Gen3 Hemi & Hellcat Swap Basics

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 51

  • @chuckhooper5215
    @chuckhooper5215 11 місяців тому +1

    I watched your first video and said that exact thing on how assuming this guy is we know all this stuff LOL . Now watching this and you connect all the dots. I feel bad mentally assigning you all this responsibility to educate us all on this crazy hobby. Taking the time to do such an informative video. I’ve had a 70 satellite sitting in my garage 30 years with no engine . I think I may attempt this job after watching your video. You should offer a consultation fee for engineering assistance.

    • @HouseofMouseRacing
      @HouseofMouseRacing  7 місяців тому

      Just want people to enjoy their cars. Doesn't take much, but it can be overwhelming

  • @ronlucci465
    @ronlucci465 4 роки тому +10

    I appreciate you putting this up. Im currently doing a hellcat swap in my 1970 GTX. making some good progress. I learned some things here, thanks!

  • @erichuff2538
    @erichuff2538 6 місяців тому

    Dude. If I hit the lottery ima bring my 70 cuda to you. You know your stuff. Great video. 👍🏻

  • @YLegalRacing
    @YLegalRacing 3 роки тому +3

    I'm looking to do a trackhawk swap and this is freaking awesome!

  • @trentdawg2832
    @trentdawg2832 2 роки тому

    Very similar to my lsa swap in my nova….looking 👍 good

  • @TheGaragenousZone
    @TheGaragenousZone 2 роки тому

    Super informative video! Thanks for all the info. 😄👍🏻

  • @goosseperformance1444
    @goosseperformance1444 4 роки тому +1

    thanks for all the great info but couldnt find that pig tail for aux pump on Mopar performance

    • @HouseofMouseRacing
      @HouseofMouseRacing  4 роки тому +1

      Mopar performance wiring harnesses has end built in. If not running mopar harness but using factory pump i think Rock Auto carries end. Check Gen3 swap. Someone posted part number recently

  • @oliverforsyth3411
    @oliverforsyth3411 2 роки тому +1

    6.4 SRT jeeps are wrecking for 10k AUD trying to figure out what I'd be able to swap them in very cost effective compared to some LS combos to get the same power here. Thanks for the info

  • @horsefly1020
    @horsefly1020 2 роки тому

    I need one of these for my 89 conquest.

  • @johnmacias01
    @johnmacias01 3 роки тому +1

    I’m currently finishing up a Hellcat swap on a 2016 Dodge Charger. This is good information

  • @johnsmith-qz4bv
    @johnsmith-qz4bv 3 роки тому

    great video ...

  • @macwhitcraft3242
    @macwhitcraft3242 2 роки тому

    Info on the electrical master cylinder?

  • @taylorasbell7074
    @taylorasbell7074 4 місяці тому

    I'm doing a Gen 3 swap into a 72 duster, at the research stage and am considering an auto so my wife and daughter can also drive the car, I was going to use the holley terminator for engine management but it won't support a computer controlled transmission, how are you managing the 4l80e? And if I buy a 392 engine and auto what would you use to control the trans

  • @laautomotive8328
    @laautomotive8328 Рік тому

    Where can I get a sternal harness

  • @expressogino3971
    @expressogino3971 2 роки тому

    Nice build. Questions... why the nuts on the pan bolts? How did you cut the block for the starter clearence?

    • @HouseofMouseRacing
      @HouseofMouseRacing  2 роки тому

      The nuts were a cosmetic touch. Cut off wheel or grinder works

  • @nitewatch2.027
    @nitewatch2.027 2 роки тому

    Would love to swap a hemi into my 2001 ram van,, not necessarily a hellcat ,, maybe a 6.1 or 6.4

  • @DreRasing
    @DreRasing 3 роки тому

    You can not drive the original fan with the original ECU?

  • @mascotgraphics
    @mascotgraphics 3 роки тому +1

    Hey Paul... just and FYI, Derale has a PWM fan controller, do you think that would work with the OE Hellcat fans?

    • @HouseofMouseRacing
      @HouseofMouseRacing  3 роки тому +1

      Not sure. Something new.

    • @mascotgraphics
      @mascotgraphics 3 роки тому +1

      @@HouseofMouseRacing They've had it for a while... they use a puck for a heat source on the radiator, but I'm sure they could use some other 'variable' source to activate it. www.streetmusclemag.com/news/testing-derales-pwm-fan-controller-no-more-shocking-the-system/

  • @Lilyote5.0
    @Lilyote5.0 3 роки тому

    I have a 79 little red express that I’m trying to do a GEN 3 hemi swap 545 RFE and the Mopar performance standalone wiring kit having trouble with the install because of the transmission is a full electronic transmission need a TCM or a way to make this work if you could please help me out and maybe shed some light on this I really would appreciate it

  • @donaldsonjeoboham8759
    @donaldsonjeoboham8759 3 роки тому

    Thanks for the information, maybe the dodge swap stuff is still to new too, so any Information is great. Is hellcat valve covers a must?

  • @laautomotive8328
    @laautomotive8328 Рік тому

    How can I get hold of you buddy I have some questions

  • @hoodiekeem6228
    @hoodiekeem6228 2 роки тому

    Did you say by chance that you were using tti motor mounts?

  • @holysmokes9813
    @holysmokes9813 3 роки тому

    Hey Paul, I'm installing a hellcat crate engine in a 70 cuda, I have 1 question are you using a factory hellcat fuel pump? If not ,then what?... I see aeromotive has a hellcat swap tank, but can I still use the fuel pump control module to run the pump speed? & With the Mopar harness? But then I still have to run a return line, correct?

  • @payosolis23
    @payosolis23 2 роки тому

    Quick question, doing a hellcat conversion on my ‘93 d150, can you not use the hellcat transmission?

    • @HouseofMouseRacing
      @HouseofMouseRacing  2 роки тому

      You can use any trans, you'll just have to make mounts. I use 4L85E transmissions for over 5 years now. It's was the only automatic trans that you could get a controller for. Now several companies coming out with them.

  • @aahauling2976
    @aahauling2976 Рік тому

    I’m getting flashing on my shift while driving. With a 392 hemi swap in a 66 New Yorker what am I missing to drive without shutting down?

    • @HouseofMouseRacing
      @HouseofMouseRacing  Рік тому

      No idea. Too many variables. What trans, what controller. I only run hellcats with 4L85E transmissions.

  • @tonyfernandez1957
    @tonyfernandez1957 2 роки тому

    How did you swap the gen 3 dash into the charger?

  • @cartersgarage392
    @cartersgarage392 Рік тому

    Question, I'm working on a 392 and installing the swap oil pan. I noticed the little rubber tab that hangs down from the rear main seal housing o-ring looks to be ripped or pulled out. Usually, I just shave this flush with the block anyways, but this one looks to be maybe damaged. If it is damaged, will it leak oil or can I just use some RTV to fill it in?

  • @Lilyote5.0
    @Lilyote5.0 3 роки тому

    What transmission are you using

  • @novjoel8693
    @novjoel8693 3 роки тому

    Would hellcat swapping a 4th gen ram be plug and play?

  • @vincentking8267
    @vincentking8267 7 місяців тому

    I hate all the Bouchillion performance references. I spent $8k on a motor from him a long time ago, and had to fight with him for months to get everything i ordered. Neglected to communicate with me on where things were, then turned out his hush hush was to prevent me from finding out who did all the work, and i could've gotten everything for almost half price. Dude was scum.

    • @HouseofMouseRacing
      @HouseofMouseRacing  7 місяців тому

      I spent over$20k with them over the last 6 years. Never a problem.

    • @vincentking8267
      @vincentking8267 7 місяців тому

      @@HouseofMouseRacing that's fortunate for you I guess. My scenario happened around the 2016/2017 timeframe. Hopefully he's gotten better. Had to have to remain in business. I still won't shop with him though.