Honda/Acura B series 5speed IN DEPTH REBUILD! PART 1

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Complete disassembly and rebuild of b16/LS 5 speed to include adding the LS 5th gear for better freeway crying rpm.
    Replaced input bearing and seal, all new brass synchros. 1st/2nd and 5th/reverse shift forks.
    #b16
    #b18
    #LS
    #TYPER
    #HONDAMANUAL
    #B16REBUILD
    #HONDATRANS
    #GRINDSINTO2ND
    #HOWTOFIXYOURTRANS
    #ROCKAPEHOWTO
    #HOWTO
    #B16
    #HONDAGURU
    #VTEC
    #KSERIES
    #K24
    #MIDDLECLASSBADASS
    #LOBUDGETPIMPIN
    #LS5THGEAR
  • Авто та транспорт

КОМЕНТАРІ • 56

  • @anroiduser1222
    @anroiduser1222 Рік тому +3

    arguably the best video in yt to for topic

    • @MRROCKAPE
      @MRROCKAPE  Рік тому +2

      Thank You! I have lots of experience rebuilding honda manual transmissions from when I worked at the dealership.

  • @brokeasscivic8830
    @brokeasscivic8830 Рік тому +4

    Thanks for actually putting the main shaft back together

    • @MRROCKAPE
      @MRROCKAPE  Рік тому

      I haven’t watched anyone else’s rebuild vids, do they skip that step?

  • @UnitedKingdomRC
    @UnitedKingdomRC 8 місяців тому

    Excellent how to, thank you. I am doing the same gear swap as you but was worried about how hard the synchro swap would be. I’m now confident I can change them all. Thank you 🙏

    • @MRROCKAPE
      @MRROCKAPE  8 місяців тому

      They’re pretty straight forward but do not flip over any of the slider hubs by accident. I can tell a few in the comments didnt hear me and probably junked a tranny after installing it and it didn’t work. 😣

    • @UnitedKingdomRC
      @UnitedKingdomRC 8 місяців тому

      @@MRROCKAPE starting to feel like a novice again, what’s a slider hub? Is that what the gear fork selector moves up and down?

  • @uwkcal
    @uwkcal Рік тому +2

    Nice video bro..

  • @freddygutierrez3531
    @freddygutierrez3531 3 роки тому +3

    This is some damn quality content 👌! Grate detaip an explanation 👏!

    • @MRROCKAPE
      @MRROCKAPE  3 роки тому +1

      Thanks… I have probably done 50 D and B series manual rebuilds back when I worked for the honda dealer…. The carbon synchro’s are a must in a performance rebuild. The trans I did here is a b16(short ratio) 1st-4th with an LS 5th gear set for lower highway rpm

  • @reekodayoungan1104
    @reekodayoungan1104 2 роки тому +1

    very nice my friend, you have taught me a lot!

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому +1

      Awesome… good to hear that I can pass on some knowledge

  • @FroztiProductions
    @FroztiProductions 2 роки тому +3

    Yo this is awesome you're really good at working while explaining. No beating around the bush just working and talking. I'll be pulling an LS from a junkyard but I want a shorter 3rd and 4th, if I find some other b series gears do I only need the actual gears?

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому +2

      You’ll need both the matching main and countershaft gears to interchange ratios. Synchros and bearings are the same. I haven’t come across any issues swapping LS gears in b16 transmissions So Im sure you could put b16 ratios in LS gearboxes

  • @4077661466jp
    @4077661466jp Рік тому +1

    I thought u lived in and around area i just bought a house in which is Leesburg/haines creek area still learning my way around and recognized a area in a video you did not gonna say which one, but much respect to you for representing the Bseries as all my friends have tossed it in favor of kseries, however have been wondering rater the pain staken task of finding a legit b16 trans and the outrageous price along with them, is to swap final drive while leaving everything else as i have a 4door gsr and 16" wheels boy is there a difference between 2dr gsr and 4 door , 4 door feels like im pulling a trailer behind me with the 2 extra doors being pulled along, or swapping first gear for a lower ratio giving more punch from the rest of the gearing? Cant decide and know since seeing this one of those ideas are no longer possible, like the vids bro.

  • @andycruz9962
    @andycruz9962 6 місяців тому

    What's the reason my transmission goes into gears, but when it's supposed to be in neutral, it's still in gear? Shift linkage mechanism? Shift change holder? I need help, B series LS Transmission.

  • @jacobburr4348
    @jacobburr4348 Рік тому +1

    You helped me to thx u

    • @MRROCKAPE
      @MRROCKAPE  Рік тому

      Awesome! I need to find a 6 speed K series trans and do another one of these.

  • @BuiltNoTboughTdc2
    @BuiltNoTboughTdc2 Рік тому

    Very informative, thank you! I drag race my 95 GSR. It became impossible to shift (any gear) on drag strip (high RPM). But on a street it shifts fine (low RPM). It won't grind, it just wont go into next gear until the RPMs drop below 5K. Any idea what may cause it? I just pulled my tranny out...

  • @doyleboggess3791
    @doyleboggess3791 9 місяців тому

    Ion know how you got the clip off but not working that easy for me

  • @jimhiscott2918
    @jimhiscott2918 Рік тому +1

    Unfortunately honda nolonger offers the entire gear assemblies and shift forks anymore. There all discontinued

    • @MRROCKAPE
      @MRROCKAPE  Рік тому +1

      It was bound to happen, I have seen some aftermarket parts but its been awhile since I have done any B series trans rebuilds for anyone but close friends that don’t flat out abuse them hard enough to bend shift forks

    • @jimhiscott2918
      @jimhiscott2918 Рік тому

      @@MRROCKAPE Just tell the B guys to buy up what's still avaliable. Every month something else comes up discontinued. Great video you made my guy. It really helped me out a lot.

  • @richarddiaz8248
    @richarddiaz8248 Рік тому

    Sir how do you know what series I have it from a 2004 Honda accord 2.4 engine

  • @hendersongibbs5615
    @hendersongibbs5615 7 місяців тому

    I have a B series Sq 5 speed box can I use the internal in the k series housing?

    • @MRROCKAPE
      @MRROCKAPE  7 місяців тому

      No they are different and not interchangeable

  • @jamesjackson3293
    @jamesjackson3293 Місяць тому

    Are all B series synchro sets the same? How do I buy a kit for stock B16 1-4 gears with LS 5th gear?

    • @MRROCKAPE
      @MRROCKAPE  Місяць тому

      Id go to synchrotech and double check me but Im 99% sure ls and b16 are the same as far as the synchro are concerned. Buy the carbo ones dont cheap out on the brass ones.
      I believe the itr trans is different

  • @jeremywalker2460
    @jeremywalker2460 2 роки тому +1

    I have a question maybe you can help me out? Is it possible to have a ls trans /w gsr internals ?

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому

      As far as I know all B series trans parts are interchangeable though I have only done the ls 5th gear conversion b16 and a gsr without issue. If I ever decide to start street driving my b16 sc hatch with a itr trans I may put the LS 5th in it. Hope that helps

    • @jeremywalker2460
      @jeremywalker2460 2 роки тому +1

      @@MRROCKAPE thank you

  • @stevenbuell5387
    @stevenbuell5387 2 роки тому

    Getting a p0753 code does anyone know how to fix it?????. 03 Honda Odyssey trannsmission.

  • @shawnward6916
    @shawnward6916 20 днів тому

    Do you use any assemble lube when reassembling? If so, where?

    • @MRROCKAPE
      @MRROCKAPE  20 днів тому +1

      A tiny bit of grease on the input seal couldnt hurt but otherwise none. Use Genuine Honda MTF (or whatever they call it now)

    • @shawnward6916
      @shawnward6916 11 днів тому

      @@MRROCKAPE thank you. I'll be working on j1 (cable b16) Trans and I've been watching your videos repeatedly. Very well done with all the info in the world.

  • @YeseniaLopez-cq9dy
    @YeseniaLopez-cq9dy 2 роки тому +1

    The outer bearing on the main output shaft for Ls do u noe the part#

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому

      Sorry… its best to ID your trans year/make/model and look up the parts on one of the factory parts online resources and order them. I never assume they are all the same part #

    • @FroztiProductions
      @FroztiProductions 2 роки тому

      HondPartsnow.com enter your car and find the part number you can find everything there including torque specs and bolt sizes.

  • @xxmagnonxx1
    @xxmagnonxx1 2 роки тому

    What are the parts numbers of the input shaft bearing and seal? I bought a transmission for my b20 that has miles of input shaft play and definitely need to replace them. Cheers!

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому +1

      I have no idea…. ID your trans year/make/model and take that info to one any of the factory online parts resources and look it up. Assuming they are all the same has bit me once doing an 91 Si d series as there is an early and late input bearing and they are different.

  • @MrNorotic
    @MrNorotic Рік тому

    The new synchros i got didnt include the snap rings. Would it be ok if re used the old ones?

    • @MRROCKAPE
      @MRROCKAPE  Рік тому

      I wouldn’t re-use the rings, they are wear items.

  • @antonior7577
    @antonior7577 2 роки тому +1

    Where do you buy the synchros?

    • @MRROCKAPE
      @MRROCKAPE  2 роки тому

      Synchrotech carbon fiber lined, I have used them exclusively for years with no issues.

    • @slumpedmage
      @slumpedmage Рік тому +1

      @@MRROCKAPE Do they handle considerably more power? Or just last longer?
      How much power, if so?

    • @MRROCKAPE
      @MRROCKAPE  Рік тому

      @@slumpedmage Its just a rebuild with mostly stock parts I doubt it adds any strength, there are aftermarket gear sets that increase strength but I haven’t used them or installed any.

  • @jaylenweatherly8548
    @jaylenweatherly8548 Рік тому

    Just curious will this video work for the gsr trans

    • @MRROCKAPE
      @MRROCKAPE  Рік тому

      Yes… all B series manual trans are the same procedure… the awd cr-v is slightly different but similar enough this will get you through the inspection and rebuild.

  • @slumpedmage
    @slumpedmage 2 роки тому

    I have really sticky in/out of 5th & it will NOT go back into reverse no matter what. running or not. Any idea if this could be anything other than the linkage?

    • @reekodayoungan1104
      @reekodayoungan1104 2 роки тому +1

      mine did the same thing i had to get transmission rebuild

    • @slumpedmage
      @slumpedmage 2 роки тому

      @@reekodayoungan1104 it was the sleeve between 5th and reverse right?
      I still haven't fixed mine. Luckily my 92 EG is super light only had to push it a few times

    • @reekodayoungan1104
      @reekodayoungan1104 2 роки тому +1

      @@slumpedmage yes it was the sleeve. I was leaving work & out of nowhere my car stopped driving it would only rev & it wouldn’t go in reverse

  • @isaaclerma4847
    @isaaclerma4847 Рік тому

    Allergies huh. 😂. Slow down brother. Tranny isn’t. Going anywhere. Good video tho. Lol.