Це відео не доступне.
Перепрошуємо.
2003-2006 Cadillac Escalade/ Yukon/ Silverado Stereo Upgrade | Radio Installation Guide
Вставка
- Опубліковано 27 лис 2021
- Hi guys, Today I will be installing an aftermarket radio in a 2004 Cadillac Escalade. The process is pretty similar in other GM products like the Yukon, Silverado, and Suburban of similar years.
🛒PARTS LIST:
▪️ Harness kit without face plate: amzn.to/42j4dDT
▪️ Face plate: amzn.to/3Shqiho
▪️ Harness kit with face plate: amzn.to/3OOA0Hl
🛒TOOLS NEEDED:
▪️ Wire strippers: amzn.to/3I5xVmi
▪️ Butt connectors: amzn.to/49CqHlI
▪️ Soldering iron (optional): amzn.to/3uNnaC2
▪️ Heat shrink (optional):
▪️ Dielectric grease (optional): amzn.to/3HDPTMw
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
does the cd player still work in conjunction with the sony
Where can we buy all the wiring harness and adapters for the stereo
please share a link to rp5 gm11 and wire harness
Question: The red and white RCA cables from the vehicle, where did you plug those into on the new radio ?
Hey Brandon. Honestly I can't remember if they were outputs for the amp or inputs from the CD changer 🤔. This was a customer's vehicle some time ago. Sorry
I'm doing the same install..do you sell all those pieces in a package that i can purchase from you.?
I have an 06 escalade low volume on the radio, should I replace de radio or the amplifier???
my dash was recently taken apart by mechanic to replace heater core and heater blend doors. Since then, my XM radio and 6-CD changer do not work. Did the mechanic forget to plug something back in? Both seem to work, but no sound through the speakers.
There might be something unplugged or a popped fuse?
Did you need a retain chime module bod as a part of the harness? Seems different then the 03-06 chevys
If I remember correctly the kit came with a new chime box. The kit was purchased from crutchfield.com
I did this with the same stereo but the new version of the RP5 and my speakers are playing louder on the left than the right. Any idea what it might be?
That's interesting 🤔. This may sound silly but double check that the volume balance is centered and not favoring one side.
@@ValleyMobileAutomotive I have to set it almost all the way to the right side to make it sound centered. All the way to the right still shuts off the left which is even more weird.
How can you keep the rear DVD player working
I think it depends on your stereo and if it can support that input. This kit was provided by the customer, I just installed it for them. So I'm not 100% sure
Why don't you list the part numbers for install kit and wire harness?
There are a couple different options available for this vehicle. If you would like to look up what your vehicle takes you can go to crutchfield.com. They have a very good website and customer service.
wich is the audio harness in the back? im trying to install a bluetooth but dont know wich is it
what size touch screen will fit ..?.. 7" or 6.8"...?
Hey Tango, these were customer supplied parts. If you go to crutchfield.com and search with your year, make and model they will show you all the stereos that will fit and what to get for the installation 👍
@@ValleyMobileAutomotive Hey ..Thank You...I totally forgot about those guys..Thanks again for Your Time on the Vid...Tango..
Do you have the link of the hardness ? To buy ?
I don't 😕. The customer purchased all the parts. I just installed them. A good website is crutchfield.com
@@ValleyMobileAutomotive thank you very much !
No that’s 2 much work bro .. just disconnect the other harness from the amp .. take the outs connecting to the ins .. simple