Відео

I replaced the engine with a TURNERGY D2826/6 2200 Kv with an APC 7*4 prop. Consumes half the power, is much quieter and the controller stays cold. This is really much better, and it is a small cost.

Looks like perfect match for Radiomaster R81 receiver. Does anyone tried?

Do they have 3s micro recivers?

Very,very helpfull and clear for me. I will use this for my 2024 Radiomaster Zorro 4in1. It it almost the same,only simpeler display. Thank you very much,your time and effort for this YT video explanation will get me faster and saver in the air.

Hola, con la propeller 10.5x8x4 y 4S, que consumo de corriente tiene, podrias hacer la prueba. Gracias

Hi Mate! I have Radiomaster Boxer and have successfully binded to flysky A8S receiver. I did double/triple rates but can not figure out how to assign gyro on/off to a button. It is currently always on. Any idea?

Is this 1600mm or 1400mm wide?

Hello thanks for the great videos on setup this 750mm mustang my friend and i have too upgrade to the same set-up as your and our planes fly beautifully the mini gyro and receiver work wonderfully since the upgrades i have flown it twice with no problems even flown in strong head winds with no problems thank you for showing us how to make this aircraft fly beautifully 😎👍💯

Nice one, thanks for sharing 👍

So tun als wäre man Anfänger ist nicht in Ordnung.Und das bei dem Flugzeug.Wurde mich schämen

Thanks for this video. FYI you don't have to do 3 mixes like this. Just add the switch you want to CH5 on the Inputs screen then add CH5 on the Mixer screen. The weights are automatically added

👍👍👍👍👍

Is that also in the LBT-Version version Possible ? Thank you for the information !!

Is that also in the LBT-Version version Possible ? Thank you for the information !!

for some reason, it only works in "low power mode".

Hello, I have a radiomaster pocket and don’t have V761 as an option. Does this mean I can’t bind to the plane?

This is a great unbox video. Thanks. Just got mine today and built it up. It's my first RC plane, so I'm looking forward to trying it out tomorrow.

I watched and liked this video 3 years ago when I was just getting back into the hobby and I remember thinking , in time I might be able to do this , I am now flying mostly with my Radiomaster Boxer and pairing it up to various smaller planes, I just came across the video again this eve as I await delivery of a Radiolink R8XM and a Byme-A V.2.0 . Ready to fit to a Kootai Ki84 I wouldn't be doing this without being inspired to go for it by guys like you making theses videos thank you so much.

I see how you added weight, but do you think sizing up the tires would help get cg forward and grass landing/takeoffs?

Hi, what is your CG value?

Does this plane have a steerable tailwheel?

Thanks, you really helped me understand what I'm getting with that flight controller

Does this have a gyro installed

Do you have video, mounting the new gyro, settings, etc?!

Hello. Can you tell me where is CG located?!

Brilliant video, I can knife edge my warbirds just about. One problem I have 3 planes 2 x bf109 no problems at all but my p51 worked great for one flight then the next I had no throttle.. switched it back to its own transmitter and it worked back to boxer and no throttle again?

Hi there, We flew two of these today for maiden, but we had to stop. Both planes had extreme vibrations on 4s, starting at half throttle and up. Props are perfectly balanced. Your Trainstar sounds also like it is extremely vibrating at higher revs. I think we need to make the nose/motormounts much stronger. Did you do anything about the vibrations?

Hey blowey, where have you been lately? Hope all is well.

Nice flying mate, im getting this jet after seeing this review, good to see you have a park in Australia you're actually allowed to fly, where i am in nsw there's signs at every park saying no rc airplanes and cars so im restricted to the beach and one high school on weekends 😂

Can i fly it with xk a430's stock digital transmitter which looks similar to A220's transmitter ?

Nice colour !

Three years later and still absolutely relevant and useful.

Hello, This wing connector is a brass tube, it should be 32cm. It is shorter. 13cm for the left wing and 13cm for the right, the fuselage is 6cm. I tried to buy it but the diameter of this tube is non-standard, it is 7.9 mm. Standard tubes for RC models are 3,5,6,7,8,9,10 mm in diameter. Best regards.

I set mine up ok, but I don't see where you can adjust the gain.

THANK Sssssssssssssssssssss! Thank you! Greetings. THANK YOU for THIS very helpful recording! Dziękuję! Pozdrawiam.

Buenas, gracias por el video de la construcción, me parece muy útil. Una pregunta, qué configuración usaste? (Motor, variador y hélice)

Hi. I followed the steps and it didn't work for me. All the gyro setups worked. Have you actually tried this in flight?

Is it possible to set up the stunt button and lost model alarm too?

I don't have this issue but the wires to my motor are faulty and it turns off randomly. No help from support because of their 30d "warranty" (I'm used to 2 years in Europe). Looking for some help before I break something 😬

My T400 reads a voltage lower than the actual voltage. Consequently, one of my LiPo batteries caught fire while charging due to being overcharged. My advice to those still using this charger is to check the voltage per cell (especially 6S LiPo) by pressing the ⚖️ monitor button just before proceeding with charging.

s it also possible with xk a300 via sbus?

Should i get fhis as a first

U r pronounseing decals wrong its Dee-kalz

It's a bit tail-heavy. It likes to fly a tad nose-heavy. Once the CG is perfect it flies like it's on rails.

Hi there mate, enjoyed the vid and might give the hookle a go. I will follow your top on the landing gear and see how I go landing. Phil

Perfect landing 😂😂😂😂

Exerlent vid I have this very model and want to add flaps this is awsome Sir

Hi couple years ago you used a micro fs receiver on couple of planes just wandering what signal range were you getting putting one in the tempest if range is ok thanks

Nice plane mate❤

Hello. Can you please tell me what kind of varnish the plane was coated with? because I know that most varnishes can destroy the Styrofoam. Thanks in advance for your answer. Have a good day!