Ceramic Coating Care Part 1 - First week after coating

Поділитися
Вставка
  • Опубліковано 24 лис 2024

КОМЕНТАРІ • 88

  • @scribble1531
    @scribble1531 2 роки тому +5

    4 years later, still great advice! Thank you!

  • @brandonjulio4067
    @brandonjulio4067 4 роки тому +8

    5:00 in is exactly what I’m seeing. I have a black 2020 Subaru Forester sport. Was ceramic coated, sat overnight and I picked up after 24hours. Literally while driving around for work immediately after it got poured on with rain. I rinsed it off when I got home and lightly dried it...I can see in probably about 4 different spots some blemishes. I hope they go away after a few days, already let my detailer know to check on if they do not go away but this gave me some peace of mind. Thanks 😇

  • @rickintexas1584
    @rickintexas1584 6 років тому +2

    Great advice. Thanks. I’m having my car coated next week in Houston. I was worried about rain and bird droppings.

  • @sambologna5443
    @sambologna5443 5 років тому +4

    So 3 days after i picked it up, it downpured over night. It was dry when i awoke, Then 2 days later, another 20 minute downpour! This time, i drove it a couple miles, and lightly dried with micro-fiber. I know you said in this video, it's protected by rain. Im talking BUCKETS of rain, twice. Just want to make sure its okay. Plus, Ceramic Pro Coating says 2-3 weeks for curing. Hope you read this. Thanks. Great videos

    • @randomstuff53078
      @randomstuff53078 Рік тому +1

      So what happen with your coating ? I pick mine up tomorrow. It’s been on/off raining all week

    • @AndreNguyen7
      @AndreNguyen7 3 місяці тому

      Did you pat dry or wipe dry with your microfiber?

  • @alaskaaudioguy35
    @alaskaaudioguy35 3 роки тому +1

    I have to drive three construction zones on the way home after getting it coated

  • @muradb1994
    @muradb1994 Місяць тому

    I waited 2 weeks before it's 1st wash pressure washer foam Cannon two bucket system

  • @nicksdragon6929
    @nicksdragon6929 3 роки тому +4

    How do they get rid of a high spot in 5 minutes after it has been on a car for a week? I would love to know that technique. Thank you. This is a great series.

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому +1

      Chemicals or light hand polishing usually does the trick

  • @Somemjf
    @Somemjf 2 роки тому +1

    Question. I did the DIY Avalongking ceramic coating. Did all the prep and everything. In the garage left it for three days, took it out in the sun for the first time and everything looks great. When you get up close you can see what looks like water spots.. planning to was it Sunday as it will be 10 days after the coating. Curious if you know why I would have water spots? And how to remove them?

  • @AndreNguyen7
    @AndreNguyen7 3 місяці тому

    I just got mine done today, said it's going to rain in 3 days. If it does, should I microfiber wipe it off after it stops raining? I unfortunately do not have a garage to park it in.. :(

  • @zoomsnipes5448
    @zoomsnipes5448 Місяць тому

    Just got my car ceramic coated today, I’m picking it up Saturday because the guy didn’t finish the entire coating, some some of the car has 2 days to cure, other parts one. I wanted to let my car sit under my car cover for a week. Will my car cover do any damage to my coating?

  • @Zip_Zero_ZILCH
    @Zip_Zero_ZILCH Рік тому +1

    I recently had a coating applied and the car set for 48 hours but then I had an unexpected road trip that I had to leave for today and ended up with bugs on the front end. Is this going to pose a bigger problem or do more harm if I just leave everything sit until the seventh day

  • @alaskaaudioguy35
    @alaskaaudioguy35 3 роки тому

    What about if you have to drive on a dirt road I live in
    Alaska I’m getting mine coated them k have t
    Drive 165 miles miles back home the road will make it dirty and their will be bugs I will need to wash it a few days after to get all that dirt off what do I do them if your not suppose to in 2 weeks

  • @Doodledad_
    @Doodledad_ Рік тому

    My car got caught in the rain at the 7 day mark after ceramic coating , was it okay if I towel dried it with a microfiber drying towel? I didn’t wash it , just dried off the water with the towel .

  • @mikeybowden
    @mikeybowden 3 роки тому +1

    Finger print smudges? Should I remove them or leave them

  • @vinz8857
    @vinz8857 Рік тому

    Hey, so I got my car ceramic coated 5 days ago and it rains. And so much waterspots on it can i spray water on it and wipe it ?

  • @tarunbanga5890
    @tarunbanga5890 3 роки тому +3

    Hi. I got my black colour car ceramic coated 3 days back but now its full of dust and have some bird poop ( I live in India). So should I clean it straightway or leave it in its present condition for 4-5 more days? Thanks

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому

      I would gently remove the bird poop with a damp microfiber towel but beyond that follow your detailers post coating instruction.

  • @Starchiooo
    @Starchiooo Рік тому

    hey i just got my car ceramic coated and it’s cured for 5 days and i went to look at it at the shop it got done at and there is little hazing spots, will them go away over time or should i bring it up ? LMN ASAP

  • @abhikhinda7705
    @abhikhinda7705 2 роки тому

    I get the coating yesterday and its cold here in uk. So should i apply it?? In this weather when the cars are like iced in the morning..??

  • @Amayajuan97
    @Amayajuan97 6 років тому +5

    I payed a Carbon Flex coating for my 2015 BMW X1, by the moment I took it home after the 24 hours treatment it started raining and it got dirty on the sides. I didn’t wash it or anything similar but my concern is having water spots and it affecting the final result.
    What should I do?
    Pd: It’s been two days since I got my car coated.

    • @VisualProDetailing
      @VisualProDetailing  6 років тому

      Juan David Amaya Roman follow the coatings specific directions. Rain should not leave water spots. I'm not familiar with that product, but if in doubt contact the company and ask for a recommendation.

  • @MrMLNOP
    @MrMLNOP Рік тому

    After i get my car then rain pour but its not that strong. I think the ceramic just finish for about 3hrs then it get wet from the rain what will happen?

  • @thatdudeCR
    @thatdudeCR 6 років тому +1

    awesome advice thank you!

  • @mp2833
    @mp2833 7 місяців тому

    What if your windows are ceramic coated....don't clean the windows either?

  • @criscerv1598
    @criscerv1598 Рік тому

    Can i use wipers after ceramic

  • @scorpioleo16
    @scorpioleo16 Рік тому

    My car was coated Wednesday. Yesterday a heavy rain filled my hood with giant water spots. It looks horrible… Are those water spots affecting the ceramic coating? It’s better to get the car to the detailer for washing or just sit patiently as the ceramic cures ?

    • @VisualProDetailing
      @VisualProDetailing  Рік тому +1

      Should be just fine. Rain water will often spot up because of dirt around it but does not leave water spots with due to hard minerals that etch like tap water does.

    • @scorpioleo16
      @scorpioleo16 Рік тому

      @@VisualProDetailing The spots are white, like they have calcium residues or other minerals. I guess it was rain water combined with dust and I don't know what molecules, because the end result is hard water spots, that look like limescale.

  • @unnheann86
    @unnheann86 5 років тому

    my car got expost to rain drop after coating..and the coating use heat infrarate to cure when coated

  • @hectorflores1544
    @hectorflores1544 2 роки тому

    Hi I just got my truck ceramic coated this week. I understand to wipe bird poo. Off. Should I also wipe the bee poo(small yellow/orange spots) off during the curing process? Or just wait till the first wash.

  • @joliewu8625
    @joliewu8625 3 роки тому +1

    I did a rinseless wash with Mckee 914 on the 8th day. I have Cquartz original, is that okay? Thanks!

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому +1

      Should be fine! Always follow your detailers(or if you applied yourself) coating manufacturers recommendation for that specific brand however.

    • @joliewu8625
      @joliewu8625 3 роки тому

      @@VisualProDetailing it says full hardness cure 7 days, but my car has been garaged most of the 7 days, not sure if thats okay since it didn't get sun a lot

  • @jacktran4687
    @jacktran4687 4 роки тому +1

    What if after applying the ceramic coating bird poops on the car. What can you do?

    • @splashx6372
      @splashx6372 3 роки тому

      Lukewarm water, wipe, towel dry

  • @scotta5766
    @scotta5766 10 місяців тому

    Any recommended cleaners for coated wheels?

    • @VisualProDetailing
      @VisualProDetailing  10 місяців тому

      Any PH neutral car wash soap should work well. If they have a lot of brake dust buildup pre-rinsing them with a low PSI pressure washer then using an ferrous iron removing wheel cleaner should get them back in great shape, I use 3D BDX wheel cleaner in my shop as it works just as well if not better as the expensive ones at a fraction of the price.

  • @tiktokz-dx7he
    @tiktokz-dx7he 5 років тому +3

    Does 7 days apply on ceramic pro also?

  • @dennisthemenance5433
    @dennisthemenance5433 6 років тому

    HOW COME USING WHITE AND NOT DARK BLUE OR BLACK?

  • @weston407
    @weston407 3 роки тому

    what happens if you live in Florida and it rains constantly during the summer?

  • @unnheann86
    @unnheann86 5 років тому

    so does it affect the coat?

  • @badformtommy
    @badformtommy 3 роки тому

    Was it ok to apply C2v3 to a CSL coating two days after coating was installed and sitting in garage?

  • @robinheiz
    @robinheiz 3 роки тому +1

    Can I wash it (water only high pressure washer) on the 8th after application? I got two layers of Qjutsu Soft99 Ceramic (10H) on my car. The car has only some dust and some rain dirt on the lower part of the car.

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому +2

      Not familiar with that product, but in general it is best to use the pressure washer to pre rinse, then hand wash with microfiber mitt and car wash soap, rinse, then completely dry. Never let any car ceramic coated or not air dry.

  • @arsalanazhar3340
    @arsalanazhar3340 Рік тому

    hey! awesome video as always. i have a question. i got my car ceramic coated and its first wash is due after 2 days. but unfortunately there was rain in my area and now my car has drops all over it and they also dried up on the car. i am worried whether this would damage the ceramic coating or leave water spots. should i really wait 2 more days for the first wash ?

    • @AlOL81
      @AlOL81 Рік тому

      The water spots are easily removed with specific products like Chemical guys Heavy Duty water spot remover. It won’t damage the ceramic coating. Hope it helps

    • @michaelbrown-ws1pc
      @michaelbrown-ws1pc Рік тому

      My coated car was rained on 4 days after process and I have no water spots, and they said you can wash it after 2 days. That's odd, most videos clearly state not to wash 7-14 days after coating. My detailer told me 2 weeks. What type of coating did you get?

  • @nickhines1131
    @nickhines1131 3 роки тому

    Is this the same for turtle wax ceramic spray from AutoZone?

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому

      Highly doubt it, sprays are usually much less stringent about cure times and wash timing.

  • @therealist218
    @therealist218 2 роки тому

    What about winter weather states such as salt after getting cermic coating - do u not wash until after 7 days also will cure time still be effective in cold weather

    • @VisualProDetailing
      @VisualProDetailing  2 роки тому

      Usually you will be fine as long as you are observing the initial 12-24 hour period. During bad weather months in our shop we like to apply a secondary sealant such as Gtechniq C2v3 or Gyeon Cure to freshly coated vehicles to help protect the coating during the initial 7 day cure period.

  • @jattlifestyle
    @jattlifestyle 5 років тому +1

    if ur clear coat faded can u use few layers of ceramic coating work for while or not

  • @helloiiser
    @helloiiser 6 років тому

    I applied Cquartz UK 2 months ago and followed it up by reload. Can I apply a second coat now. If yes what procedure should I follow.

    • @VisualProDetailing
      @VisualProDetailing  6 років тому +1

      That would be a no. You would have to chemically strip the reload which would be very hard to do without polishing. Reapply the reload regularly and you should be fine.

  • @boarhog1979
    @boarhog1979 2 роки тому

    Is it normal to feel slightly greasy after the coating has been applied and dried for 12+ hrs? Thanks in advance

    • @VisualProDetailing
      @VisualProDetailing  2 роки тому +1

      It really depends on the coating. Some are slick, some are smooth, some are tacky, especially the first few days.

  • @susanmcgee3635
    @susanmcgee3635 4 роки тому

    For a commercial truck , would you get logos applied before or after ceramic coating?

  • @naazimmaredia796
    @naazimmaredia796 3 роки тому

    I got qtechniq ultra put on and it had two hot sunny days before it started to rain and the rain hasn’t stopped yet. The first rain storm was high wind and just pounded my car for over an hour as I was trying to quickly get home. Should I be worried about the coatings longevity now that this has happened within the first 4 days of it being applied?

  • @Outwest483
    @Outwest483 4 роки тому

    Is there anyway to get a sticker to stick to a window?

    • @WORMGERM
      @WORMGERM 3 роки тому +3

      Yes, the adhesive on the back of the sticker

  • @Outwest483
    @Outwest483 4 роки тому

    I just had a ceramic coating put on and now I can’t get any stickers to stick to my rear window... is this normal?

  • @ggqbc
    @ggqbc 4 роки тому

    What if salt hits it ?

  • @trento8397
    @trento8397 2 роки тому +1

    If a professional applied the ceramic coating there should not be any high spots

    • @VisualProDetailing
      @VisualProDetailing  2 роки тому

      Even professionals with years of experience can make mistakes, it is not unlike any other profession.

  • @claytgibbons2089
    @claytgibbons2089 3 роки тому

    What about rain water within 7 days

  • @tiktokz-dx7he
    @tiktokz-dx7he 5 років тому

    Is it possible to wipe the dust on my car or should I leave it like that (3days curing)?

  • @marcelm4726
    @marcelm4726 3 роки тому

    Can i put a cover on after ceramic? My garage has no shade at all.

    • @VisualProDetailing
      @VisualProDetailing  3 роки тому

      No!! Covers can hold in moisture which can cause the ceramic to cure improperly. I have seen BAD things happen from people covering cars before the cure period is over.

    • @marcelm4726
      @marcelm4726 3 роки тому

      @@VisualProDetailing should i leave without cover? What if it will rain? I dont have ang shade in my garage

  • @christopherjohanntan969
    @christopherjohanntan969 5 років тому

    Hi, May I ask if I can use a mothers clay bar on ceramic coated car?