Це відео не доступне.
Перепрошуємо.
Powercords - $40,000 Versus $40. Here's My Opinion!
Вставка
- Опубліковано 15 кві 2022
- For all business related inquiries:
jayaudiolab@gmail.com
if you are interested in a consultation with me to take your system to the next level, email me for further details:
jayaudiolab@gmail.com
#axpona2022
#jaysaudiolab
#highendaudio
#hifi
#audiophile
#gryphon
#homeaudio
#msb
#gryphon
#boulder
Brand new wireless Lavalier. I hope you all don't complain anymore 😂
Dude you’re looking great. Forget audio I’d pay you to tell me what you’re doing for diet and exercise. Real talk 😎
@@Puroplatino hahahaha
@@Puroplatino he looks like Shrek, only better.
@@rickyblair8802 Is that like an insult, only better? Lol
@@Puroplatino i just went back to the gym last week and i genuinely need to know how someone can be suport the life of an ultrahigh end audiophile and also be so healthy.
I would love to know the manufacturing cost of a 12,000.00 power cord.
Lol, me tooo. I am in the wrong business
I call BS. Power cords don't "settle or cook in". The physics of the electrons in electricity don't change, nor does the physics of the wiring. When it's plugged in, its energized and electrons flow. Go ahead and A - B them immediately. If you have terrible power to your home (noise or fluctuations), a 4' cable won't magically fix it. Would these cables change the sound if your system was running at the power plant, running off the source? Change the sound of your system with your home outlets delivering 105 volts coming from them? Have you replaced all the 12 - 14 gauge wiring in your home to something twice, three times as large?
Here's a GREAT video for you to do. Bring in ten people, do a cable comparison of all your different cables, and see if anyone can hear which cable is the Amazon or stock cable. Don't worry about "cooking" them in, because they'd all have the same conditions for the test, and it doesn't matter anyway. Ten cables with one would being the cheap one. See how many people can determine which is the cheap power cable. That would be must see TV.
@@scottwheeler2679 I'd be willing to bet a thousand dollars not one of the ten audiophiles could pick the cheap power cord, unless by luck. Lots of changes make sonic differences in good systems, but power cords are psycho acoustic changes. If you think it sounds better great, but let's have a video of ten audiophiles trying to select (hear) the cheap power cord. While we're at it, let's do the same with speaker wire floor risers. That'll never happen because Jay has a financial interest in what he's selling.
"$40,000 dollars worth of powercords" should never be a part of anyone's vocabulary unless they work in a powercord factory
It's always great when someone has the courage to speak their mind and not just go with the flow, but what you do which that challenges group think. I am extremely happy for what you bring to us in your channel! I agree with everything you said in this video. I would also add that many times when comparisons are being made we sometimes are focused too much on something and it takes several days of listening to truly appreciate what a product has to offer as a whole. For example, I just did a interconnect compare and was focused on the high frequencies only, after several days of different sessions of listening I arrived at different decision on what was best, because I listened holistically to the sound, not just the high frequencies.
I’m guessing Shunyata Everest, just based on my own experience. It was a game changer in my system, leading to a full loom of Shunyata Omega, Sigma, and Delta V2 power chords.
Yes, Denali 6000s v2 w/Alpha v2 xc
Nice one Jay. I think this is your best vid so far. Thanks for putting some very sensible perspective on a (potentially) contentious subject. A good system is something to enjoy not obsess down a rabbit hole-where you can't hear the music anymore.
Thank you so much
Amplifier plugged into wall socket with russ Andrews Mini Purifier SuperClamp beside it ,everything else plugged in AudioQuest niagara 1200 or russ Andrews X Block.The Mini Purifier SuperClamp will sort the noise like fridge lamps computers on the power line.
I build speaker crossovers for my speakers and use alligator leads to experiment with crossover components. But when I had completed the crossover build (without the alligator leads) the crossover sounded different! So much so that I had to change some components. Cables do make a difference. The (cheap) alligator leads are made of iron, not copper and I think that is the problem.
probelm is not in material of aligator leads, but in the aligator clips contacts, so you have some added resistance when using a aligator clips, which affect the crossover filter resonance behaviour.
Also break-in of the components will change!
You are doing the right thing, comparing gear that most people don’t.
Love your channel, keep going mate 👍👌🎼🎼🎼
HUH ? The boulder was reviewed a Shat ton of times . John Darko wrote about the MSB select II in 2015 and the Focals ? You are kidding right ? I guess you guys don't read audiophile rags.
Jay, im new to your channel and absolutely love it. My budget is mid hi-fi, but ive had some great gear. I appreciate living vicariously through your vids. Thank you! 😂
Jay I think you should go and look at your 3050 internal ; if you look at the wiring to and from the boulder 3050 transformers, there is no magic super cable, it’s just plain old wire, the idea that this has no effect but your power cord does, is just magic thinking
I use some nice Shunyata v2 A/C cords on my Focal/Parasound/Mola Mola setup.
It’s not necessary to get good sound, as you proved. However, I do find that it makes a significant difference.
I just changed out my Prima Luna Dac for the DCS Bartok. Before I had through Roon wifi on computer to Apple tablet. I had ethernet hard wired from main cable router. So far I like the Bartok extra detail but it's not dialed in yet. With Prima Luna the singer was more upfront and cymbals in the background. With Bartok I find the cymbals to forward in the staging and singer too far back. I read a bunch of modes on the Bartok to adjust voltage and the phasing and settings. My guy was out of town that helps listen and adjust after install but will come by my place in May to help dial it in. The audio place I use has the main installers put gear in and do small test and then more experienced sales person comes by to dial in.
I'm with you, and I think that power cables make a difference. But in my opinion you are better off getting less expensive cords and putting the money into EQ'ing your room properly. I know that this sounds like some hometheater talk but, the interaction of your speakers with the room makes a huge difference. For years I ran my hifi rig with just room panels and other things you can do to help. BUT, unless you have the perfect build size room along with treatments, you are never going to get you rig to sound balanced.
Every room has peaks and nulls and unless you measure your room and you compensate for the peaks and nulls you are never going to get your rig to sound balanced. Sorry but that's just the way it is.
I recently removed my DAC/Preamp "very well regarded by the way" and installed a different one. One that includes room correction built in. WIth that, I was able to find that my room had a 12db peak at 70hz and a dip somewhere around 120hz. The preamp allowed me to correct for that "to a point" and the sound is the most clear and satisfying bass I have heard on my rig.
I have gone through power cables and with some I was able to hear the differences they made in my rig but what properly calibrating your rig to the room can do is much more than any cable can do.
I recommend people focus and spend their money and energy into EQ'ing your rig to your room. The gains very significant.
Juan, I agree with you 100%. If people saw the response of their rooms especially at bass frequencies they would be shocked. Room treatment and equalization seem to be thought of as not being true to the hobby by the audiophiles. “The simpler the better” is the mantra of many. Simple tone controls could help so many poor recordings that have great musical performances, but no, tone controls and EQ are not allowed in the signal path as they could lose information in the recording. Very few people have anywhere near enough bass trapping. Multiple subwoofer placed around the room can smooth the bass peaks and valleys better that simple acoustic absorbers. But no, subs are not for true audiophiles, let alone 3 of 4 of them. Todd Welti has shown and proven that multi-subs smooth bass response. Why do Audiophiles limit themselves when the best possible reproduction is their goal? I hope Jay addresses this topic someday.
@@Random-kq4pz correct. Most audiophiles don't like to address those issues "at least not in public" and when I first got in this hobby/addiction I was one of those people that didn't use subwoofers and tone controls in my rig. And while I can understand the concerns that some people had in the past with sound degradation happening by installing another piece of gear and routing the signal through it. Now a days you have tone controls and EQ adjustment that is made in the digital domain. Less degradation of the signal if any and the gains of having it surpasses that of not having it. I now have a stereo rig that uses room correction and dual subwoofers that extend my speakers to "full range" and it sounds really good to me and people that hear it. I find that many audiophiles and even people myself "in the past" fight with progress and fail to see and accept that technology is moving forward and that it can be use to our advantage. The biggest things in a sound system are the speakers and the room. Get those 2 things right and everything else will just be icing on the cake.
@@JC.LC. Well said Juan, I agree. Let's not forget how important the source of our music is. The output of the system can be no better than what we feed into it. I will add the source to your speaker and room importance order, these are the big 3.
@@Random-kq4pz off course, garbage in= garbage out.
@@JC.LC. agreed
I think the ultra hi end stuff probably has a power supply that’s not as susceptible to cable variants as lower price components. I have a modest system and cabling makes a difference.
That's the real answer on this stuff. Your lesser system will benefit much more than an Uber system like Jay's.
The power from the home breaker box to the outlet, continuing on to the electronic component, can be no better than the weakest link. That weakest link is probably the wire from the home breaker box to the wall outlet. I don't know about a $9.99 power cord from Amazon, but a high quality 14 gauge power cable should work fine from the wall outlet to the electronic component. Obviously, adding a power conditioner also helps, but no reason to go overboard on that either.
Stay tuned for more!
You are so wrong ......
So your entire house is wired with normal wires but the power cord that comes from your wall - that one needs to be 40k. Would love to see the science on that.
Call me strange, I prefer to hear the difference instead.
@@DaveJ6515there isn’t one - that’s the point lol
@@Sloimer says who? A mister nobody who never heard my setup. Go figure.
@@DaveJ6515 says anyone not entranced by gear addiction and with some common sense.
@@DaveJ6515No,it would be the people who actually test the regular chord and the high end power chord and compare the two and realize there is literally zero difference in eliminating noise or distortion. There are plenty of UA-cam videos on this. Your ears are deceiving you
I agree that cables and power cords matter, but they do not have to be expensive. The wires in the walls and outlets matter too, but they do not need to be expensive either. Good quality, commercial/industrial grade wires chosen carefully can be as good or better than fancy audiophile products, and they can save the hobbyist a lot of money.
What I'm trying to figure out is why a company would make a 20-100k amp, and then ship it with a normal UL rated power cable if it made their equipment sound crappy? Can someone explain why they would do that?
Ever read the owners manual on a high end component?
They often state they supply a cheap cord because they know it will get replaced with something better.
Customers who believe power cables don't matter will use the stock cable (often called a "courtesy cable"). Customers who believe power cables matter will want to pick their own custom cable.
thank you for all you do jay.......God Bless you!
Great video, thanks for doing the cable comparison Jay!
My pleasure
Big believer in power cords. AND cables that match the system. Think that’s why I loved the Nordost Odin 1 power cords with the McIntosh gear I had. The more forward presentation of Odin matched well with the warmer McIntosh. Good video!
Don't believe - As that, " Is the absence of proof ".
@@99fulham99 Proof to who? you?
@@beyondonethousand Belief - Is a state of mind that leads people to believe something -In the total absence of supporting evidence. Get it now?
@@scottwheeler2679 I am saying that the Nordost was a great match to the Mac gear and sounded better vs another brand I had.
@@99fulham99
I get YOU now. You don’t believe in anything, mostly your own self. Go live by yourself.
Loved the video. Jay. The sound is amazing. Thank you and always stay encouraged. Yes, you are truly blessed. Nothing but love for you.
Thank you
Jay, have you ever tried making or have made for you a power cable that uses the same wire that's in your walls? Just wondering. Did you try switching the cables in only one unit at a time to see in which unit a change made the greatest difference?
I own Venom 10 and 12 power cords Venom 8 Power distribution with the Defender protection all from Shunyata. Very pleased.
Thank you for all these videos! All I have to say is you don't have to have a million dollar system to enjoy music... But I really appreciate what you do in us allowing access to products that some of us will probably never have the opportunity to have! What I find unfortunate with some people is that they spend more time listening to their systems than listening to the music itself... Maybe that's why some people in the presence of live performance, seem to find it doesn't sound right... That's why I really wonder if their systems are really high fidelity or just that they fashioned it to their tastes... I presume that there will be as many good systems as there are pairs of ears to listen to them! Thanks again for your good work!
Thank you Andre
Power cords a ALL rely on the same Romex in the walls, and have the same results. The fact people spend more and think the sound changes is absurd and not supported by science.
What happens IN the amp is far more important.
Same with speaker cables. A lot of snake oil out there.
Hey Jay, Great video! You're never going to convince a percentage of people about the differences in audio cables, so keep in mind you don't need their validation or belief in what you *know* to be true. Looking forward to the video you teased about "power"
@@scottwheeler2679 I'd like to know the ratio of god belief:power cable believers.
@@scottwheeler2679 agreed. I'm not immune to suggestion or emotional triggers either. Far from it. And that's even while possessing the intellectual awareness of it, as it's happening.
I've bought plenty of things based on aesthetic when it was really meant to serve a specific function.
I also have AQ interconnects, speaker and a few power cords. Again, I like the way they look. A big fat meaty cable +1 manliness for me. Like Jay's muscles. It all helps quell those human insecurities and if you believe it helps, it probably helps. It's just a jar of dirt though. So there's that.
Can't wait to know what this product is Jay I'm very excited about this one.
The key is not to decide based upon price, you need to decide based upon performance.
If they don’t make a difference in YOUR system, they are a waste of money no matter what ANYONE says.
If they DO, only YOU can decide if the improvement is worthwhile.
It’s all your personal call.
Agreed man
Most good amp manufacturers recommend just using the supplied power cable. If I had the cash to burn I would also spend 200 k just on cables as well those fancy power cables are hard to stay plugged in . There’s no question that you took this hobby into the next level.great video.
At the same time with an extra 200k to spend you could use it to get a full body massage, take some edibles, go on vacation and get your dick sucked while listening to your system and still have 199k to spare. Just sayin
Can take even longer than days or weeks for cables to break in throughly with your system.
Yep
100% agree with everything you're saying here, which I've learned over the last 45 years. Continually learning still!
Awesome
Did I miss something? So, what WAS the cable you swapped on the Boulder preamp? I thought the second presentation was audibly better in many aspects, but mostly on better defined space around the singers, better resolution.
Jay much appreciate you sharing your gear and educating us .Thank you my man your gonna save me some scarce $$
Glad to help
you are correct to do what you do jay , i say check everything you can and decide for yourself if its worth the difference in money .......
I think there are at least 3 factors which make power cables matter; vibrations, interferences and electromagnetic wave interaction with power supply.
Im not a believer Im a KNOWER. Cables absolutely matter. Ive also just learned separating ALL cables and elevating them from the floor giving each cable its own space makes a huge difference. There is no doubt that cables and cable management matter and why not try if your an audiophile and your always trying to get the best out of your system. Word of advise, there is no holy grail at this time for audio equipment, literally every component in the world can be combined in different formulas and each one will sound different.
Cable Nazis are just Fascists
I already made a comment but after the video I wish to make another one. People need humility. How dare people talk shit to you since you have one of the top 1% of set ups around. I’m sure the ones who critique or dismiss things as snake oil generally are the same kinda of people who argue politics on Facebook. Who has time for that? Keep doing you brother. We follow you because we understand you and most of us, myself especially, think you are one of the most honest guys in the audio business. One day I’ll email you and get some paid advice but for now I’m waiting to finish a few things. When it comes to fine tuning I’m gonna hit you up for sure. Cheers from Italy 🇮🇹
Thank you brother. I appreciate your support so much!
It's ironic that a serial virtue signaller is talking about humility
Lol so cute, the Cable Nazi is angry. When he is angry he predictably resorts to racism, and is not smart enough to even know what virtue signaling is or understand what he's been actually doing all along. Just wondering, is being a racist bigot grounds for banning someone from posting on this channel?
You should take Gene’s challenge over at Audioholics, and prove to him that your ultra expensive “snake oil” cables really do work. I tend to agree with a skilled, and experienced electrical engineer would know how to judge the difference between $200 cables, and $40,000 cables. He has the instruments to do the measurements. Get together with him on a video, and let’s see some proof (or lack of proof) that there is a provable difference (either electrically, or audibly). I hate to see people wasting money on snake oil when that money could feed a family of four for three years.
Jay, I have to say something that I believe does make a difference when comparing power cords. We know that during the times of day or night or periods of time our system does sound different. At night everything does seem to sound better due to the fact that there is less noise in the electrical system as a whole coming to and through our house. With certain meters we can pick up this noise before and after the line conditioner. So if we are using a conditioner or not, would it be a good idea to record the amount of noise at the same time we are comparing the power cords?
If there is for some reason more notable noise coming in, then the comparison maybe should not take place.
Good idea
I am convinced SQ significantly improves after sun down.
Un shielded power transmission lines are subjected to solar radiation during the day. As light is also electromagnetic ,an interference of the 2 fields occurs when they interact. We perceive that as noise in our audio systems.
You seem to forget your audio equipment converts AC to DC, so the line noise and distortion is pretty irrelevant , plus all passive AC filters have a negligible difference on distortion, given the size of equipment needed to filter second and third harmonic at 15/20 Amps they are lucky if they have any effect below 500 hertz and most of the distortion lies there not above ie 120, 180, 240, 300, 360 hertz etc
I wouldn’t trust those meters on you conditioner you need to check with decent testing equipment
it a absolutely does not make a difference. what you are experiencing is a function of biology. your ears are like a muscle. by the time night rolls around, it has been in use all day and does not function the same. power has absolutely nothing to do with it.
further more, if your IEC makes a difference, your gear is broken or you're imagining things
@@nolondon yes, I don’t understand the logic here, if there super pcs conduct incredibly well, and I have no cause to doubt it, then they are conducting 3% distortion from the wall to their machine, then it goes back to ordinary wire, and is converted to DC by the power supply all ordinary wire of appropriate gauge
The fundamental noise and distortion of a device is self-made, not external unless very bad power supply design which even $500 Dacs don’t have anymore
My biggest worry is that many of these cables are not certified safe, I hope if they get a short, the cables don’t catch on fire :(
The boulder 3050 mains hum is -130 db at 60Hz the limits of hearing is -115 db with nothing else playing otherwise it’s about -40db with other tones you couldn’t hear a difference even if one existed seriously …..self-delusion on an expensive scale !
Perfect timing for me since I'm getting ready to buy power cables. I'm not going to use the stock power cables but I'm not going to invest a fortune in cables either. I think for under $500/Cable I can get a nice cable that will do the job.
All depends of the system and money you have. Thats all!
Is there a $6,800 difference in sound between the expensive cord vs thick standard one? Hell no. My server powercords have to supply up to 30 amps with ease, they cost 10 bucks each and easily provide all the clean power my equipment needs.
Very interesting video. Looking forward discovering the power unit you are going to promote 👍
Like Nazi ice cream
we should make a solar set up for hi fi/clean and quiet
It's interesting and yet too bad that the microphone 🎤 doesn't adequately show the differences in the bass region. I remember that one of the most awesome experiences happened with my system 25 years ago when I replaced 2 stock power chords with upgraded with ones I made out of Audioquest midnight speaker cables. The bass took on a whole other level. Apparently, the ear and body is quite a bit more sensitive to change than the microphone for bass.
I'm not sure I follow. You're stating that the human ear is more sensitive to measuring audio than a sensitive measuring mic?
Hi Jay nice to meet you, i come from Macau...
You are absolutely right, many "audiophiles" pay attention to details and nuances, but they don't care about the "basics": the mains supply (and to cure maniacally the ground/earth level !) must be as clean as possible and the room must be as treated as possible (without creating a "dead room" or an anecoic chamber). I'll be very curious about your thoughts on room correction software, especially for the low and deep low end of the audio spectrum. I guess that this is the way to squeeze the last % in sound quality, more than spikes, feets or also "stupidly expensives" cables.
Omg!! Incredible collection!
Are these cords the main electrical wire, or the speaker wires?
If its the power wire ,it couldn't matter much because of the hard wire in the structure.
Speaker wire should be 12 gauge at the minimum.
Any thing smaller wont allow the proper current to pass thru.
12 gauge minimum. I used 14 guage for a while, bought some oxygen free ,12 guage, copper , aint lookin back.
I like what you do. Keep up the great work ,Jay!! All stranded wire, not solid.
So i guess that the big money cords ise a heavier gauge wire inside. Which allows the ac a more open road to travel.
That would make a difference.
There's break-in, and then there's letting a cable settle in, if it's just been installed, even if it was already broken in. When it comes to break-in, I think most cable's and equipment take a full 1000 hrs of continuous use to be fully broken in.
Yes sir
If you believe cable break-in is real then you're not one of the skeptics this video was made for in the first place. I for one have not been able to reliably hear a difference on systems I've had north of 10K. I tried super expensive wire and connectors that are like 300 just for the connectors and 100 dollars per foot for the cable (OCC Copper+Silver mix 10ga) and I couldn't tell the difference from other cables, be they industrial 10ga stranded I made up or the stock 14ga cable.
I'm not trying to say there is no difference, just that I can't hear it. I have been able to hear differences in interconnects, speaker cables, different DACs, etc. So I know my system is resolving enough to show those particular differences.
@@amirjubran1845 i can show you in my system...
*❌✅ Amir Jubran 👋🧐‼️ here’s your real TEST. For the (( AUDIO F.OOL )) ASK Them if they Can hear the deference between Super Expensive Optical Cables **_or_** Cheap Optical Cables//. If they Say YES that’s A* _❌ ((AUDIO F.OOL)) ✅_ *P.S. ; I don’t believe JAY has ever done this So I will stay Subscribed to him and ODC Mikey. The two Best on (YT)👋😎‼️*
*❌🤣👍 (( ONES & ZEROS ))*
Sorry! But when will you be revealing this “new marvel of equipment” you were spoken about at the end of this video ?
Can’t wait anymore as I am working on building my new listening room !
Thanks for your reply and keep up the good work !
If you are desperate to know then consider my consultation service. This is why I offer this.
Very good videos and your system is beautiful keep up the good work.
Like ice cream
Like Nazis ice cream
Hi Jan, What PC works the best on Mephisto ? I know you mentioned AQ Dragon HC ones, what else would you recommend ?
what you did is very clever, congratulations!!!!!!!!!!
Reason #1 , should be the only reason for the craziness we embark with in this hobby. Pleasure talking with you over lunch today Jay. I really appreciate you taking the time to talk with me and have a great conversation about the journey yesterday!
That amazon cable is not enough for those Boulder amps. One of those Boulder amps (if it is class A, outputting 1500w), should be drawing close to 5000amps. If that is the case, on a small cable, you are going to see voltage sag across the small wire. You have to size wire to the application. If you use a standard power cord on a 500-1000watt AVR / AMP, there will be no perceivable difference in the performance. You could probably take a quality 8awg speaker wire, use it for your power, and be fine. You should still upgrade your house wiring to at least 10awg as well. Also, the PSU in the amplifier should be conditioning the power before it gets converted to DC.
Great Video Jay. I must say allot of the high end power cords are way to heavy to allow a sound electrical connection to the IEC input plug these IEC plugs were never designed to have such heavy cables plugged into them. The weight of these types of power cables will pull the cable down at an angle partly reducing the contact with the IEC electrical pin and so worsening the connection. Also the IEC plug maybe PCB mounted within the component this again will stress the connections between the IEC socket and the PCB and again worsening the connection. I believe Furutech have a range of products to help support the weight of the these cables and plugs to help maintain a better connection. I certainly believe good quality power cables make an audible difference to a well put together audio rig but I also like to see how far you can strip it back and maintain a good soundstage so swapping out a $6k power cord for a $10 power cord on all components is fully stripped back and as you have found your audio rig still sounded very good :) Don't forget a well engineered audio component will take the AC line in at mains voltage and filter it using a high quality mains filter to screen out RF & high frequency noise. The filtered AC voltage will then be reduced to say 12-24volts using a high quality step down toroidal transformer and then convert this lower AC voltage to DC using high quality fast diodes before applying a huge amount of secondary filtering using good quality capacitors. This lower DC voltage will then be regulated maybe up to 3 times before its allowed to enter the sensitive parts of the analogue audio chain this whole process is commonly called a linear power supply. This low voltage heavily regulated DC power supply looks nothing like your AC electrical supply entering your House if you were to analyze this DC supply on scope it would be be ruler flat like a straight line not wavey like an AC sine wave. My advise is don't waste your money on hugely expensive power cords put your Money into well engineered audio components with well engineered built in power supplies using high quality components with lots of regulation and capacitor reserves this will have a far greater positive effect on your audio signal than any power cord on planet Earth regardless of materials used, design and price.
The built-in (but located in a separate chassis) LPSUs are a key to the performance of the MSB Select Dac. As for power chords, fully agree DIY Furutech cables are the way to go - they actually offer close to the best if not the best engineering in the world, and if done DIY you remove expensive labour cost mark-ups and can create $2000 value cables for around $300.
It seems that audio system 'synergy' is key...perhaps the most "synergistic" sound system is a battery powered transistor radio.
The bigger question is, would you be better off taking that $40,000 and put it into better equipment versus power cables. In your case, you're already have top of the line ultra components, so that question may not apply to you. But what about those with more modest systems? Would anyone putting a system together be better off using stock power cords, and putting that money into a better amp, or preamp, or even speakers?
Apparently you didn’t watch the whole video or if you did you tuned out the part when he addressed this.
Hard to answer this question
Understood Loud and clear Sir!
Again I gotta say, cables that carry audio signal can have some effect on sound, tho there have been tests done that show they don't, I'm still not shure on this one, but power cords do nothing but get the power at the wall to the equip. No audio signal, Either they get the power there or they're defective. Whether a stock cord, a twisted, a braided, the raw power at the end of the cord is the same, the same! It's like the mis-conceptions of a dedicated circuit, They don't isolate you from noise in your house electrical system, They allow you full current capacity. Most peoples houses share a utility transformer with up to 10 other houses so noise generated by a house several doors away is on YOUR system. People don't understand how electricity works, or the power supply in the gear. I've been doing electronics, electrical work, audio stuff for 50 yrs. I've never seen people like in the audio world that so deny science and spend money on placebo and are happy to be fooled, boggles my mind. I love tinkering with my system too but there comes a point where you gotta go WAIT this don't make sense.
I manufactured my own, high spec. 6 x 1.5 m. power chords for around €600 .
Great discussion. Power conditioner may be a better investment for me. Waiting on your reveal. Thx Jay!
Stay tuned
Personally I found no difference in AC cable for my gryphon Diablo 300. On the other hand, my streamer is totally opposite. I tried 8 cables on the streamer and every cable clearly change the sounds. Its like I have change equipment brands. It’s not all about the cable but also the quality of the equipment. Just like Taiko didn’t matter when plugged in to the MSB dac. It all depends…
Yep
Thanks a lot of your efforts, love it and keep going, as you have a quite nice setup!! Yes, yes, cables matter, like special Ethernet switches/filters or analog/digital cables!!
Loved this video Jay! Takes a lot of courage to stand against the audiophile snobbery and just continue to do what you like. Tons of respect and thank you for what you do! And I might be one of the few who actually like the videos where you give your opinions more than the ones with just music playing.
Thanks brother
Do you have any idea how people are able to hear small differences after three days of breaking in? 1:100.000 I think.
You are absolutely right jay love your verity of content ALWAYS 👏
Thanks John
Can't wait to find out the Equipment you are Representing! I am going to be setting up a rural power pole connection with it's own transformer to the building! Jay, do you prefer Power Conditioner's or Power Regenerators for best results!✌️
You'll find out soon...stay tuned
Other than larger diameter cable these fancy cables are all bunk imo. SHOW ME 1 MEASUREMENT where these power cables compared to a conventional heavy gauge power cable improves something!! You won't be able to do it. The wall power typically runs into the primary of a transformer, there is no impedance matching. Everyone seems ignorant of the fact that power is running through shit 2 conductor cable from the breaker box to the outlet. Interconnect cables aren't much different in this regard but they do influence the sound if they are sub-par.
You should do amazon basics/stock cables on everything versus aftermarket that would be super interesting
I highly suspect that the weak link of many systems is the computer connected to the DAC. Most PCs have horrible digital output quality.
That is a factor too
It is sad that people can't just enjoy the ride.
I totally agree with you Jay, cables need to settle. It cannot be emphasized enough how important this is.
Very much looking forward to the new "power" product you will be repping.
Thanks man
Good video. Can't wait to see that A/B comparison. I would be SURPRISED if I hear an actual difference. Please just make sure it's blind to the audience. And I'd suggest that you if you have a poll where people can vote, you include amongst the voting options, "hear no difference" (in addition to "cord A sounds better" and "cord B sounds better", or however you choose to word it).
Sounds good
@@jaysaudiolab I'd like to add that you also ought to be subjected to a blind test on these cables. Cuz let's be honest: you're terribly biased, whether you agree or not, as you believe in pricey cables. Ideally, you'll have someone else do the switching and capturing of the cables/music playback. That person should simply call it cable A and cable B, and allow you to upload it, but without you knowing what cables A and B are. And THEN you should also participate in the comparison and tell us what you think about the sound of A and B. Then finally, that person will reveal to you which cable is which. That's what you ought to do.
I would venture to say whether you hear improved sound with a upgraded power cable depends on how inferior the original cable was. For example, using the same upgraded cable on my oppo 205, and the Sony ES 1100, it made a small improvement and a larger improvement respectfully. Using the same cable on my computer made a big improvement in sound and picture.
@@scottwheeler2679 Is a $5.00 steak the same as a $30 steak? Can u tell me why? I am not an audio engineer. However, I know what my ears are telling me.
@@scottwheeler2679 What part of I'm NOT an audio engineer do you NOT understand! Besides, I'll bet that if I was to research it, and give you the facts, that you will come back with ALTERNATIVE facts! End of discussion.
Great presentation Jay!!!! 👏 I learned so much from this topic.
Thanks man
The power answer is have a dedicated line put in by your electric company.
Dedicated lines are great and is the first step IMO. Power cords still make a significant differences, especially on clean dedicated lines. There are less noise to muddy the water and any differences can be picked up much easier.
Just get an S-Booster.
Try it , find out.
Every electronis has a power supply board that is responsible for the clean power no need spacial power cord!
Has i said to you Jay previously, try the esprit gaia power cables, they are amazing. I have one in my power and compared with nordost, shunyata and transparent all of the same level models, the esprit wines so far from the others. Give a try! They are amazing.
what about stock cords vs mid/high end w/a conditioner? you are genuine jay?
Firm believer in power cords here. Yes, power cords can make or break a system. I have proved it to myself over and over. Power cords will enhance a system but will not fix a crappy system.
Agree. I didn’t want to believe this but I couldn’t deny having the same experience.
What’s a “ crappy system” ?
I’m assuming you mean something less expensive…. You couldn’t make it up!
I guess it would be a good idea to use 1 highend kabel for the "powerstation" itself and from there everything gets "cleaned up" and then it isn´t most important to use expensive cables to the units or would say ALWAYS us great powerkabels for every unit?
Attended an Audioquest power cable shootout from the stock powercords on a very modest system. One cable to an integrated through a CD player. The stock one sounded closed in and vailed. Worked our way up to the 10K dragon powercord. What I learned was there is sweet spot in the $200 to $500 range which I could live with in this very modest system.
Diminishing returns as everywhere else in audio.
That makes totally sense, I would never spend thousands of dollars in cables on my university student system: it would be perfectly useless.
Great video Jay! What the heck happened with your room acoustics? It used to be really echo’y and now nothing. Different mic? Thats so strange. I wonder if it was a mic issue all along because you (Jay) were saying the room was not exho’y…
Anyhow great vid on power cords. Much appreciated video. Awesome job
I got a Lavalier
Here's my opinion: Even if a power cord can actually make an audible difference, for the BETTER, in a system, which I do believe is POSSIBLE, based on what you are using as your starting point, certainly there is no doubt that when people start trying to tell you that these power cords should cost thousands of dollars, then you are now in the world of hype-based pricing. Take the absolute most expensive cord to manufacture, and analyze it. Yes there are ways to construct a cable that makes the raw cable construction itself much more expensive than standard cables, using exotic construction techniques, Litz wire, (individually insulated strands in the conductors), custom configurations of conductors, insulators, spacers, fancy jackets, braided/non-braided, and foil shields, complex and time consuming ways of terminating them with exotic, special, custom made connectors and plugs, etc....all this can add significantly to the cost of a cable, even more so if you start dealing with precious metal conductors. But a 40,000 dollar cable is probably giving the manufacturer and dealer about 38,000 dollars worth of profit to share between them. If not more. The hype is not the cable....it's the price.
Yes, I do believe that cables CAN matter, but when it comes to power cords, if the last six feet of power cable makes a difference after the electrical power made it hundreds of miles through innumerable industrial grade splices, transformers, taps, substations, etc, and then hits the last hundred feet of romex from your power box to your audio room, then something is less than optimal about the power supply of your equipment, as that power cord is doing a line filtering function that should be handled ideally by a WELL designed power supply. The better the power supply the more immune to power cable differences it SHOULD be. So long as the cable gauge is sufficient, of course.
I wasn't shocked I knew it would sound just as good. Appreciate it.
❌Yup👋😎 __ some are miss understanding // that 1-100 ((💯 👈 being a big deference)) your maybe only gonna get a 5% Deference in sound ,and that only applies if you one ☝️ have a grounded system or two have some gear with a weak power supply an rectifier & filter circuit design ‼️ I have seen even so called High End companies skimp on this ☝️🤣‼️ the biggest change you can get in cables will be the speaker cables , they can and will change sound depending on brand and type , but the only question there is do you want to color the sound or not 🤔❌
100% agree. New cables needs to settle or "burn in" as it's called. Then a few hours extra of listening to music to decide if it's actually better than the old cable.
If the songs you always like sounds boring or off just sell the cable or use it for the coffee machine or something ;)
Hahah
They do make it taste better😜
$40,000 for a power cord, I would like to think your subscribers are not that stupid!☹️
So was there a difference? I couldn't hear anything at all.
Hi Jay, thank you for inspiring me to buy power cables, incredible gain. Can I ask you if you have a playlist? Beat Hotel is an amazing tune.
Here's my tidal playlist
tidal.com/playlist/14d2b4e5-4a02-44b6-9f63-65d7109e82db
Lot's of things can be wrong with the power even though the frequency, voltage and amperage are all within accepted spec. There can be lots of noise. Utilities routinely use the local distribution system as a communications system. The transformers filter out most of it, but it is still there. You may have reactive power issues. Utilities are constantly fighting VARS with cap bank controllers. The reactive power will impact performance of your power supply. Makes sense that a power regenerator like PS Audio's power plant can make a difference. In the early days of data centers we had to use local motor generators to get power clean enough to keep mainframe farms working reliably. You literally used an electric motor to spin a generator to get the system divorced from the noisy grid.
What I cannot understand is how a short power cord can make so much difference after miles of copper to and in the home. But it does.
It makes sense that a good regenerator close to the consumer could eliminate the need for anything fancier than a 12AWE cord. Similarily, a fully balanced system eliminates the need for expensive interconnects.
❌Finally someone who Knows a little something about electronics// I tried to say basically the same thing ___ and the amount of hate that came my way __ and my own system ain’t no slouch at over $30k and these punks 👋🧐 I even explained some of how and way they’d hear differences , but they just wanted to hate ✅❌
I’m a believer in PS audios power plant also.
Peter W ☝️🧐 an isolated ground will open Up your sound also , as most are trying to ground newbies ✅ the more you know I think that’s how it goes ‼️I could go into detail why but most will hate till they do it // but don’t do this if your RIG requires a ground like some tubed or typical A/B Push Pulls // but the latest an greatest can an should do this 😎 it will easily out perform making those grounded , sound muddy by comparison ✅
I always listen to UA-cam through my 1985 Sony Trinitron ( set on channel 3) and the radio directly through the wall power outlets - AM only. You know how much money I've saved in components!?
great vid
I would guess that, with the new addition of the Stromtank, you wouldn't need to get ultra expensive power chords anymore. Makes sense?
Are those the real Carbon Specials?
Very interesting thoughts which in a way comes down to the ancient argument in audio that has split opinions to two opposing sides in regard to 'settling in cables' and might as well include 'burning in audio components such as amplifiers and speakers.' The people who on the whole feel its hifi voodoo seem to consist of scientists, engineers or similar professions who answer why does the sound change the longer one uses the system etc..because probably the listener is getting use to the new sound. While the otherside opinion comes from users, reviewers and audiophiles who know by listening that the sound does change (hopefully for the better...!) I believe that others do believe in hearing in improvement of sound. I have never heard it in my systems but when I had my previous old laptop which was slow in nearly everything, it did improve after two hours of use (does that count in a round about way....?)
I still can't figure out why you don't spend the same amount of energy/time/money on room treatment. The room is about 50% of what you hear or don't hear and a well treated room will allow you to hear differences in gear MUCH easier and more pronounced.
Can someone please explain why radio signals are canceled when they flow into expensive copper wire? What happens if you plug a $20k cable into a $3000 amp😃? (Just a mild poke.) Can anyone explain what the expensive cable is actually doing to make the sound difference 🤔. Jay has more $$$ in a few of those cables than I have in my entire system! I would love to hang out on test day. Not knocking youtube but nothing beats firsthand experience.