How to Replace Driver Side Inner Tie Rod 94-02 Dodge Ram 1500
Вставка
- Опубліковано 22 вер 2019
- Buy Now!
New Drag Link from 1AAuto.com 1aau.to/ia/1ASTE00214
In the video, 1A Auto shows how to remove and replace rusted, worn, clanking, groaning, or wobbling inner and outer left tie rod with adjustment sleeve. The video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01, 02, Dodge Ram.
This process should be similar on the following vehicles:
1994 Dodge Ram 1500 Truck
1995 Dodge Ram 1500 Truck
1996 Dodge Ram 1500 Truck
1997 Dodge Ram 1500 Truck
1998 Dodge Ram 1500 Truck
1999 Dodge Ram 1500 Truck
2000 Dodge Ram 1500 Truck
2001 Dodge Ram 1500 Truck
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oqK/1AXAA00013
• 15mm Wrench 1aau.to/oex/1AXAA00010
• 17mm Wrench 1aau.to/oex/1AXAA00010
• 21mm Socket 1aau.to/ohs/1AXAA00043
• Side Cutters
• Slip-Joint Pliers
• Torque Wrench 1aau.to/okd/1AXAA00044
• Rust Penetrant
• Hammer 1aau.to/oeF/1AXAA00091
• Measuring Tape
Subscribe: / @1aauto
Check out our playlist:
Dodge Ram 1500 1994-2002 2nd Gen: • Dodge Ram 1500 1994-20...
For More Info visit us at 1aau.to/h/bSF/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Doing my entire front end next weekend I love all these great videos you make it seem easy
Thanks, I will have my sons veracle up and running in no time.
0:31 what's a verical? Lol
Do the joints come greased up? Since some joints have the nub to fill up grease in
Amazing my 1996 does not even have that and doesn't even have the shock going from side to side on there so I must have a one-of-a-kind
Came here looking for the torque procedure for fastening the ball joints on these tie rods, 14:01 answered it i guess ... Lol
I tightened my tie rod to 65 ft lbs and the castle nut went down so far and the cotter key is above the castle nut and not holding the nut. What did I do wrong?
What’s the part number for the whole unit for 01 Dodge Ram 1500
You do you Boo boo 😂
Is that vehicle a 4 wheel drive???
+Nathan Pierson Yes, it is. This part 1ASTE00214 will only fit 4wd models.