How to Replace Fuel Pump 1994-02 Dodge RAM 1500
Вставка
- Опубліковано 27 лип 2024
- Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU00287
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 1994-2002 Dodge Ram.
This process should be similar on the following vehicles:
1994 Dodge Ram 1500 Truck
1995 Dodge Ram 1500 Truck
1996 Dodge Ram 1500 Truck
1997 Dodge Ram 1500 Truck
1998 Dodge Ram 1500 Truck
1999 Dodge Ram 1500 Truck
2000 Dodge Ram 1500 Truck
2001 Dodge Ram 1500 Truck
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oAk/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench 1aau.to/ohM/1AXAA00010
• Air Blow Gun
• Ratchet 1aau.to/oCv/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oAa/1AXAA00015
• Torque Wrench 1aau.to/oqS/1AXAA00044
• Gloves 1aau.to/odx/1AXSS00048
• Paper Towels 1aau.to/oeo/1AXSS00035
• Rust Penetrant
• Safety Glasses 1aau.to/ocz/1AXAA00343
• Brass Punch
• Floor Jack 1aau.to/oiF/1AXAA00068
• Jack Stands 1aau.to/ohS/1AXAA00065
• Pick 1aau.to/ofz/1AXAA00037
• Rubber Mallet 1aau.to/oaB/1AXAA00413
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
My fuel pump didn't co.e with a harness
I was told I had a filter with the fuel pump is the screen supposed to be the filter or what and $200 is a little high what is your price
If I buy the fuel pump from you how much would it be? Reply please
Just did this and it worked great!
Symptoms I had:
Long crank eventual start on 2nd or 3rd try
Loss of power
Loss of acceleration
Intermittent fuel loss
Crackle/pops
After new pump installed:
Fires up right away first try every time
Truck drives like a dream
Quick fast acceleration
I dropped the tank from the ground but my truck does have a 5 inch lift and 35 inch tires on it. If you have an extra hand it will definitely come in handy. I used my jack to relieve pressure on the tank to get the straps off
So satisfying to see someone work underneath a car the way they actually look :)
Thank you so much for actually taking the time to show us how to do it from start to finish, Very much appreciated bro!! Your one of the good guys👍🏻
More on Dodge Rams- Take note of the position of the old fuel pump before removing, and install the new one in same position so the gauge float doesn't hang up.
With the old pump out, empty the tank. It may have water and sediment left in it that can ruin the new pump.
If the plastic fuel line has a foam wrapping be sure to reuse or replace it otherwise the fuel line may rub on the frame rail or the underside of the bed.
The black valve is a vent/rollover valve. It vents the tank to the evap canister through the black hose.
The smaller black hose on the metal filler neck aids in filling the tank. It acts like a vacuum break.
The metal filler neck also has a rollover/anti-siphon valve in it.
Don't overfill the tank when refueling. You can cause raw fuel to travel through the vent valve and saturate the evap canister, which will lead to the charcoal in the canister to be sucked into the purge valve near the engine. Tanks for the video.
I've seen alot of maintenance videos on UA-cam and you nailed it! This video is extremely informative and in-depth, not to mention the little tips here and there to make it easier
The way I do this is. I loosen the four bed bolts. And Jack the bed up from the front end. Gives enough room and easier in my opinion
I'm doing this on the ground with a regular car jack wish me luck I'm having trouble lifting it up so here goes
It's been 4 days so we're guessing it fell on you... R.I.P.
How did it go I’m about to do the same thing
Thank you for the info dude I'm fixing to put a fuel pump in my truck this morning
I’m doing this as soon as your part arrives. I’m going to be honest your part was about $80 cheaper than autozone and comes with this video! What a deal! Luckily for me I took my bed off. All I got to do is follow this to install the new one in and then figure out how to put the bed back lol. Wish me luck!
Thank you brother this is what I needed I just got the tank dropped and I using your video for reference the entire time! UPDATE: Got it fixed and now she's purring Thanks again brother.
+Byrl May Thanks for watching our video! 1aau.to/m/Shop-TRQ
Can you show me how the fuel pump goes together
Can you show me how the fuel pump goes together
I fuel pump is all apart can you show me how it goes together
Always a concise to the point yet thorough video. Nice job! Thank you!
Dude you make this look so Easy,I will be doing mine on a 2002 Dodge ram 1500 after watching this video 👍
always posting amazing videos TRQ you have helped me and my 2nd gen ram 1500 for the last two years!
Hey when I put my tank back up, I can't find the evap hose. Anyone have this issue?
Absolutely beautiful video great job explaining abd showing step by step and explaining why as you go according to efficiency and safety
Best video I’ve seen for installation!!!! 🤟🏽👍🏽
When you put the new locknut on (manufacturers highly recommend replacing the locknut and gasket), you'll want to use a spanner wrench, then you won't have to bash it on. You can borrow one from an auto parts store.
wow in these videos they do a nice job , and also they make things look sooo easy , these videos are sooo very very very useful , thank you .
This is one of the best instruction vidios out there Thanks.
A mechanic that sounds like a chef
good videos i like the way you explain every little thing. thanks a lot.
His vids are always A1
I have a 1992 dodge ram 250 van would this set up work on my van? Thank you so much for taking the time to help us out.
I think it's going to be easier to cut a hole in the box than remove the tank.
And of course they are calling for 1 - 2 foot of snow tonight.
Thanks for the video, l learned more about the pump location on my plow truck.
I have a 99 dodge ram Laramie SLT with a 5.9L magnum v8 appart from replacing the fuel pump would it or is it ok with replace the fuel pressure regulator instead of replacing the fuel pump?
Great job very well done. Thanks for the video.
Not sure why you didn't remove any gas that may be in the tank and clean the tank out. Otherwise, great video with complete explaination.
+Phil Neathway Thanks for watching the video! This would be good to do if there is any debris in there or for just a general maintenance procedure. 1aau.to/m/Shop-TRQ
I would like to say although my SLT 4.7 Magnum was a little different but man wouldn’t have even got there without ya
Are trq fuel pumps good how long can they last?
😆😆 he said hookie doo's. Thank for the advice and the laugh👍
Thanks for all the details that you navigated us through. Just a question though. Shouldn't the gas tank be flushed of any trash that may be accumulated inside the tank over years. Thanks.
7:17 the part called for this hole is the “Fuel Rollover Valve” right?
Yes
Nice 👍 easy and simple,
7:22 What if your fuel send unit does not have that hole ?
So in your video, the connector piece that has the red clip was not damaged, but do any of you have an answer on what to do if it is or how to solve that issue
Good job
+محمود شبيب Thanks for watching our video! 1aau.to/m/Shop-TRQ
I purchased a pump for my 95 dodge dakota, 3.9, its a five"round"pin, I need the 4 flat pin like you have, its identical to the original one that I'm trying to replace.
+bullheadedoldtimer Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
So I have a 02 ram 1500 5.9 L. The fuel pump is fine but one of the electric connectors is coming loose causing the fuel pump to stop working. I've heard this is a common issue with these trucks. Do you have any idea of the problem?
at 3.25 is the black hose removed a vent hose? Or a vent rollover valve?
The valve is a rollover valve but it also vents the tank. The hose attached to it connects on the other end to the emissions evap. canister. And btw, there is also another rollover valve located in the filler neck. Some call it an anti-siphon valve.
My fuel economy is really bad and getting worse, would you suggest that by replacing the fuel pump it would help gain fuel economy again? Thanks
Could someone help me by telling me where i can get the rubber o ring that the fuel rollover valve at 5:20 please
Thank you 😊
good tutorial
Do the 1994-96 models have roll over valves. Everytime i search for one it says it doesn't fit
I did one on a 92 dodge Dakota and I just took the bed off the truck and changed it in 20 minutes. Can you not do that on a 98 Ram 1500?
That what i did on my 1999 dodge ram . faster , no crawling around if you don't have lift ,same on 06 Silverado . i have done 6 in day . at 300.00 . at my brothers garage .He got lift but taking bed off is faster , I just raise it enough to work on it , stick the new one in , yes it better and faster
How do you know if it's your fuel pump or fuel pump module?
These Rams are all module
What is the black thing on the top left of the pump that goes to the EVAP line what's it called
will this work on a 2004 ram
Holy S that thing is crusty! Not an ounce of undercoating on my '95 and it is perfect underneath. Reminds me why I am glad I don't live in the rust belt
Kinda looks like mine. I think mine is a bit better though
Anyone know the location of the fuel filter on the 2002 Dodge Ram 1500 4.7?
I ordered a fuel pump and it didnt come with the gasket or the plug it just came ith satin paint?
What happens if I made eye contact with him while watching his video is he still gonna steal my soul? Asking for a friend
I have a problem where I have power at my plug but when I plug in the adapter I lose power and the pump won’t kick on
jesus the rust
Thats nothing, every once in a while I run across a tahoe or 4 door chevy truck that rust accumulated in the crossmember that holds the strap, nothing makes you feel more alive than having to cut rusty straps off, and fabricate new attachment points, because you already cant get the tank back in, and your boss told the customer it would be done by noon. 100% why I quit being a mechanic. Book time only works if the car isn't a rusty pile of crap.
Can I use a universal fuel pump
You forgot to mention anything about the fuel level sensor):
what size socket required for the forward knot and bolt
hookeydoos.. love it
It’s easier to take the bed off then drop the tank. But good video
7:53 You'll never know your fuel level again because you didn't install the float level indicator?
It's at the backside of fuel unit.
can anyone tell me whats the name of the smaller hose at 10:45 .I know the bigger one is filler neck hose. thanks
it is a vent hose
The smaller hose attached to the metal filler neck aids in filling the tank. It is not a vent hose. It works similar to a vacuum break.
👍
I just replaced my fuel pump, and it's still not starting, and thr little button to release thr pressure, there's no pressure building
Check your fuses or relay if not then eletrical issue can be a pain to look for
i replaced my pump and its still not enganging when i turn my key
what is the hose @ 3:32
Looks like that truck ready to break in half
Could I remove the bed?
Going to get my truck now I caved and took it in i dont take anything in but iam on the road and been scrrwing arpund with it sometimes 9 hrs a day remember on the road so past couple months its ran good then bad. So I really got to know my 95 ram318 these crooks want To charge me 1200 plus tax so about 1400 to do a fuel pump .i said to the guy 6 fkin hrs to drop a tank. Change. Pump and put it back up what are you guys doing this. Well battling off crocodiles riding sharks with fking swords man o can do it in a parking lot half the time
Couldent you just remove the bed?
That's how I did mine
where is the fuel filter?
So is that the fuel filter I didn't find it outside the tank I am really hate hate hate dodges
Muchas gracias amigo.
Tu video fue de gran ayuda!
Oops! I broke the fuel line into regulator🤦♂️
Old rockauto videos
geekeo
Quit using chrome on impacts geez
So thats what Iam going to do thats a lot of beer money and more
Good video man but is that kinda detail needed or is that protecting your self. Im just thinking anyone tackling a job like this you either are knowledgable or you probably wouldnt be doing this at all i could be wrong to just me being a Dick I guess but well done anyways