Tazer JL 11.2.6 Beta 3 Adds Tire Fill alert (visual) function Blinks 4 corner lights to show if corresponding tire is below, above or at the target PSI slow blink = below target psi fast blink = above target psi solid on = at target psi Adds Brake Hold Seatbelt on, in drive (if automatic) press brake firmly when stopped for 2 seconds. Brakes will engage and you can take your foot off brake. Releases when accelerator pressed Adds Anchor Mode (Lock all 4 brakes and hold) Press brake firmly and pull hi beam stalk. All 4 brakes will hold indefinitely until accelerator pressed. Works in conjunction with Winch and Cooldown modes as well Adds bed lights or Bed+Reverse lights from remote for Gladiators Press unlock 3 times to turn on bed lights Press unlock 5 times and bed lights and reverse lights turns off when lock pressed or after 30 minute timeout Adds Cooldown mode when engine running Same method to enable, now working while running Note: transmission temperature will read as 229F while this mode is being used Adds more options to Pulse 3rd Brake Light function Adds ramp up faster, ramp down, and random modes Fixed lockers not locking consistently in 2WD and 4Hi Deleted EVIC messages when using TurnCam Will no longer overwrite radio station info in EVIC when in use
I wasn't aware of the tire fill alert. Is that auto enabled, or does it need to be turned on? That would be a great feature when airing back up! Thanks for watching my video!
FYI, in case you were still wondering about PlsBrkNum:6, that is basically how many times the 3rd brake light will flash before turning solid. It is configurable all the way up to 20 pulses.
Thank you!!!! I haven't had a chance to look that up yet, but remember seeing that in the literature. It makes sense now. Take care and thanks for watching!!!
So I have a jeep JL sport and bought the rubicon fender flares with led turn signals , So I just bought the tazer JL mini just to make them work I also corrected the tire size and that’s it my question is can I now disconnect the tazer JL mini and reconnect the cables back to the security gateway connector with my changes being saved?
I currently have this married to my gladiator..do you know if I have to unmarry it and unplug it to update it or can I just plug it into the computer as is?
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Great video. I have question Those plugs u plugged in to the tazer dosnt need to be plugged back in when driving? Dose it effect the jeep in any way when their not plugged back in
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Thanks for showing the firmware update procedure. However, maybe tead the Tazer manual before scrolling through (and attempting to explain) the various menu settings. "I don't know what that is" isn't helpful at all...😂
OK so i have a 21 gladiator and mainly need speedo correction (and in hopes that helps transmission shift points also) but to clarify this tazer can help with that plus the other options but DOESN'T provide an tunes correct?
Great video thanks. Do you know if you can do the tazer firmware update from a chromebook? or do you need to be running a windows machine or mac os machine?
Hi Steven, the update software can only be installed on Windows or Mac. The download page can be found here: www.zautomotive.com/z-automotive-programming-uti/ Thanks for watching and subscribing!!!
No security gateway needed. It is plug and play and stays plugged into the vehicle. You can program the settings you want then unmarry and remove it, but you will lose the live features if you do that.
@@OutdoorTracksChannel if you want to remove but keep the new tire size you input, do you unmarry and remove, or just remove (because I thought unmarry would revert back to settings there before you married).
I am using tazer mini and if i'm vehicle info dashboard the jeep image with all tires showing tires pressure is not showing in dashboard, What setting in tazer mini that i need to do? 2019 jeep wrangler sport jl
First go to menu 2 (vehicle info) then press left or right arrow on steering wheel to see if it is there. If not, follow the link below and download instruction manual to turn on/off tire pressure monitor under the performance menu. www.zautomotive.com/instructions/
Installed tazer mini jl zautomotive then Swapped DRL bulb to led turn signal light but i m not getting lighting option in tazer mini is it possible if u can help me out whats going on I m getting exact same options that you are getting in your jeep video
Try this: To set LED Front Turn: This setting is to configure the vehicle for LED front turn signals. If using aftermarket LED turns on a factory LED Jeep, switch this setting to NO then back to YES, this will clear the bulb out and hyperflash. • After configuration, perform a few 5 minute sleep cycles. Turn signals should be run for 20 seconds each before hyperflash and errors clear up.
I just installed OEM LED turn signals on my 2019 JL Will this remove the error code I’m getting? I’m not able to use my turn signals at the moment and the dealer wasn’t able to flash it. I don’t think they know what they were doing because it is a simple setting to change to
It should. Here are the instructions from Tazer: Set LED Front Turn: This setting is to configure the vehicle for LED front turn signals. If using aftermarket LED turns on a factory LED Jeep, switch this setting to NO then back to YES, this will clear the bulb out and hyperflash. • After configuration, perform a few 5 minute sleep cycles. Turn signals should be run for 20 seconds each before hyperflash and errors clear up. I hope this helps...
PlsBrk and PlsBrk # is pulse brake (flashes third light before going solid) and Pls Brk # is how many times it flashes before going solid. Check your state laws some may write a violation for more than 4.
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hey can I get you to contact me I’m having all types of issues with my Tayser I’m in the radio mode to start on a taser but When I go into the perf I can’t find the section to operate my lights or the other pages that you found
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Where can this be purchased and about how much for a 21 JEEP RUBICON can you turn off the door ding What is the difference between the tazer and the tazer mini
James, posted below is the link to their web page. All the information is listed there. Thanks for watching! www.zautomotive.com/product/tazer-jl-lite/
Hello, Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here: ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
No, I get around 15 mpg. It always does that when you first install the Tazer. If you look towards the end of the video, you'll see it went back to the normal reading.
Tazer JL 11.2.6 Beta 3
Adds Tire Fill alert (visual) function
Blinks 4 corner lights to show if corresponding tire is below, above or at the target PSI
slow blink = below target psi
fast blink = above target psi
solid on = at target psi
Adds Brake Hold
Seatbelt on, in drive (if automatic) press brake firmly when stopped for 2 seconds. Brakes will engage and you can take your foot off brake. Releases when accelerator pressed
Adds Anchor Mode (Lock all 4 brakes and hold)
Press brake firmly and pull hi beam stalk. All 4 brakes will hold indefinitely until accelerator pressed. Works in conjunction with Winch and Cooldown modes as well
Adds bed lights or Bed+Reverse lights from remote for Gladiators
Press unlock 3 times to turn on bed lights
Press unlock 5 times and bed lights and reverse lights
turns off when lock pressed or after 30 minute timeout
Adds Cooldown mode when engine running
Same method to enable, now working while running
Note: transmission temperature will read as 229F while this mode is being used
Adds more options to Pulse 3rd Brake Light function
Adds ramp up faster, ramp down, and random modes
Fixed lockers not locking consistently in 2WD and 4Hi
Deleted EVIC messages when using TurnCam
Will no longer overwrite radio station info in EVIC when in use
I wasn't aware of the tire fill alert. Is that auto enabled, or does it need to be turned on? That would be a great feature when airing back up! Thanks for watching my video!
FYI, in case you were still wondering about PlsBrkNum:6, that is basically how many times the 3rd brake light will flash before turning solid. It is configurable all the way up to 20 pulses.
Thank you!!!! I haven't had a chance to look that up yet, but remember seeing that in the literature. It makes sense now. Take care and thanks for watching!!!
Awesome!
So I have a jeep JL sport and bought the rubicon fender flares with led turn signals , So I just bought the tazer JL mini just to make them work I also corrected the tire size and that’s it my question is can I now disconnect the tazer JL mini and reconnect the cables back to the security gateway connector with my changes being saved?
I currently have this married to my gladiator..do you know if I have to unmarry it and unplug it to update it or can I just plug it into the computer as is?
You can update it in your living room, it doesn’t need to be connected to the Jeep
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Great video. I have question Those plugs u plugged in to the tazer dosnt need to be plugged back in when driving? Dose it effect the jeep in any way when their not plugged back in
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Thanks for showing the firmware update procedure.
However, maybe tead the Tazer manual before scrolling through (and attempting to explain) the various menu settings. "I don't know what that is" isn't helpful at all...😂
Can someone buy a tazer with the software updated to the latest version?
OK so i have a 21 gladiator and mainly need speedo correction (and in hopes that helps transmission shift points also) but to clarify this tazer can help with that plus the other options but DOESN'T provide an tunes correct?
That is correct. No tune options, but you can set tire size, which automatically adjusts shift points.
Great video thanks. Do you know if you can do the tazer firmware update from a chromebook? or do you need to be running a windows machine or mac os machine?
Hi Steven, the update software can only be installed on Windows or Mac. The download page can be found here:
www.zautomotive.com/z-automotive-programming-uti/
Thanks for watching and subscribing!!!
@@OutdoorTracksChannel Thankyou!
Fir the Tazer JL Mini is a security gateway bypass module needed... I disnt see one used here but want to be sure before I purchase.
No security gateway needed. It is plug and play and stays plugged into the vehicle. You can program the settings you want then unmarry and remove it, but you will lose the live features if you do that.
@@OutdoorTracksChannel if you want to remove but keep the new tire size you input, do you unmarry and remove, or just remove (because I thought unmarry would revert back to settings there before you married).
I am using tazer mini and if i'm vehicle info dashboard the jeep image with all tires showing tires pressure is not showing in dashboard, What setting in tazer mini that i need to do? 2019 jeep wrangler sport jl
First go to menu 2 (vehicle info) then press left or right arrow on steering wheel to see if it is there. If not, follow the link below and download instruction manual to turn on/off tire pressure monitor under the performance menu.
www.zautomotive.com/instructions/
Installed tazer mini jl zautomotive then Swapped DRL bulb to led turn signal light but i m not getting lighting option in tazer mini is it possible if u can help me out whats going on
I m getting exact same options that you are getting in your jeep video
Try this:
To set LED Front Turn: This setting is to configure the vehicle for LED front turn signals. If using aftermarket LED turns on a factory LED Jeep, switch this setting to NO then back to YES, this will clear the bulb out and hyperflash. • After configuration, perform a few 5 minute sleep cycles. Turn signals should be run for 20 seconds each before hyperflash and errors clear up.
I just installed OEM LED turn signals on my 2019 JL Will this remove the error code I’m getting? I’m not able to use my turn signals at the moment and the dealer wasn’t able to flash it. I don’t think they know what they were doing because it is a simple setting to change to
It should. Here are the instructions from Tazer:
Set LED Front Turn: This setting is to configure the vehicle for LED front turn signals. If using aftermarket LED turns on a factory LED Jeep, switch this setting to NO then back to YES, this will clear the bulb out and hyperflash. • After configuration, perform a few 5 minute sleep cycles. Turn signals should be run for 20 seconds each before hyperflash and errors clear up.
I hope this helps...
PlsBrk and PlsBrk # is pulse brake (flashes third light before going solid) and Pls Brk # is how many times it flashes before going solid. Check your state laws some may write a violation for more than 4.
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
What is your tire pressure now also what is your tpms warning light psi set?
I run mine at 37. I find it's the best for comfort and tire wear. TPMS is set at 35, disabled when aired down.
How do you get to in motion? I may have missed that but can’t find those other options at the end.
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Are you able to update the firmware without uninstalling the Tazer? Do you have to reset your settings after updating?
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
I know that it can be hard, but could you get a better picture of actual wire harness that gets unplugged.
Thank you.
Hi Sean,
I can't share photos in the chat, but if you email me, I will send you some detailed pics. 😉
outdoortrackschannel@gmail.com
Dooes lightshow work with non LED model?
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Hey can I get you to contact me I’m having all types of issues with my Tayser I’m in the radio mode to start on a taser but When I go into the perf I can’t find the section to operate my lights or the other pages that you found
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Any video on manual transmission?
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Where can this be purchased and about how much for a 21 JEEP RUBICON
can you turn off the door ding
What is the difference between the tazer and the tazer mini
James, posted below is the link to their web page. All the information is listed there. Thanks for watching!
www.zautomotive.com/product/tazer-jl-lite/
can i install the firmware without plug it in the car ?
Hello,
Sorry for the late reply. A lot has happened since my last post on this channel. In a nutshell, I sold everything to by a truck (18 wheeler) and became an Owner Operator. I have started a new channel, and am posting 3-5 videos a week. I wanted to reach out to every one of you to let you know what’s going on. Please don’t unsubscribe, as I intend to get back to this someday soon. Thank you for your support, and please visit my other channel here:
ua-cam.com/play/PL0SXAOJDYk1AZ8sfLLiQ4a7vHvfj1Ft3E.html
Are you really getting 4.7MPG on your 37s!!!
No, I get around 15 mpg. It always does that when you first install the Tazer. If you look towards the end of the video, you'll see it went back to the normal reading.
@@OutdoorTracksChannel ok it scared me a little as I’m going to 37s this weekend on my gladiator. Lol