How To Paint Any Car Like a PRO, Even if You're a NOOB!
Вставка
- Опубліковано 1 січ 2017
- Get A FREE Auto Body & Paint Manual Here: www.learnautobodyandpaint.com/
Read the Blog: How To Paint Your Car Like A Pro Even If You’re A Newbie: www.learnautobodyandpaint.com...
The whole goal of prepping before paint is to take out the imperfections like this orange peel. You want it to get matte looking like how I show you in the video. Remember this is not the final grit. We’ll finish it off with 400-grit before we paint.
It’s always good to have clean parts. I sprayed degreaser, hit it with a brush and wash it off. Check out the video as I show you how I use the wax and grease remover on this part.
For every golf ball size of body filler, put 8 drops of hardener. In this example, I put a little more hardener because I want it to harden quickly so we can get things done fast.
As you can see in the video, we’re spraying a good 2-3 heavy coats of Evercoat filler primer on all of our panels. We’ll also do some dry sanding with the use of our DA Sander. Finally, we’ll cut this down with 400-grit wet sand.
You’ll always want to finish by hand because you can feel all the little imperfections and you’ll see exactly how it comes out once it’s painted.
Here’s the Omni Plus. This is a good base coat and it’s about $100 for a quart of paint. Remember, this base coat is a 1:1 mixture with your reducer.
You don’t have to worry about overspray when you’re doing base coat clear coat. It’s not that bad compared to a single-stage enamel paint job. Single-stage enamel paints are very thick.
You can tack between base coat when it’s dry. But, never tack between clear coat.
When spraying your bumper covers, you need to make sure that you’re getting all the areas. You may have to adjust your nozzle from a wide fan to a narrow fan to get into some of these areas.
A lot of times, you’ll see specks of dots in your clear coat. That’s fine because it’s just atomizing on the panel. You might see little bubbles but it disappears after it flows out onto your panel.
You don’t have to be scared of runs when you’re doing clear coat because you can fix it by color sanding and buffing. The only time you have to worry about it is if you’re spraying pearls or flakes in your clear coat. That’s why I really recommend the newbies to just work with clear coats.
Get your Free New A-Z Guide To DIY Auto Body And Paint Success Manual here: learnautobodyandpaint.com
Looking For Automotive Painting Tools? ⬇️⬇️⬇️ With Great Deals and Discounts
▶️ Spray Paint Gun (ATOM X Series): www.zoolaa.com/
▶️ Spray Gun Light (GUNBUDD): www.zoolaa.com/products/gunbu...
______________________________________________________________________________
Other content:
➡️Get complete auto body and paint DOMINATION and training here: vip1.learnautobodyandpaint.co...
➡️ The R.A.D.S. Paint Formula Video Training: vip1.learnautobodyandpaint.co...
▶️ Learn How To Make Money With E-Commerce: ecomdomination.tonybrichie.com/
▶️ Learn How To Flip Cars For Profits: howtobuyandsellyourcars.com/
▶️ Discover how to make money with crypto: cryptowaters.com
______________________________________________________________________________
More DIY Auto body Videos to Watch:
🚘 The Basics: Auto Body And Paint Your Car Yourself Without Spending $1,000s: • The Basics: Auto Body ...
🚘 Proven DIY BODYWORK Tricks - Easily Body Work & Paint Your Car at Home! Part 2: • Proven DIY BODYWORK Tr...
🚘How To Spray 2k Filler Primer and Apply Glaze Putty Before Single-Stage PAINT!: • How To Spray 2k Filler...
🚘How To SPRAY Raw Plastic, Aluminum, and Steel Car Parts (Single Stage BOSS BLACK):
• How To SPRAY Raw Plast...
______________________________________________________________________________
Social Media Links:
🔗 Connect on Facebook for More FREE Updates: / paradicegarage
🔗 Follow me on Twitter for more Project updates: / thetonyrichie
🔗 Instagram: / tonybrichie
______________________________________________________________________________
Special Training Videos and Guides On How To Build Your Wealth With Cryptocurrency:
🪙 Crypto For Beginners - How To Get Started: cryptowaters.com
🪙 Subscribe To My Crypto UA-cam Channel: / thetonyrichie
#howtopaintacar #paintcar #autobody - Авто та транспорт
When I was 25 yrs old in 1977 I had to learn to paint by using books available at that time. The paints available were lacquer and enamel. I did a total of 3 cars learning as I went along.
I found out the hard way about putting lacquer over enamel without sealing the previous paint or removing it all the way to bare metal. This will come up in your work when you are doing work on cars from the era before the use of clear coats over color.
I am not an auto body man now or then either. I just bought cars that were needing bodywork and got them cheap to sell them later.
I have seen a lot of auto body videos lately and I have not heard anyone say to put more clear on the front of a car so to be able to buff them out in the future without getting into the color. This makes a difference because if you are going to drive it you will be getting scratched and bugs and chipped areas to fix. If you have a very thin clear coat on the car you will be digging into the color a lot of the time making it a bigger problem than a scratch in the clear coat.
Please excuse me if I got any of the words wrong relating to the old type of paints
I, also painted a few cars in the 70s and it was lacquer and enamel. I'm going to jump back in with the new stuff like base and clear coats. I got my glossy shine back in those days with a lot of wet sanding, polishing and buffing.
A pro is someone that can fix his own mistakes with perfect results. You clearly know what you are doing. Respect
I’m doing a paint job on my car. Nobody else works on that car, I do everything on it from engine rebuilding to now paint work. I really enjoyed this video, it addressed a lot of my questions and I appreciate that you don’t ignore the teachable moments when you make mistakes. I’ll be looking for your videos first from here on out when I have auto body questions. Keep up the good work.
Hey Matt, grab your free manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
Hey Tony Tone, you just picked up another subscriber... Thanks for sharing brother. Great job and good instructor
I'm new to doing bodywork and painting, and am finding your videos very informative, Tony. Thanks for sharing your expertise.
you are an EXCELLENT TEACHER of auto body and painting!!! just joined your community. I have been teaching as a certified master mechanic for gas and diesel students for over 20 yrs. I am just learning auto body work now. You have helped me tremendously with this new skill. now I can paint and do bodywork as a green horn. lol. thank you for all you give back to others as I have tried to do the same with mechanics. Great job once again !!!!!
Hey Bobby, I thank you for the awesome feedback. You should start sharing your skill and knowledge on diesel repair here on UA-cam, I'm sure many would love that. I have another program that teaches how to make money by sharing your knowledge on here on UA-cam. Let me know if interested. Please keep me posted with all of your success my friend!
Yeah that was my thought. Hook up with a vocational school for the Blue Cross 😆
I appreciate you showing your mistakes too . Helps me learn . I have a tendency to learn the hard way and I appreciate your honesty, it’s still art to me Tony . I am ENJOYING VIP AND LEARNING TONS . ☺️❤️
I've been doing body work for 25+ years. After watching some of your videos I must say you are skilled sir. Good job helping people wanting to get started.
Thank you Jon.
You sir are the man ! Enjoy your training videos . Great info. Thanks 🙏
I have to admit that I totally enjoy watching your video's! You're so easy to follow and to listen to as well. You take the time to break everything down and explain so many things to us watchers. Thank you so much for sharing your talent!!! I have never painted a car, but I have painted many walls and furniture items, just for myself....but after watching your video's, I swear...if I had the space and the equipment, I think I could do this!!! :)
Yes! you can definitely can! Check out VIP and see how it can help you get started in auto body work and paint: www.learnautobodyandpaint.com/vip-offer/
I'm not even painting my car but you did so well making this video I watched the whole thing. Nice job.
I stopped watching other auto body videos and I'll only watch yours. You explain everything and don't skip steps in the video. Your work is awesome. Thanks Jeff
super happy you put that mistake part in because you will make them. nice video bro.. good job will be watching more videos
hi Tony, here a newbie from Holland. I enjoy, love watching your video's, it helps me alot. I bought a vw golf 3 from 1997 for my daughter and soon when I am confident enough watching more video[s I start the restauration project. thank you
Great job. I've been watching videos . This was the best I've have seen. I have been looking into to fix clear coating on the roof of my car (BMW) . The more i watch,the more i would like to learn how to paint cars.
True professional...very thorough. Always nice to see someone who is knowledgeable about their craft and takes pride in their work.
I haven't painted in over 20yrs but you've inspired me to take it up again, thx!
I don't really know anything about autobody and will probably never paint a car myself, but I like the effort you put in your videos and your honesty especially when it comes to mistakes makes me believe you really know your stuff. Keep teaching the public!
Thanks for the awesome comment LevelUPKev!
It is great that you are taking the time to teach us (amateurs) how to do body work & paint our cars. Thank you.
Great video Tony man Glad you brought up the point about running good information that red color pops keep the videos coming
Great video! I’m very new to learning about Auto body and paint, and this is the best video tutorial I’ve seen! You’ve got a great speaking voice, concise, and very professional! It’s going to take me a while and some hard knocks, but I’m going to join the community and one day paint my dream car! Thanks for the video!
I'm restoring my 64' beetle and I'm almost ready to pain. Your tips make a huge difference! I'm definitely singing up for the VP. Thanks my dude!
You will love it my man Samuel! Can't wait to see you inside!
Dude.. these are great videos... I'm looking to repaint my father's 73 F250, and your tutorials are giving me exactly what I need. Thanks so much!!
Awesome! Best of luck!
I'm a visual learner, so this works great for me. Thanks!
My car is currently being sprayed at a auto shop and I wanted to know what would be involved and so your video helped me to become more aware of what to expect and even an idea of the cost based on mixtures and other materials. Thanks for being honest even when things don't go as planned. Let me know what else a customer might need to know when spraying their car. Thanks again.
super easy to follow. good job throwing in useful tips. you da man
Glad you liked it! You may like this one ua-cam.com/video/fKy9YwfLQ6U/v-deo.html as well...
Awesome work fella. Going to be painting my 22 year old Toyota most likely next year after the garage gets built this summer. This video is now saved.
That was really nice to watch!
You got talent!
Great job 👍👏👌
Awesome vid mate! paint looks slick! 👌💯🔥 Im getting ready to paint my Kawasaki zx11 resto project, so this was exactly what i needed. Cheers! 🍻
my first attempt painting my 08 smart car. you are a fantastic instructor. thanx for being so informative keeping the fingers crossed
Tony! Are you VIP? www.learnautobodyandpaint.com/vip-offer/
Tony thanks for your cool videos man, keep up the good work.
Great video, Thanks! I'll tell you the worst, trying to blend silver metallic after replacing the hood and fender with paint that the paint shop wasn't even close on the color match.
Wow!! You got talent.im in the process of doing my g35 coupe and your vids make me more confident.thus will be my first time spraying anything with a spraygun.thanks for the great video
Check out these awesome Atom Spray guns on Zoolaa now: www.zoolaa.com/.. Don't forget to grab your free manual and start cranking on your own project! learnautobodyandpaint.com/free-autobody-manual
Great vid. Planning on doing some repairs to damaged trunk on my Cherokee and was thinking about doing the body work and prep myself and having a shop do the paint, but watching this vid gives me the confidence to think I'll give it a go myself. Worse case scenario is I screw it up and it looks awful and I take it back to base and give it to a shop. Best case, I learn from guys like you, do a great job and save a bunch of money and get to have pride in a job well done.
Thanks. Yes especially if you end up doing more jobs than one... Well worth learning the skill set!
Tena Koe Tony' Your knowledge and time to give back to people is truly admirable. You've given guys like me who've had to pretty much learn everything on our own through life the hope that there are ways to make something good of yourself with finished projects to be proud of..Thanks a bunch..
Mega Mega Mega Props for documenting this process in the caring detailed ,informative way that you did...Bravo!
Kind Regards,
Optimist Prime
Excellent job you show that even the pros make mistakes with the bondo sometimes and how to remedy it you have a natural talent and great passion
Very informative video man.. looking forward to be included in the vip. Thanks...
Nice. You really made it look simple. Now i feel eager to try it. I have and old motorcycle which fits perfect to practice your techniques! Thank you so much!
Bro this is a very good job and teaching we enjoyed and thanks so much for sharing your experience bro 👊👊
It was so satisfying watching you do the bonnet clear 😅
I know.... type in youtube HOW TO PAINT A CAR, you'll see me spraying the MIATA
Right on buddy! Thanks for the knowledge! You rock!
You are welcome my man! No, YOU ROCK! :)
Best vids hands down. Thanks T. All the way from down under.
Thanks for watching! You are awesome, man!
All your videos are great !
Man your video was awesome. I hate when people do a how to and just show the finished product. You have a new subscriber. Thank you sir
TY for the video. Awesome content and fun presentation. I feel confident to paint my car now.
Thanks, Alex! Don't forget to grab your FREE manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
Very enjoyable watching this. I'm just trying to get better at painting my wheels and stumbled on to your channel. I started with plastidip, moved on to spray paint cans, now i want to get a low budget compressor lol. I'm subscribing too.
That's awesome! Hey, don't forget to grab your free manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual
Hello Tony my bumper was painted 2 weeks ago can I buy a can of clear coat and throw it on top of the new clear or do I have to sand it with 1000 and then add new clear.
I love how thorough you are!!! I know what I'm doing but you still give me tips and tricks cause of the years you have behind that gun!! Your seriously talented but you don't need to be told that!!
Thanks, Michael for the awesome feedback!
I like that you do things realistically. I learned stuff from the one where the guy takes 750 hours to sand a Corvair door, but I'll never spend that much time with a 48" sanding block of 27000 grit sandpaper while standing in a kiddie pool. I like that you rarely get below 400 and use machines for your initial sanding. It gives me hope that I can get this project done.
of course you can get that project done!! Check out VIP and see how it can help you with your car projects! www.learnautobodyandpaint.com/vip-offer/ with over 100 hours of training videos, e-read and bonuses! Definitely one of the most comprehensive courses in auto body work and paint!
hey bro amazing videos, dam u make everything look so easy but I must say it's very encouraging and tempting to try.
Nice work! I’m looking at touching up my Z4M at home. Loads of similar issues so this video is very helpful!
Cool! Check out VIP! www.learnautobodyandpaint.com/vip-offer/
Great job. Good info. Enjoyed it.
Thumbed up after watching the part where you left in the mistake and how to fix it. That's excellent advice for any project
Thanks Michael!
Tony, Thanks for this video. I am trying to convince my wife to let me paint her ads truck. I think I may be able to with your videos and lessons. You make it look super easy. Awesome Video and learning lessons
I came across your videos while trying to research what possibilities are out there for a pretty bad paint job on a Mustang GT I was hoping to buy. (Trim/door handles all painted, nobody taped anything off, orange peel, dry spray, runs etc) Other than redoing the entire thing, there is no way out of it. (and for the price they're asking, it is totally not worth it! Unfortunately.) So, now, I spent the past few hours digging around your UA-cam channel and learning how to do some fancy stuff lol. My husband is very impressed with your videos (not that that means anything but, lol, he is a perfectionist and is irate about this GT and thinks you do flawless work!) I'm a new subscriber! I am a girl, yes, but, this is all so fascinating to me and I think it's great how you make this all seem so easy and are so enthusiastic and positive for newbies!
Hi Tony .... this is a VERY informative video ... thank you very much for the lesson.
Gud job,gud info,.
Tons of thumbsssup to you.
Gohead with more&more tho valuable video....
Vry² mch tq indeed..
wow. I used to need your vid some time ago.. but thanks. It's awesome. Thank you.
Your painting car vedeos help, give inspire...thanks for the vedeos! You're one of the best professional vehicle Painters!
Love watching videos like this, especially putting on the clear coats that was my favorite part about going to school for auto-body and collision and painting. Good job I noticed on your hood method you like the pull method and not push is that just your personal preference?
thank you very much for taking the time to show me this
Sheesh man this is inspiring! I want to get this down and hopefully in the future be able to paint custom designs on cars
Loving the attitude and energy bro,just subscribed
Thanks for the sub Man! Get your free training and know How to Paint like a PRO! Check out our VIP Program that covers A-Z step by process on Auto Body and Paint vip.learnautobodyandpaint.com/home
Awesome videos mate very informative. Thanks
great job man! thanks so much for sharing!
He could've edited his mistake, but he didn't. His honesty and willingness to teach is much appreciated.
Good master of paint, awesome job.
didnt know you could spray on clear that wet. Nice video man
Awesome video. Very inspiring. Love the detailed explanations
Thanks, Julio! Appreciate the feedback!
Tony, thanks for sharing the knowledge bro.
You're welcome, Abe! Check out VIP to get comprehensive access to DIY auto body work and paint! www.learnautobodyandpaint.com/vip-offer/
Very informative, very professional, thanks for this video 👍
That Was Dope,
Thanks Bud
Thank you for the amazing informative videos. Well done! God Bless
Your awesome work is inspiring me to take on my old rv exterior. Any suggestions to remove old decals (from 2000)?
Big up yourself Tony I've watch your videos and now I'm spraying cars thnx to u bro
I appreciate that
You are really a good teacher. Great stuff.
mad skills-great job and pro to point out your mistake and fix. Beauty.
Thanks, David! Really appreciate it.
Tony, what a great job, great video as well.
Thanks, Kev! Appreciate the support!
I like you showing your mistakes because we can learn from them too. Thanks
Thank you very much I am learning a ton been a mechanic for a long time career and now for enjoyment body work and painting was never my skill but you are teaching me so much thank you again. BK
Awesome, Brian! Hey why don't you check out VIP? www.learnautobodyandpaint.com/vip-offer/
Tony, I'm a LABAP VIP member (awesome value by the way,) and I just want to say - the most valuable thing I get from your instruction & videos is the drive & desire to keep working the project; thanks man. To everyone out there with something in the garage, never give up!
Joe thank you for the AWESOME feedback. Keep rocking bud!
Learn Auto Body And Paint DIY Mastery! What guns do you use? N what other gun brands your recommend? I've been looking into the devilbiss/tekna guns
just a tip for those wheel arches en edges just start with those if you do a clear coat then you wont forget them this tric always worked with me
Beautiful work my dude. You are teaching me a lot!
Great man! Did you see this one? ua-cam.com/video/fKy9YwfLQ6U/v-deo.html&lc=z13icxqhfuesivvqb04ci1yysxyqhb1hgx40k also get your free auto body manual here: www.learnautobodyandpaint.com
hi bro im from ontario. canada, just watch 2 of your vids,the one from today and jan 2. awsome stuff really enjoyed, learned alot. im a newbie, been airbrushing for a few years and am intrested in learning more. will tune in for next live show. thanks, take care.
very professional guy ! ty greetz from the netherlands.
Great tutorial! Greetings from Monterey bay✌
Thank you for sharing this!
You got ALOT of talent Bro. Very interesting...😎👍
awesome video man learning a lot from your videos
Thanks man! Don't forget to get the free auto body manual here: www.learnautobodyandpaint.com
Hi Tony, I'm doing the bonnet and new plastic bumper on my 2002 3j6 red Toyota avensis SR. I'm doing it with rattle cans..my bumber is causing me concern as it is raw OEM part. I've read contrasting ways in which to prime the bumper. I'm thinking adhesion promoter 2 coats and 2 coats 2k epoxy primer then 2 coats filler prime then 3 coats base then 2 coats 2k clear...am I right to go with this method or what would you suggest?
these videos are great man thanks i was able to paint my shaved engine bay on my ae86 corolla and got professional reaults.
Awesome man! You may like this one ua-cam.com/video/fKy9YwfLQ6U/v-deo.html too
Buen video grasias tony you are the best. Cheers. Ensenas muy bien en tus videos.
This is awesome man!
In June I am starting the auto tech program at a local Technical College, following up that program I was strongly considering welding or Auto Body. Throughout the duration of my courses I've acquired a 1986 AE86 Corolla to use as a learning tool.
Cool man nice car for sure. I am in Japan now :)
This may help vip.learnautobodyandpaint.com/exclusivevip
That was awesome dude, The result was nothing less than professional. Thanks for sharing.
Thank you for watching! ua-cam.com/video/fKy9YwfLQ6U/v-deo.html&lc=z13icxqhfuesivvqb04ci1yysxyqhb1hgx40k check that one out too!
nice job and attitude thx a lot for your vids.
Thank you
Awesome job !
Awesome - learning so much!
Fantastic!! Wealth of knowledge
Glad you enjoyed it.
My future may include a Jaguar XJ8 that needs painting. You've got some good info and I want to follow your videos. I would want to prep and paint this car myself.
Great Instructional Video, I am not new to auto repair, I was an auto Mech. for 18 years, but I have never painted a car, I am in the middle of restoring a 66 Chevelle and now due to the current economical environment I have decided to paint the car myself and one of my biggest worries was turning my shop into the color that I will be applying to the car but you have shown that will not be the case and you have given me that much more confidence to do this myself, the car is down to bare metal so now my next step will be to start applying filler where it needs, +I will then move onto after all the filler is smoothed out to applying a coat of epoxy primer is this a good idea for the next step? I have to you are very good,