I’m an old school distributor and carb guy but absolutely love watching you tune and figure out obstacles. One day maybe Santa will get me going down the road to FI. Keep up the great work and look forward to the next video 👍🇺🇸
@@mycosys Get this. I had ProSystems custom build me a carb for my 600hp 385 stroker. It was going lean right at cruise. I called Patrick up (owner of prosystems gives you his number when you buy a custom carb from them) and told him what was going on. He looked my build up and told me to get some ridiculously small drill bit and open up two front idle air bleede's. I'm like do what? For real? So I went ahead and did what he said and I'll be damned if that didn't take care of the issue! I now have FiTech on the engine and it is running well but I honestly dont trust it. I have a new set of matched and flowed injector's sitting here for it because I already know fitech's injectors are junk. I had one stick briefly already after sitting a year. Anyway when the tuner in the video mentioned about the carb, I then understood what that setting was he was messing with lol. I wish a tuner would make a video for us older gear heads that explains what all the various settings and parameter's mean in relation to what we are used to messing with. It's not really that we don't like the new technology (i'm 43 so not really THAT old yet). Some of it is great. It is just much harder to figure certain things out with the electronics. With a carb for example. Oh it's rich at WOT so lets jet it down 2 jet sizes and boom that would have you real close.
When the regular cab short bed comes back out this year a setup similar the that grey truck or one with a Gen 5 3.0 Whipple would be awesome. I'm glad GM brought them back, I just wish they would offer them with a 6.2 and not just in WT trim only.
It don’t matter if it is a mirror or light bulb, anytime you can turn a wrench on your own ride and it makes you happy. That’s a win in my book no matter what.
FYI...for those interested in those Boost Auto towing mirrors, they had an awesome deal during Black Friday last year...I suspect they will do the same this year.
Swap that large white piece of vinyl out for a black piece on your rear window. Black covertly blends in and white is like advertising that you have items in the back that you want hidden from prying eye's.
Great video but I have a 2020 Silverado High Country. 13725 mileage and has a 5.3L 8. Gears. Could I use the same setup? Also beautiful Goldens. I had one and my parents had a few. Best dogs
Hey Jeremy do any of your goldens have a problem with retrieving rocks one of my best friends growing up had a really pretty golden retriever that would stick his nose in the pond and pull out rocks and bring them back to us.
If you're running that hitch even with the receiver i'd flip it over so the long portion is facing up instead of down. Gonna grind that sucker on some pavement sooner or later.
If you want, you can send your old mirrors to me so I can use on my Opel Blazer in Indonesia...'cause mirrors get torn up so quickly here, if they'd fit.
Hay JEREMY great vids man IS there a windows compatible software similar to tunnerRT Pro i can use with 2011 silverado 5.3 obd2 ? mostly as a scanner and digital dash stuff
you need to get a curt hitch if you still have the stock one. also you need to move that BMW back some because it looks like you have way to much tongue wieght.
Those appear to be the "anthracite" upgraded Chevy rims for 2020 RSTs.My truck has them,rims are 785$ a piece.I believe the wheel and rim package upgrade was 3500-4k dealer installed
@@markg1495 they want to you come back to the dealer every time it needs something. They will so far be the only ones that can get into the ecm really.
@@jeeplivion I gotcha. Sounds a bit John Deere-Esque. But no more than usual, I imagine that I crackability won’t last through half of 2021. If the world hasn’t ended yet anyways 🙄
Still blows my mind you don't need a truck license or similar to drive with that trailer and weight only as a safety thing, we can pull/drive a combination vehicle upto 6000kg which in my opinion is stupid considering the poor state here with driver skills...its like people who think they can ride a bike just cause they have a license. Enough ranting.....great video as usual and keep up the hard work
Are you talking about the 7mins15secs out of 18mins? Did you click play then fall asleep and wake up at 10mins45secs? I liked the variety of content myself, even though you seemed to mysteriously miss the majority of it
@@davidmatney8307 ok, treat me like a child and break down the part of your comment that is a "joke" that is flying over me vs. you thinking you didn't get what was advertised in the thumbnail
@@davidmatney8307 Ahhhh, you refuse to explain your "joke", which would be quite easy I assume for someone that understood the "humerous" comment they posted. From here I think it's fair to assume that you will never explain the "joke" to me because it never existed in the first place. Prove me right, or wrong. We shall see
Good luck in LeMullets, I'm rooting for y'all
Yep I got tow mirrors on my 2011 Silverado love ❤️ them
The CTSV looks and sounds sick 🔥🔥🔥
Glad to see the flag I sent to Cleetus is getting some use!
I’m an old school distributor and carb guy but absolutely love watching you tune and figure out obstacles. One day maybe Santa will get me going down the road to FI. Keep up the great work and look forward to the next video 👍🇺🇸
That stuff is pure black magic and voodoo, i swear you guys pluck chickens for a tune ;)
@@mycosys Get this. I had ProSystems custom build me a carb for my 600hp 385 stroker. It was going lean right at cruise. I called Patrick up (owner of prosystems gives you his number when you buy a custom carb from them) and told him what was going on. He looked my build up and told me to get some ridiculously small drill bit and open up two front idle air bleede's. I'm like do what? For real? So I went ahead and did what he said and I'll be damned if that didn't take care of the issue! I now have FiTech on the engine and it is running well but I honestly dont trust it. I have a new set of matched and flowed injector's sitting here for it because I already know fitech's injectors are junk. I had one stick briefly already after sitting a year. Anyway when the tuner in the video mentioned about the carb, I then understood what that setting was he was messing with lol. I wish a tuner would make a video for us older gear heads that explains what all the various settings and parameter's mean in relation to what we are used to messing with. It's not really that we don't like the new technology (i'm 43 so not really THAT old yet). Some of it is great. It is just much harder to figure certain things out with the electronics. With a carb for example. Oh it's rich at WOT so lets jet it down 2 jet sizes and boom that would have you real close.
Love the message at the end.....only the Patriots will get it. 'MERICA
Sweet upgrades Jeremy! 🇺🇲 👍
awesome episode, im rooting for you in lemullets!
Put a set of those mirrors on my motorcycle. That way I could see around my mother in law next time she asks for a ride.
😂💀💀
Fasterproms 2020 🤘🏼😡🤘🏼
When the regular cab short bed comes back out this year a setup similar the that grey truck or one with a Gen 5 3.0 Whipple would be awesome. I'm glad GM brought them back, I just wish they would offer them with a 6.2 and not just in WT trim only.
I bought the same hitch last week! I love it
It don’t matter if it is a mirror or light bulb, anytime you can turn a wrench on your own ride and it makes you happy. That’s a win in my book no matter what.
Been supporting yall from day 1!!
Great video. I enjoy the longer ones with all the details!!!
Good luck at the race gentlemen. Give them hell.
Thanks for the carburator reference Jeremy. I knew exactly what you were talking about. 😁👍
Loved the video Jeremy
That 2020 is so badass. I want one just like that
I just got a curt adjustable hitch. It does lift or drop with no tool adjustment.
FYI...for those interested in those Boost Auto towing mirrors, they had an awesome deal during Black Friday last year...I suspect they will do the same this year.
also looking at tow mirrors for my 2500 8.1 suburban, it needs them bad, can't believe you were towing that big trailer without them.
Great up load love it .but we need some awd s10
I'm very suprised you don't have a load leveling hitch, especially with the new trailer and tongue weights.
Was thinking of beefing up my 2020 5.3.....yea changed my mind 🤣🤣 great video btw just subscribed 👍🏻
for a steel open trailer this TEXAS PRIDE Trailer is the nicest looking trailer on the open road today period TEXAS PRIDE TRAILERS you guys win
I had read that hp tuners had no plans to support the 20+ Bosch TCM. Has that changed?
Yeah Buddy 🔥❤️👍🏽
Swap that large white piece of vinyl out for a black piece on your rear window. Black covertly blends in and white is like advertising that you have items in the back that you want hidden from prying eye's.
Need to flip that hitch over. Having the adjustment going down and being so low I know it hits the ground going in and out of places
GM has a TSB on the valve springs in the 2020 6.2
Awesome video!
LSDahhh I love that cts v plate!!!!!
I would want absolutely no one else to be able to claim “most powerful 20 Silverado”. This made my damn day
Oh boy I want my 2019 Sierra 6.2 to make that kind of power.
awesome video! that Ctsv was Gnarly!
Are we going to see more out of this truck ????????????????????
You can't get a good reading on the afr sensor is in the tailpipe with the cutouts open
Whats does that pro charger set up cost all installed by you if I ship you my truck
900 dam stock bottom end I thought I heard....and that truck is flying for what it is
Different fuel ratios in the dyno than the street? Dieselgate style?
Fuel pressure regulator restricted or do you need a higher psi fuel pump 🤔
I have a 2500 Express van and I want those mirrors.
Once you have the door panel off you may as well put some Dynamat or something in there and a fresh out of pioneers
Great video but I have a 2020 Silverado High Country. 13725 mileage and has a 5.3L 8. Gears. Could I use the same setup?
Also beautiful Goldens. I had one and my parents had a few. Best dogs
Yes.
What tune are y’all using I have a 2020 rst and having problems getting a tune pls let me know
hey sri ! what the wheel and the tire size you have on the truck ?
How much did this whole thing cost I have a 2021 trying to do the same
Hey Jeremy do any of your goldens have a problem with retrieving rocks one of my best friends growing up had a really pretty golden retriever that would stick his nose in the pond and pull out rocks and bring them back to us.
I have a mutt that brings back bones, he almost brought the whole cow home
Norman for President 2024
has george removed his tRump 2020 sticker from his truck yet? lolol
Never seen a Golden roll!
Now let's put a blower on my '21 6.6L and see what we can do.
Should call that truck Cartman, cuz it'll kick you in the nutz 😂
Jeremy and Cooper for the W at 2.4hrs of Lemullets
Did you gap rings
Does it still cut off at 99mph?
have ur son got a youtube page with more of his drifting ?
If not, make one for him.
Pretty sure he has one and he made it last summer look it up
If you're running that hitch even with the receiver i'd flip it over so the long portion is facing up instead of down. Gonna grind that sucker on some pavement sooner or later.
If you want, you can send your old mirrors to me so I can use on my Opel Blazer in Indonesia...'cause mirrors get torn up so quickly here, if they'd fit.
Hay JEREMY great vids man IS there a windows compatible software similar to tunnerRT Pro i can use with 2011 silverado 5.3 obd2 ? mostly as a scanner and digital dash stuff
How much would it cost to do this to my 2017 silverado 6.2
you need to get a curt hitch if you still have the stock one. also you need to move that BMW back some because it looks like you have way to much tongue wieght.
I believe its the 6.6 its capible of 1400 on 110 fuel
Raise hail praise Dale
Nice
can you do this for a 2018 Ram 1500?
Did you purchase a tattered speedo for Squirrel yet?
Hard to believe they make a trailer that big bumper toe and not have a stabilizer hitch or something on it
Anyone know what those wheels on the silverado are? I really want those for my 2021 High Country.
Those appear to be the "anthracite" upgraded Chevy rims for 2020 RSTs.My truck has them,rims are 785$ a piece.I believe the wheel and rim package upgrade was 3500-4k dealer installed
@@jaydoublebusy thanks for the response. I'll check into them.
Any idea what lowering kit is on that truck?
IHC suspension
@@HouseOfLasers thanks. It looks like it sat a little taller than the IHC. But that’s cool
Great video as always!
What is the price for setup and tune? 2019 year model.
Tune alone your lookin at around $1,000.
How many miles is on that thing?
That trans in the Silverado was shifting like poop...
I thought that trailer was a pintle hitch?
that red on that cts-v makes my red cts-v ugly =-( , that car looks so good.
There’s an email floating around from HPtuners saying that that 2020 and up TCM’s “may never be supported”
I've heard that there's military grade encryption in their software, good luck going through that if it's true.
@@jeeplivion why thought? Why are they trying so hard to keep people out of them?
@@markg1495 they want to you come back to the dealer every time it needs something. They will so far be the only ones that can get into the ecm really.
@@jeeplivion I gotcha. Sounds a bit John Deere-Esque. But no more than usual, I imagine that I crackability won’t last through half of 2021. If the world hasn’t ended yet anyways 🙄
@@markg1495 yes similar but GM has not told the world tough shit yet.
Looks like its wanting to keep kicking you in the cam baring
I always get it in the kunooder valve
I didn't catch it....is it a 5.3 or 6.2?
6.2
Color match the tow mirror caps!!
Can you tune a 2020 4.3 v6?
Silverado
@@gmc__tanner1192 they came with a 4.3 too?
It's plenty fast, but it can't outrun ugly. Face only a mother could love. Like mine.
Was that a 5.3 or 6.2 silverado
6.2
Tighten up your straps on the dyno
I want to use a PPV to swap into my square body truck
Need some air bags now on the tow pig
I officially disqualify your Silverado!!!
Why you ask?
Because it's on METH🤣🤣🤣
Boost the algorithm🤣😂
some really loose straps on that CTS-V dang sketchy
Can you please do a video on tuning bigger injectors with no data!! I’m struggling on mine lol
#Fasterpups
Still blows my mind you don't need a truck license or similar to drive with that trailer and weight only as a safety thing, we can pull/drive a combination vehicle upto 6000kg which in my opinion is stupid considering the poor state here with driver skills...its like people who think they can ride a bike just cause they have a license.
Enough ranting.....great video as usual and keep up the hard work
You have to have commercial driver’s license to pull a trailer rated over 10,000 lbs GVWR so not much different
Man that truck is screaming for air bag helpers
All the dislikes are from the banks after the Silverado owners see this video.
Autoevolution.com used this video and your name in there article about the 2020 Silverado
Cool thank you for the info.
You’re welcome
Thumbnail- *most powerful silverado*
Video- *tow mirror performance*
Are you talking about the 7mins15secs out of 18mins?
Did you click play then fall asleep and wake up at 10mins45secs?
I liked the variety of content myself, even though you seemed to mysteriously miss the majority of it
@@bluebird8004 dude. Please look up as the joke goes over your head
@@davidmatney8307 ok, treat me like a child and break down the part of your comment that is a "joke" that is flying over me vs. you thinking you didn't get what was advertised in the thumbnail
@@bluebird8004 are you really that blind that you dont see the joke? Or are you just trying to defend yourself on the internet?
@@davidmatney8307 Ahhhh, you refuse to explain your "joke", which would be quite easy I assume for someone that understood the "humerous" comment they posted.
From here I think it's fair to assume that you will never explain the "joke" to me because it never existed in the first place.
Prove me right, or wrong. We shall see
Check out Truck Master's website/channel for GM and Duramax ideas/parts etc. He has some good products that might work for you.
Dame where is the engine
Ask brent