My treadmill when walking from time to time the belt would stop .I would have to start again when this first started it would reset the distance to 00's now when it shuts down it it shutting down to 00's on everything. And also this was going on before all of this .I can turn on my fan it runs a 1minute then it shuts off? How can I fix all of these problems can anyone help please. Thank you! I have a Pro Tech cushioning 705 Trainer treadmill.
Wonder if you give help me out. I have a Nordictrack c1800. I can get the speed to about 5mph and it seems to run ok but beyond that the motor shuts off. All the lights on the display panel are still on. I tried cleaning the deck and lube it up still same issue. I then took the motor belt off so the motor spins free. Still have same issue? Would it be a control board, power board or motor issue?
***** I can get it to go about 5-6mph anything higher than that the machine will turn off the belts but all the displays will still be on. :-\ So pretty much same situation as you. I tested motor with a 12V battery and its works fine. So has to be one of the boards but not sure which one.
@@longle7603 Hi.. May I know if you find a solution to this. My treadmill having the same issue recently, I able to use it if the speed around 4-5mph, but soon after I increased the speed to 6mph it stops. But when I let it slip without being on the belt, it slips with no problem. Do you know what cause this?
My Reebok S9.80 keeps shutting off/shorting during workout. I'm assuming it's a load issue...the manual says not to lubricate the belt with silicone because it's pre-lubed...do I just need a new belt?
Do you have the full model number off the machine? The model number is located at the base of the machine, usually up front by the power switch or if it is a fold up unit underneath on the frame and should start with RBTL or 831
Thank you, here is a link to the belt, lube for the belt and a discount code to use - www.treadmilldoctor.com/reebok-s-9-80-rbtl696080-treadmill-walking-belt www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free DISCOUNT CODE - ME22
Thanks!! Something That you missed Check the fun on mcb if is working. If is not working it will Take a proximally 20 to 30 minutes according to how heavy the person is and it will shut down On that pricor. with that type of motor control boar
I have a treadmill that comes with LS error code, Lose if Signal, after I had a lamp and treadmill pluuged into the same outlet. The breaker blew but now the treadmill won't start. It counts down on the timer to get ready to walk then comes up with the LS error code. If I spin the motor by hand then the LS error code doesn't come up until I stop spinning it myself. What could be the cause of that?
My treadmill is running fine without a load but as soon as I go on after about 3mph it resets back to 0 after about 60 seconds. Is this a motor related issue? The belt is quite worn out but I don't think this is the problem.
If the machine runs fine without a load but shuts down with a load, this would indicate a worn walking belt. See link - www.treadmilldoctor.com/shuts-down-during-a-workout How old is the walking belt and when was it last lubed? Do you have the full model and serial number off the machine?
So what is it usually when the switch at the front shuts off? Do I need a new belt? It usually works fine until I hit about 6mph and after a minute or two the switch shuts off. What would be your best guess? Thank you
Yes, it could be a worn walking belt, excessive friction causing the unit to overheat and shut down. Do you have the full model number off the machine? www.treadmilldoctor.com/shuts-down-during-a-workout
@@treadmilldoctor it's a precor c954i. Do you have any recommendation where to buy a new one from? And a guide to change it out? Thanks for the quick response!
Here is a link to the belt and a discount code to use - www.treadmilldoctor.com/precor-c954i-120v-walking-belt-2 DISCOUNT CODE - ME22 Here is lube for the belt as well - www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free
hi I have a reebok irun pure treadmill .I have no error codes .The lcd switches on and you press start but belt wont move .This has happened after emergency cord was pulled ..was working fine till then please can you advise what I could do to get it working again please
I have a healthrider R60 and it shuts down every so often with no notice. I can step off of the belt and it starts up until I step back on. It may go 2 or 3 days and not shut down, but I can't depend on it. It has never shut down on my wife! Please advise.
This sounds like a friction issue. See links - www.treadmilldoctor.com/shuts-down-during-a-workout www.treadmilldoctor.com/treadmill-belt-bogs-down Do you have the full model number off the machine? The model number is located at the base of the machine, usually up front by the power switch or if it is a fold up unit underneath on the frame and should start with HRTL or 831
Thank you, you can try and lube the belt first but if it's too far gone, it's not going to help much. Here is a link to the belt and a discount code you can use - www.treadmilldoctor.com/healthrider-r-60-walking-belt-model-hrtl07120 DISCOUNT CODE - ME22 Here is lube for the belt as well - www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free Here is a test you can run to verify it is the belt - www.treadmilldoctor.com/dc-amp-draw Here is a video of the test if you have a clamp style meter - ua-cam.com/video/sxpfLTrGsoY/v-deo.html
Hi! I have U style treadmill. After starting, it runs for 1 min then stop & display error E08. what to do to reset the computer or fix the problem? thanks SVAR
Hello my treadmill make shuts down when i start workout and make sound (de de )and appear sighen E0 on the screen pleas tell me the trable and if I can fix it
You’re right, you’re not an expert. The guy in the video is an expert. If you were listening, the banging is to narrow the problem down by eliminating vibrations of the kill switch as a cause. So banging on it is a very good idea.
Hello my treadmill make shuts down when i start workout ,run for 4sec appear sighen Er 2 on the screen pleas tell me the trable and if I can fix it?Read more Show less
maybe i got lucky but after making a belt adjustment i had the same issues, i just loosened the belt tension and unplugged and started 2 times and the problem went away
how u fixed it same happened to my trade mill it stopped after 20 min ...i saw some smoke coming out of it and smell also wt happened its not getting on after 24 hr gape
Once you press start and increase speed the screen counts down but the belt wont move
With machine off,and you got on it,it's very hard to make the belt go around.
I have a pro-form treadmill and the console keeps restarting every 2 secs. The belt would run for the same amount of time and stops. Anyone help?
My treadmill when walking from time to time the belt would stop .I would have to start again when this first started it would reset the distance to 00's now when it shuts down it it shutting down to 00's on everything. And also this was going on before all of this .I can turn on my fan it runs a 1minute then it shuts off? How can I fix all of these problems can anyone help please. Thank you!
I have a Pro Tech cushioning 705 Trainer treadmill.
my treadmill just stoped working today, the power switch at the bottom still lights up but the panel where the programs are won't come on.
Your treadmill in put supply fault chak P.C.B FUSE & 12V. 15V. SUPPLY CHAK
how about going straight to the fix and leave all the extras
Mine stops after 3 seconds and the says low speed. My son set a program and now it does not work
Hello, if you run the machine without a load on the belt, does it do the same? do you have the full model and serial number off the machine?
Wonder if you give help me out. I have a Nordictrack c1800. I can get the speed to about 5mph and it seems to run ok but beyond that the motor shuts off. All the lights on the display panel are still on. I tried cleaning the deck and lube it up still same issue. I then took the motor belt off so the motor spins free. Still have same issue? Would it be a control board, power board or motor issue?
***** Unfortunately not. :-(
***** I can get it to go about 5-6mph anything higher than that the machine will turn off the belts but all the displays will still be on. :-\ So pretty much same situation as you. I tested motor with a 12V battery and its works fine. So has to be one of the boards but not sure which one.
@@longle7603 Hi.. May I know if you find a solution to this. My treadmill having the same issue recently, I able to use it if the speed around 4-5mph, but soon after I increased the speed to 6mph it stops. But when I let it slip without being on the belt, it slips with no problem. Do you know what cause this?
@@a.asyraf1096hey you ever find a solution to this?
Should I swing my arms when walking on a treadmill?
Sure, that is the natural way.
My Reebok S9.80 keeps shutting off/shorting during workout. I'm assuming it's a load issue...the manual says not to lubricate the belt with silicone because it's pre-lubed...do I just need a new belt?
How old is that belt? See link - www.treadmilldoctor.com/shuts-down-during-a-workout
Do you have the full model number off the machine? The model number is located at the base of the machine, usually up front by the power switch or if it is a fold up unit underneath on the frame and should start with RBTL or 831
@@treadmilldoctor RBTL69608F.0
I bought the treadmill 2nd-hand in 2014 and haven't changed the belt.
Thank you, here is a link to the belt, lube for the belt and a discount code to use - www.treadmilldoctor.com/reebok-s-9-80-rbtl696080-treadmill-walking-belt
www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free
DISCOUNT CODE - ME22
Thanks!!
Something That you missed
Check the fun on mcb if is working.
If is not working it will Take a proximally 20 to 30 minutes according to how heavy the person is and it will shut down
On that pricor.
with that type of motor control boar
What is the FUN on the motor control board?
I have a treadmill that comes with LS error code, Lose if Signal, after I had a lamp and treadmill pluuged into the same outlet. The breaker blew but now the treadmill won't start. It counts down on the timer to get ready to walk then comes up with the LS error code. If I spin the motor by hand then the LS error code doesn't come up until I stop spinning it myself. What could be the cause of that?
Mine started to shut off at 3.1mph but will run below that. Idk what to do
Hello, will the machine run okay without a load on the belt?
My treadmill is running fine without a load but as soon as I go on after about 3mph it resets back to 0 after about 60 seconds.
Is this a motor related issue?
The belt is quite worn out but I don't think this is the problem.
If the machine runs fine without a load but shuts down with a load, this would indicate a worn walking belt. See link - www.treadmilldoctor.com/shuts-down-during-a-workout
How old is the walking belt and when was it last lubed? Do you have the full model and serial number off the machine?
So what is it usually when the switch at the front shuts off? Do I need a new belt? It usually works fine until I hit about 6mph and after a minute or two the switch shuts off. What would be your best guess? Thank you
Yes, it could be a worn walking belt, excessive friction causing the unit to overheat and shut down. Do you have the full model number off the machine?
www.treadmilldoctor.com/shuts-down-during-a-workout
@@treadmilldoctor it's a precor c954i. Do you have any recommendation where to buy a new one from? And a guide to change it out? Thanks for the quick response!
Yes, we should have it. Do you have the serial number off the machine? It is usually up front by the power switch.
@@treadmilldoctor XBJ14R0003
Here is a link to the belt and a discount code to use - www.treadmilldoctor.com/precor-c954i-120v-walking-belt-2
DISCOUNT CODE - ME22
Here is lube for the belt as well - www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free
hi I have a reebok irun pure treadmill .I have no error codes .The lcd switches on and you press start but belt wont move .This has happened after emergency cord was pulled ..was working fine till then please can you advise what I could do to get it working again please
My platinum treadmill, when switch on immediately trips with a flash from motor.
Any advice
I have a Nordictrack T8.0 the display all turns on but it wont start or the incline wont work? works intermediately.
Great explanation!!!
I have a healthrider R60 and it shuts down every so often with no notice. I can step off of the belt and it starts up until I step back on. It may go 2 or 3 days and not shut down, but I can't depend on it. It has never shut down on my wife! Please advise.
This sounds like a friction issue. See links -
www.treadmilldoctor.com/shuts-down-during-a-workout
www.treadmilldoctor.com/treadmill-belt-bogs-down
Do you have the full model number off the machine? The model number is located at the base of the machine, usually up front by the power switch or if it is a fold up unit underneath on the frame and should start with HRTL or 831
Thank you, you can try and lube the belt first but if it's too far gone, it's not going to help much. Here is a link to the belt and a discount code you can use - www.treadmilldoctor.com/healthrider-r-60-walking-belt-model-hrtl07120
DISCOUNT CODE - ME22
Here is lube for the belt as well - www.treadmilldoctor.com/world-famous-lube-buy-one-get-one-free
Here is a test you can run to verify it is the belt - www.treadmilldoctor.com/dc-amp-draw
Here is a video of the test if you have a clamp style meter - ua-cam.com/video/sxpfLTrGsoY/v-deo.html
@@treadmilldoctor best way to apply belt lube
Lube Belt - ua-cam.com/video/kgUpzwGm03c/v-deo.html
I have a kettler treadmill that keeps saying 'SIL' and turning off every couple of minutes! I have sprayed wd40 however doesnt seem to work?
Hi! I have U style treadmill. After starting, it runs for 1 min then stop & display error E08. what to do to reset the computer or fix the problem? thanks
SVAR
clean up the sensors, easiest and laziest way is to use the blower to blow out the dust.
Very helpful!! Thank you!!
Glad it was helpful!
hi there my trradmill went off but now it wont turn back on. i try to rest it but nothing is working
Please help problems having my supperfit treadmill that it syop meddle jogging or running speed 10.0 11.00 12 13 automatically give code E05
My Nordic Track Incline Trainer x9 stopped working. The console won't power on.
my strat and stop button is not working or the numbers everything else works what can I do.
Open cover & baten cantinuti check if not work
Chang baten
Hello my treadmill make shuts down when i start workout and make sound (de de )and appear sighen E0 on the screen pleas tell me the trable and if I can fix it
What if u r on the treadmill for 50 min n it died. Walking n running does cause it but it just keeps dying at 50 min or sometimes 30 min.
Hi there Have you sorted that out or not, please let me know - have the same problem
timer stops then after 1 minute running belt stops.
What model treadmill?
My tread mil keeps saying workout complete and it's mad annoying
what make and model number machine do you have?
my treadmill stops with our without no one on it.... new rear roller from Horizon, well lubricated and clean. About 6 years old.
Josh Barry horizon sucks...mine has been faulty for years.
I HAVE A GOPLUS 800 TREADMILL WHEN TURN ON WILL NOT START AND BROAD READ e1 code how to fix that
For a person that doesn't know anything about treadmills this didn't help...
Maybe I can help, can you describe what's going on with the machine?
@@treadmilldoctor my treadmill would shut down after 30 minutes when I get off it would start running
I replaced the deck and belt according to horizons direction and it still shuts off.
You need a new controller board.
@Ionlyexistpardner. Need to Junk this junk. Still doing same thing years later.
This was a bit misleading not to helpful either
Great tip it worked
I'm not an expert but I think "Just bang on it" doesn't seem like A good idea😂
Actually It did work for me 😂😂😂
You’re right, you’re not an expert. The guy in the video is an expert. If you were listening, the banging is to narrow the problem down by eliminating vibrations of the kill switch as a cause. So banging on it is a very good idea.
Hello my treadmill make shuts down when i start workout ,run for 4sec appear sighen Er 2 on the screen pleas tell me the trable and if I can fix it?Read more Show less
I'm have same e2 how to fix
I’m have the same
maybe i got lucky but after making a belt adjustment i had the same issues, i just loosened the belt tension and unplugged and started 2 times and the problem went away
I have a Nordic track spec 4001 and it hasitate when I am on it please describe problem
😮just show ppl how to repair then talk to it.
Hi, how can we help you? Can you elaborate on the issue you are having with your machine?
@@treadmilldoctormy treadmill stopped working during the workout. The light by the base still works but the machine itself isn’t working.
Them shorts tho 😉
never mind i fixed it
how u fixed it
same happened to my trade mill
it stopped after 20 min ...i saw some smoke coming out of it and smell also
wt happened
its not getting on after 24 hr gape