Beginner RTF mini XK a160 Maiden crash and unboxing J3 piper Cub flight Gyro stabilisation RC plane
Вставка
- Опубліковано 15 вер 2024
- Affiliate product LINK www.banggood.c...
RadioMaster TX16s Affiliate LINK www.banggood.c....
Brand: XK
Model: A160
Material: EPP
Wingspan: 650mm
Length: 460mm
Color box size (CM): 50.5 * 15.1 * 20.8mm
Flying weight: 145g
Color: yellow
Flight time: about 6 minutes
Charging time: 30-60 minutes
Remote control mode: 2.4G remote control
Remote control distance (m): about 200 meters
Motor:1406 brushless motor
Battery: 7.4V (500MAH
Thanks for Watching
Like comment subscribe
Next flight I will add nose weight because of the spiritual of dead and in expert mode it wants to fly up. Both problems caused by a heavy tail. Have another go
Ok
THE PROBLEM IS ACTUALLY with the Gyro/Stabilization system intermittently giving full left rudder lock and if not high enough to recover will take you DOWN! I've actually tested it on the bench and was able to make it happen!
Take the flight controller out. Hot glue two 5g servos in its place for rudder and elevator. Get a 10 or 15 amp esc/bec and replace the stock esc. Fit a flysky receiver in the cockpit and change all the plugs that need changing. Tame her with expo and fly the snot out of it. Excellent little plane.
This is a beautiful looking little plane. DON'T ruin it by trying to fly it. The flight controller in it has some MAJOR problems. Check the RC Groups Forums thread on it and watch the UA-cam videos by the respected reviewers Andrew Newton, Albert Kim, Quadcopter 101, Brian Phillips, RC Saylors, Lapeos RC and many others. (Disregard the "It's marvelous" videos from the usual sellers' shills!) For a video of the real problem causing this to crash regularly see the video by "Props and Wheels" and for modifications see "Doggeslife" and "Ground Control RC".
It is a top looking plane. Thanks for your comment
Is this an EPP foam plane
What kind of motor?
Thanks for the video, well done
Guess it is EPP it does air bubbles in foam but good enough. The old a600 foam is bad . Specs says brushless motor
Should use a 3 point curve for your rates instead.
I just use the expo I like to keep things simple
Seemingly a great design . Too easy to bend the motor shaft on the eflite Cub S2.
Friend how long did you fly with a battery
6 to 7 minutes
Nice to meet you. I set the protocol to KN and the subprotocol to WLtoys, but I can't bind. Please tell me how to bind. I hope to see you in the sky
latest cub runs a different reciever, new protocol is v911s, sub e119
Was thinking about getting this 1 to . nice plane 💯
Good every RC lover should have a Piper cub big or small they good flyers
@@blowy48flyrc I flew the fx-930 j-20 today in video . flew just like the fx861 but better .
Yes I have to check out your videos soon. Good to hear your enjoying your flying
@@blowy48flyrc thank you . I got you subscribed so I'll be watching 💪
Question my friend does the remote have a timer on it for flying..???
No timer on radio. It flys for 6 to 7 minutes
Why did you skip the bill to my good friend wanted to watch you put it together so I could put mine together
Sorry my brother built this one.
I need this plane and I will sell my UMX Cub S2
Any advice. My little cub doesn't want to bind to my tx16s radio. Can you help me please
I not to shore it bind ezy for us. I do remember the a600 wouldn't bind on that old iranger box
Make sure that you are trying with the correct protocol. The older versions used KN protocol. The newer version (with extra sockets for S-bus or DSM satellite receivers) uses a different protocol. (There should be an extra leaflet included with the manual in the box telling you which it is.)
Oh and you may have to do the frequency tuning to get a bind. I know that we did on our KN protocol one.
@@theoztreecrasher2647 thanks for the info. I have look in the box. No extra leavlet. Do you know who can I contact to find out. I can see on the reciever there are 2 extra sockets. They say it binds with the FUTABA TX. Maybe I will try a futaba reciever protocol.
Try V911S/E119. Also note that you will need the latest updated firmware versions for your TX16S to have access to that stock protocol. (But not the older S-FHSS protocol if you use a Futaba satellite.)
@@theoztreecrasher2647 I have updated the protocol firmware to V1. 3.3.7 AETR. I see that there is a XK protocol now I'm going to try that today. Will let you know. Thanks for sharing all your info. I really appreciate it 😊
How do you change mods bud. The left bottom up top I see changes low and high throws I'm guessing but top button?
G'day in the video 13.20 minutes. 6g to 3d is top right button and different rates top left 80 to 100
What happen in 19m05s??Almost a crash!
I don't know
What happened my friend you did not show your building process for this aircraft you should all the parts and then the next page to playing with put together not good my friend not good you should have shown us how you were putting it together..👎👎👎👎 because your review said unbox and build you did not show us how to build it..
Yes hard to film everything my brother put it together