and good, love your videos be cool to see you get a Yamaha grizzly 700 or a can am renegade 1000xxc
Awesome job!
It’s a nice quad now.
U should keep the bearing before you throw it away 😂
I think I saw a banshee in the background
Another great job thanks
nice top hi from CROATIA like the video 👍🔧👌
Man, that's one hung stick man 👨🏿 😳
I'd be searching for where that first chunk of metal came from 👀
Cracking job joe cracking quad it's a flyer mate 👍🔧🔧🔧👌
What causes those various items to crack, break and fail? Is this to do with engine vibration? Poor maintenance? Lots of Hours of Abusive crazy riding, and then long periods of neglect?
And how do so many of these machines end up with no Headlight? How do you destroy a Headlight?
I learned a lot in this one. Never saw so many tiny bits and pieces of metal and Plastic in places no bits should be found.
As you would say, "That's not good".
One time I went and picked up a old snowmobile for free and it had tore seats broken up hood someone
Unexperienced for reason and put lock tite on the spark plugs please explain their stupidity for that and glued the main jet in on it so it broke so I had to use a easy out to get it out
You should definitely reach test and the 110 hp one .
Nice work 💖💖💖👍👍👍👍
Good footage I’m glad you found them issues
I have a drz 125 runs good but won’t idle how can I fix this?
tighten the idle screw while its running and get it to idle
Was that a zilla on the trailer before u covered it up? 🧐🤔