Can you blend automotive clear coat?
Вставка
- Опубліковано 22 сер 2023
- In this episode, I'll share how to blend an automotive clear coat. It's not always a good idea to blend clear coat, but it's a good skill to learn that can simplify a paint repair while saving time and money.
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
SUPER THANKS BUTTON
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
My amazon affiliate store : Tools and materials categorized to help you find what your looking for.
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
Products and tools in this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
finish 1 fc710 spot panel clear
amzn.to/3QumBTV
Aeropro a610
amzn.to/3qMFSru
upol blend #9
amzn.to/3N48p0W
anti static wipes
amzn.to/3lyoAsc
color blender/wet bed
amzn.to/3wHsvI7
800 grit grey scuff pad
amzn.to/3wH4f93
3/4 masking tape
amzn.to/3NuLLiM
1 1/2 inch masking tape
amzn.to/3sNDMFy
Iwata kiwami4
amzn.to/3xs9k7a
Premium Tack Cloths, Bond Crystal Brand 18" x 36" 12 Cloths Per Box
amzn.to/3gfCfAK
automotive plastic sheeting
amzn.to/3yV6gRJ
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
amzn.to/30nRBwV
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Osmo action4
amzn.to/3qMFSru
DJI wireless mic
amzn.to/3E7Qg07
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. - Авто та транспорт
As always, very thorough instructions. No room for confusion. Thank you for sharing your knowledge.
Awesome! I appreciate the comment and. Support!
I typically mix in a little edge blender with some of the clear I sprayed to blend in
Very nice finish with the R500 gun Chris and the blends look spot on, another very well made video with plenty of detailed instructions on what you were doing, loving your videos as the format is IMO spot on👌
I have a Rongpeng R500 with all the different tip sets on order which should be here next week😎👍John UK
I have had to look up words in the dictionary to describe your talent and always realize it’s just as simple as “PROFESSIONAL TECHNICIAN “
Thank's brother!
Nice
Thanks
Great video thanks for all the great tips
You bet!
Thank you so much for this video متشکرم از شما آقای محترم
👍
Another gain one thanks brother
Any time!
Very informative Chris. Thank you!
Appreciate the comment!
Chris, When do you use a clear bed with just binder and reducer and when does one use blend automotive clear coat such as the UPOL Blend 9?
Lovely blend work ! 👌🏽 gotta love it.💯
👍
Great video
Thanks!
Nice great video👌
Thank you 👍
The best channel 👍🏻
Thanks brother!
@@GarageNoise 👍🏻
The R500 is taking off!!
👍🔥
How long to wait before spraying the Upol #9 after applying clear coat? Thanks
Great videos. Now that I have retired, I have some time on my hands to try to fix minor dings in my cars and detail out the scratched etc. What d/a polisher and products do you recommend. I am very much a novice at auto body stuff. will start with my 2013 ford expedition before moving to my 2020 lincoln nautilus and my 2020 Newmar Dutch Star Class A Thx
I have a vevor orbital polisher, harbor freight has a inexpensive one that I have as well. My favorite polish compound is csi none of it's cheap but this is the best. amzn.to/3tooRF4
What do you do if there's a definitive transition after the paint drys? Wetsand the transition line and coumpound?
Depends where it's at I would try to avoid wet sanding a blend but you can. It's just more likely to show the blend line after you buff. If it's in an inconspicuous location than light wet sand lighly buff. If you try to buff it perfect you'll see the blend line.
👏👏👏👏👏
👍
Hi Chris, Another question. The upgrade YT160 spray gun you are using is a upgrade to the R500. I can't find what the upgrades are? Do you know? Just appearance?
It's just appearance update. Sprays the same as the R500
Omg, great video.
You said three turns from close on the paint volume.
My garage would have been full of overspray.
Is that lvlp gun the reason why it's los overspray
Yes for sure, this is the lvlp paint gun helps a ton with less overpray.
@GarageNoise will a larger compressor work with the lvlp gun.
And if I'm clearing an entire car, will it work. I'm telling you I've cleared a car in a garage. The entire garage was full of overspray, even with fans on.
I just have one question do I gap my paper near the blend so it won't leave a hard line.
I perfer to gap it away from the blend but it can be done both ways.
Chris is that 100% isopropyl for cleaning or a mix with water ?
70% isopropyl alcohol
Do you apply it over the existing clear coat so it can bond
I did
How would you blend clearcout if you don’t have the blender/fade out spray?
You don't have to use it. It's just reducer in a can so if you have urethane reducer you can put it in your gun and sray a lite coat over the blend. Or use nothing at all .
@@GarageNoise okay thank you
You make it seem easy.. Then I attempt it and it all blows up in my face. No worries.. We learn from our mistakes!
You just need to get comfortable, relax and follow steps. When things go wrong and they will, it's an opportunity to learn. 👊
What do you think about the gun? Especially compared to the R500 ty
Sprays very well and is every bit as good as the orig R500. The only thing I wishbit had was indicators on fluid and fan adjustment knobs.
Use a file and put some paint in the groove.
Thank you for responding. Appreciate that. The r500 is a lot cheaper. So for the money which would you recommend ty
What was the cost difference
It could be $100 if I don't need to de trim the bumper and remove it, not in this situation because I already had it dismantled.
This video was "a little bit" useful🤣
👍
@@GarageNoise I'm just joking because you've repeated that many times...but I watch all your videos and I like how you explain things...real professional work and very educational to watch!