Це відео не доступне.
Перепрошуємо.
DIY: Make a 6Ah 24V Kobalt power tool battery. Small hack, big improvement.
Вставка
- Опубліковано 9 чер 2019
- Home made a 6Ah power tool battery from a 4Ah and a 2Ah. Not only does it last longer, it also gives you more torque. The battery is now bigger so it doesn't have to work that hard either. And finally, it doesn't have to go through as many cycles as a smaller battery so its lifespan is significantly increased. Small hack but big improvement.
You're a genius, I'm going to try this for my e bikes for sure!
As always great video. Great way to get the kids involved (and interested) at a young age!! I am impressed (as always).
Thanks John!
Bravo. I also owned one Razor Crazy kart , the original battery just can support us 30 minutes. Impressive that, your battery still 4 bar power left after 30 minutes .
Good battery construction and nice funktioniert Carson. ....
Thanks! Now I can make my two 2ah batteries into a 4ah instead of trying to sell both and get a 4ah. 😀
You’re son is a lucky boy to have a cool dad like u. I really enjoy all your vids. Cool spot welder. Where did u snag that?
Thanks Bill. I got the spot welder on ebay for about $100. So far it's worth it.
excelent job , great idea
You should combine the Kobalt high output batteries to get a 8 or 10 ah high output battery that would be awesome too see
Thank you!
Very nice job really like that welder machine if you don't mind brand and model will be great, keep them good videos coming 👍🏻
It's a Sunkko 737B Spot Welder. I made a full review on this video: ua-cam.com/video/7UUte7ze850/v-deo.html
Nice 👍 Thanks
Or you could just buy the 6amp hr battery that's premade? But I was curious as to what is inside these batteries thanks for opening them up.
It's probably cheaper though if you buy the individual 18650 cells though and say turn a 2 or 4 AH into an 8 AH
Use shoe goo to join the battery together
The 6s packs are a nice voltage for sure, but in Canada, Lowe's wants a left arm for the fuckers. Too bad.
Wonder how it would be if you got several of the 40max kobalt batteries in this fashion ? Big battery lol
Will this technique work with most other batteries? Hart uses Samsung cells and they're pretty cheap
Genius 👌
yaah .. good work
what is the name of the welding machine ?
It's a Sunkko 737B Spot Welder. I made a full review on this video: ua-cam.com/video/7UUte7ze850/v-deo.html
Does it fits at the razor`s scooter battery compartment?
Can you help me I have a 20v 5ah dewalt battery and am wanting to merge it with another exactly like it but my battery’s are set up different then kobalt brand is there a way to email you or anything?
What was that top on the 48v cart , link?
Can this work on a 18v milwaukee battery
Doesn't kobalt sell a 6ah battery?
Yes, 2 amp, 4 amp, 6 amp and 8 amp.
The batteries that say "ultimate output" in yellow are the newest type of batteries 21700 cells, the other batteries that don't say that are 18650 cells 👌
This guy is on some steroids xD !
Good dayi have a 4 amp battery wich will not take a charge now i like to combine it with a 2 ah which is fully charged should i drain the 2 ah first?
Hey, I'm wondering if you know how to make the Kobalt 24-VOLT MAX Charger to run on 220V/240V? Planning to bring that to Asia with me. If I could make it run on 220V, it would be great so I don't have to use the converter. Thanks
fun
How much run time do you get with 6ah on that 48V cart?
I like your accent. Is your primary language Mandarin, Cantonese or other? Thank you
Where did you get the bolts for the case and what kind of tape was that?
Home Depot or Lowes has every type of bolt you can imagine, every size.
This is Almost exactly what I was looking for, only that i want do it wutha a 20v dewalt. Do you think it works??
It would be the same thing on the Dewalt. The only thing different is the Dewalt has 5 cells whereas the Kobalt has 6 cells.
@@vuaeco i like you man 👍 my batery has a 1.3 ah capacity. I'm thinking to replace all 5 x 1.3ah LG cells by 10 x 3ah sanyo cells, do u think i could have a problem with the bms card??
@@sergioelbot9924 Won't be a problem with the BMS. Just make sure the cells are high discharge cells of at least 15A each
@@vuaeco thank u so much bro 🍻
Why not just replace the 2000mah 18650’s with some 4000’s and make an 8ah in a 4ah battery casing
Those are 21700 cells.
They make a kobalt 24v 6.0 battery.
How big can you make it before you start having problem thanks for the video.
The only problems from building this are weight and cost. If you can carry it, you're good. If you can afford it, you're good! :D
I am not an electrician or have enough knowledge in the subject but maybe you can have a huge battery sitting on the ground or floor with an umbilical cord connecting the tool and supply together. That could dramatically increase capacity and significantly reduce handling weight on the power tool. Let me know if this idea would work.
Buy a corded tool then lol
A small backpack of some 20.000mAh or more with a small cord.
As you know this is pointless.
What is? Replying to you?
@@d-c-g6525 LOL!
Niiiice