Just thought I'd mention that the white paper/board you're holding @5:42 isn't foam. It's actually a plastic sheet you can stick to the bottom of the case (it's like a big sticker, you can peel away the white paper attached to it). The purpose I believe is to protect your PCB from accidentally shorting out by touching the aluminum case. I also got the purple M1
What key caps should I purchase? Just bought it and didn't know I had to mod this up haha hoping you could create a video as well for just installing the stabilizers
its really important. It makes the switches sound better, and feel smoother. If you don't lube the switches, then your jkeyboiard is mostly going to sound really bad.
It depends: if switches are factory lubed (and nowadays most are) doing another lube may be not necessary if not dangerous for final results in case of excessive lubing. If switches are not factory lubed (ex cherry switches usually are not), lubing will enhance sound and feeling a lot, but it's a long and tedious journey.
Ohh, My camera angle is a bit odd , To tune the stabilizer wire. Some time those wire are bending a little bit. It will make your keyboard's space bar, enter, backspace or shift some tick noise.
Thanks! This is super helpful! All the best man 👌💯
Just thought I'd mention that the white paper/board you're holding @5:42 isn't foam. It's actually a plastic sheet you can stick to the bottom of the case (it's like a big sticker, you can peel away the white paper attached to it). The purpose I believe is to protect your PCB from accidentally shorting out by touching the aluminum case. I also got the purple M1
Yeah, As I didn't know it first but I peeled it off and stick it in the case XD
It’s still a bit confusing on how to make it since I never done anything like this before
You should build one.
This video is so helpful! Tysm
turned out really nice!
What key caps should I purchase? Just bought it and didn't know I had to mod this up haha hoping you could create a video as well for just installing the stabilizers
Thanks for the video! I noticed you removed the black foam between the PCB and the poly plate. How come? Is it better for the sound?
I have the keyboard right now and I'm pretty sure it's because of the installation of stabilizers
Sounds decently creamy 👌
Been trying to find a step by step on how to build one of these.
Now you got ...
keep it up! love it
Hey, I know this video is so old but what is the app and what is it for in 7:14 . What are doing with the stabs there?
He is balancing the wires
That wrist rest is so cool. Where did you get it and what is it called?
I think its Nuphy transparent wrist rest
nice
What switches and keycaps did you use? Do you have a list of the specs?
It's Gateron Yellow Pro.
Keycaps are from AKKO.
I don't remember the name.
@@kalouk2 THANK YOU SO MUCH
Thanks for the video! How to remove the encoder?
Just pull it of ha ha
@@kalouk2I figured it out myself later)
Is the M-one stab v2 suitable for monsgeek m1. Thanks you.
Yes
hey, i just wanted to ask if that switches lubing is important to do, or i dont have to do it
its really important. It makes the switches sound better, and feel smoother. If you don't lube the switches, then your jkeyboiard is mostly going to sound really bad.
It depends: if switches are factory lubed (and nowadays most are) doing another lube may be not necessary if not dangerous for final results in case of excessive lubing. If switches are not factory lubed (ex cherry switches usually are not), lubing will enhance sound and feeling a lot, but it's a long and tedious journey.
7:30 what were u doing
Ohh, My camera angle is a bit odd ,
To tune the stabilizer wire.
Some time those wire are bending a little bit.
It will make your keyboard's space bar, enter, backspace or shift some tick noise.
what did you use for the holee mod? tape?
You can use bandit but this is the tape available in my region which is transparent.
@@kalouk2 oh okay thank you
Probably got the purple because there’s no other color available
Which keycaps are those
I don't remember exactly but it from AKKO brand.
What tape is that?
It comes with the kit
As it come with the kit, and it really nice .
You used no plate foam?
"Promosm"
terrible song choice