Ford Ranger Intercooler Replacement, Loss of Power, Limp Mode

Поділитися
Вставка
  • Опубліковано 1 гру 2024

КОМЕНТАРІ • 44

  • @Snoopdonut
    @Snoopdonut 2 місяці тому +2

    As a ranger owner your my go to source to fixing and educating about these cars.

  • @michaelbooyzen8765
    @michaelbooyzen8765 Рік тому +2

    Mate...I just want to say thank you for this...all the way from South Africa and whenever we have a match against you guys I will always remember you! keep up the good work and thanks again for saving me a lot of money!

  • @russellbanfield1704
    @russellbanfield1704 2 роки тому +7

    As a Ranger owner, i find this very informative. Thanks for going to the trouble to post.

  • @69deviousdog
    @69deviousdog Рік тому

    As a bt50 owner, I find this heaps informative. Same code, same culprit. Cracked intercooler

  • @mgw2908
    @mgw2908 29 днів тому +1

    just purchased a 2013 BT-50 3.2 for work (80K -100K per year). Excellent info and has given me a heads up on what to be prepared for and what to replace before having a problem (500k from home - I am looking at you intercooler). Many thanks

  • @christophertownley6734
    @christophertownley6734 Рік тому +3

    Thank you so much. The independent garage next door said oh its an all day job replacing the intercooler. Bumper winch etc has to come off. . thabks to you told them its literally pull the grill four bolts two hoses less than an hour; honestly wish i had done myself and saved the business money.

    • @Robdutton91
      @Robdutton91 5 місяців тому

      Robbing cnts, literally takes half hour at most

  • @Josh-oc3lf
    @Josh-oc3lf 2 роки тому +3

    Nice video. Can you show us how you did the EGR Cooler bypass?

  • @ioelubrown4587
    @ioelubrown4587 2 роки тому +1

    Your videos are very helpful mate THANK YOU 👍💙

  • @mfauni
    @mfauni Рік тому +1

    Good day legend, i have a 2014 px ranger and iam getting the P00BD fault code but only on cold mornings and if i go over 100kmhs trying to overtake on the freeway, i have replaced the intercooler pipes hot and cold and intercooler itself i dont know what else to check?

  • @peteralfudalan3225
    @peteralfudalan3225 2 роки тому +2

    thank you! very informative. New subscriber from Philippines..

  • @Angler233
    @Angler233 2 місяці тому

    Do you think it's possible to do an intercooler swap with the 3.2 and a bullbar?

  • @paulcoyle6676
    @paulcoyle6676 11 місяців тому

    Hi, Nice video. Did you trim the two black ducts so that they could fit or did you leave them out?

  • @0701jacques
    @0701jacques Рік тому

    Hi, your video's are very helpful. I have 2015 ford ranger T6 and live in South Africa. When I drive over 140km/hour, my Ford goes into limp mode. I did change my Turbo, and my injectors were recently replaced. What else can it be, if you can help?

  • @kevinbennett7676
    @kevinbennett7676 2 роки тому

    great video...simplifies how to change it..ihave a 2.2 px1 ranger...can you put a second hand one from a 3,2 in it...i get the transmission light come but no engine light on...limp mode..not much noise though...revs dont get that high but can slowly gain speed...got the same code air flow prob and mechanic says intercooler leaking so causing the problem..do you think he is right...and any idea why the transmission warning comes on in a manual...look forward to your reply

    • @abdautomotive
      @abdautomotive  2 роки тому +1

      sounds like an intercooler or an intercooler hose, i've blown 2 plastic intercoolers so far before i went aluminium, a 3.2 intercooler will fit straight in, you should be able to see an oil stain on the intercooler fins where it's leaking, that will confirm it.

  • @Tammy-xf4kz
    @Tammy-xf4kz 2 роки тому +1

    I subbed cz i have a bt50 with the same engine. Very informative 👍

  • @vonlogan1
    @vonlogan1 7 місяців тому

    Im in the process of switching out intercoolers at the moment. Like you I went with an intercooler that looks almost identical to the Forefront one (in that its considerably larger than the stock one). What I want to know is, were you able to get those black plastic side pieces back over the new intercooler? They were difficult to remove with the stock one, I'm not sure I'll be able to squeeze them back into place. Your video at 8:34 looks like you just skipped putting them back in. Was that the case?

    • @SigZA
      @SigZA 7 місяців тому

      I have the same question. I tried removing mine, but it seems impossible without first removing the bumper. Also it doesn’t look like they will fit over an inter-cooler that is thicker than the stock one.

    • @vonlogan1
      @vonlogan1 7 місяців тому +2

      ⁠@@SigZAyeah I asked around and most people said they just tossed them. Not worth bothering. So that’s what I did. I also added a straight (careless) down pipe yesterday, before taking the truck in a 5 hour loop. Feels like a different truck. Especially when over taking on an incline.

    • @vonlogan1
      @vonlogan1 7 місяців тому +1

      @@SigZAyou don’t have to remove the bumper to get them out. But to might have to slightly bend them.

  • @christopherpellegrino1701
    @christopherpellegrino1701 10 місяців тому +1

    Thanks man your video helped me out and saved me bit of cash doing it myself keep up thr good work mate my ranger always giving me grief I'm and fussiest living in Ireland and this helped me out heaps they are all hopeless cunts over here

  • @turbostyler
    @turbostyler 2 роки тому

    That's a great score for 150 bucks. Is there any noticeable difference in day to day driving with the bigger intercooler. I know when I got my intercooler done a long time ago in my petrol 2.0l turbo it felt like it picked up heaps more torque and was wondering if its the same feeling with the diesel?

    • @abdautomotive
      @abdautomotive  2 роки тому +2

      yes it picked up more torque, i think that's due to a better flowing core & lower intake temps.

    • @turbostyler
      @turbostyler 2 роки тому

      @@abdautomotive Thanks mate, I might go look for a second hand one like yourself.

  • @Ryon915
    @Ryon915 Рік тому

    Hi morning, thanks for sharing, your videos have been very in formative. I would like to purchase one of thase intercooler. If you know where i can get a used one that would be great. Thanks

  • @jack-pp5pc
    @jack-pp5pc 2 роки тому

    How do you remove the intercooler from the donor car bt50? I found that the intercooler hitting the headlamp / front bumper support

  • @kylemacca6602
    @kylemacca6602 2 роки тому

    hey mate when are you going to do a engine oil change video

    • @abdautomotive
      @abdautomotive  2 роки тому

      im going to do an oil pump removal/install video which will cover that

  • @C.JPhotography
    @C.JPhotography 2 роки тому

    How much life did you get from your shocks ?

  • @luischiong4458
    @luischiong4458 Рік тому

    Hello, Are you using the same factory turbo?

    • @abdautomotive
      @abdautomotive  Рік тому

      yes still the factory unit

    • @luischiong4458
      @luischiong4458 Рік тому

      I have the same problem with my ranger, thinking backwards, I hit my car and since that I notice many times loose of power. I will change the intercooler unit. Thanks for your videos.

  • @willpower3556
    @willpower3556 Рік тому

    can this also relate to a P00BC code?

    • @abdautomotive
      @abdautomotive  Рік тому

      no, i think that it more MAF sensor related

    • @willpower3556
      @willpower3556 Рік тому

      @@abdautomotive oh ok only just changed it and still get the same code. Just changed all the hoses and intercooler plus new air filter. The ranger is driving me mad

    • @Robdutton91
      @Robdutton91 5 місяців тому

      I had a MAF code when my rubber hose split. Replaced the hose and it went away again

  • @tombradley4842
    @tombradley4842 2 роки тому

    Are the intercooler repairable??

    • @abdautomotive
      @abdautomotive  2 роки тому

      no, get a aluminium one , you'll never replace it again