Ford Carburetor Operation
Вставка
- Опубліковано 31 лип 2024
- Episode 581 Autorestomod
We explain the operation of the Autolite 2100 used on the Galaxie Mustang Falcon F100 Fairlane Montego Comet.
Jford@autorestomod.com
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.npdlink.com
Insta: @npd_nationalpartsdepot
www.eatondetroitspring.com
Insta: eatondetroitspring
Facebook: / eatondetroitspring
www.rrsusa.com
Insta: @rrs.usa
Facebook RRS USA
00:00 Introduction
00:18 Check fuel pressure Autolite 2100
01:16 where is the Idle Circuit Autolite and Motorcraft carburetors
06:40 Autolite Motorcraft 2100 4100 accelerator pump
09:19 Main Jet Circuit 4100 2100 Autolite Motorcraft
12:58 Power Valve Circuit Autolite Motorcraft carburetor
16:10 Possible Vacuum leaks Autolite Carburetors
17:48 Tips and Tricks 2100 4100 Autolite Motorcraft Carburetor
18:50 End of Video - Авто та транспорт
As always Jeff , great and detailed information 👍
Thank you Paul
Manual choke 0:07
Great job buddy. I had trouble getting my mustang to not run hot for years. Saw a video from thunderhead 289 on fuel pressure and heat issues. Sure enough I was at almost 10 psi. Threw on a regulator and it fixed the problem. Psi is very important in lots of areas.
Thunderhead is a great resource for carburetor stuff!
Great video. I've seen needle valves stick open when an engine has sat too long. Hadn't heard of the "heat treatment" method of cleaning that fuel screen before. Take care of yourself, Jeff, we need you out here.
Thanks for the kind words Mr. Ed
Great video, looking forward to the actual rebuild now.
We'll be shooting at this coming Saturday
Enjoyed the video, great job!
Thanks
Great video! Bummer about you injury. Get well soon!
Working on it. Thanks for the kind word.
Good vid Jeff!
Thanks my friend!
Very informative!
Thank you for the kind words.
As always.. excellent
Thank you!
Carburador Motorcraft bijet , o melhor carburador do mundo !!!
Nice job !
Hello from Brazil 🇧🇷
Gracias
Great video Jeff!! I hope you start feeling better soon. I hope Cam is doing OK too. Maybe he’s still trying to recover from Thanksgiving? By the way, thanks again for an invite for Thanksgiving! ✌🏻
You are welcome! Cam was fine. Just bored. We ended up with enough operators so he just soaked up the carpet and kept me honest on some of my wordy words.
😎
Jeff, where did you get the shoulder bolts and nuts? What size are the bolts and nuts?
The bolts and nuts are hardware store items and get them at Lowe's, home depot, Pretty much anywhere hardware is sold. I recommend getting bolts that are right at the size of the holes in the carburetor base.
On that particular carb/engine combo , according to Ford, the #47 mains are for up to 0-5000 ft altitude and 5K-10K ft used #45 jets. Over 10K feet they speced #43 jets.
I have the '69 revision of the '60-'64 Ford parts catalog. It shows what booster is supposed to go to which carb but it doesn't have your particular code. It shows CA, CC and CE for '63. It doesn't show one for any carb/engine combo of any year with a W. The only B was a BA for a secondary booster for a 4bbl. It's possible an earlier version catalog might show more data.
I'd love to have the early 1960-65 and the 1966-73 Ford Master Parts Catalog.
@@AutoRestoMod They were available in digital format. I think I got mine from AutoKrafters. I haven't tried to find any of the original issues.
Ive got a 83 ranger 2.8 with a 2 barrel motorcraft it runs good untill you shake the truck and it runs out of fuel ive adjusted the float and still same thing happens
Idles good and revs good just when the truck rocks back and fourth
Could be a pickup tube issue. Maybe a hole or rusted.
This distracts me from the thought of rebuilding my 390 haha
Me too!
RIP CAM.
He did start to snore...