Grate idea, I have the same Arboga U2508 and always have the problem of tool holders coming off, I'm going to try making the same collect. greetings from México!!!
How did you decide on clearance values? I'm thinking about the thickness of plate vs height of arbor slot and the diameter of the plate cutout vs diameter of arbor slot.
Great video! I have the B2508, and I dont know if i can convert it to a drill / mill. It has a male hexagonal drive arbor. I do not know why, or how i can use tools with it
Hi Have same issue, have a b2508 and trying to find out how to convert it to u2508 , have no tread to fasten the “big” nut which shall hold the chuck in place, any suggestions?
Hey there.....sorry for the late answer and my bad english. Yes its homemade and no no drawing made for it. If you are still interested i can try to write you through. It was not difficult once the idea was there.
I Have a Arboga U2508 and doesent have a chuck collor to it, im a beginner in lathe and milling and it is probably impossible for me to make this parts..=) I wonder if it is possible for me to buy a set of this collar chuck, if you can make one for me? I live in Umea Sweden. Regards Doger
Hello Doger Karlström If i had time i would do that for you. I'am realy bussy at work and time for myself is precious. I hope you find an other way to purchase a spindle nut so you can take the full benefit of the machine. And belive me, its realy not that hard to make it yourself. It is a greate opportunity to upgrade your skills. All you need is a lathe that has the capabilitie of thread cutting. The spindle nose is a m62x1.25 metric thread.
Hallo I have a Modig UBM 30 and had to build a tool holder and It is done I have a picture on my phone if you want to see the tool It is very much like the Aborga but smaller
Grate idea, I have the same Arboga U2508 and always have the problem of tool holders coming off, I'm going to try making the same collect. greetings from México!!!
Hi Takko. May I ask how you came up with the dimensions for the thicker 'ring' that we see you pick up @1:00 please?
Take good measurements and make a drawing while doing that
@@tamaelchAhh, so you already had one to measure? I'm not in that same boat, unfortunately, as I've received none of those parts.
I made id compleet out of scratch. I only had the machine and one spindle nut
How did you decide on clearance values? I'm thinking about the thickness of plate vs height of arbor slot and the diameter of the plate cutout vs diameter of arbor slot.
Great video! I have the B2508, and I dont know if i can convert it to a drill / mill. It has a male hexagonal drive arbor. I do not know why, or how i can use tools with it
Hi Have same issue, have a b2508 and trying to find out how to convert it to u2508 , have no tread to fasten the “big” nut which shall hold the chuck in place, any suggestions?
YES!
Hey there.....sorry for the late answer and my bad english.
Yes its homemade and no no drawing made for it.
If you are still interested i can try to write you through.
It was not difficult once the idea was there.
Hey.
thx for answering, but I copied the adapter already.
Thank you for that great idea ;)
cheers
Hi there, I want to build a similar colletchuck. Thanks for the idea
Hallo I am in need of this infomation Please
Nice modification!
Have you made it on your own?
Do you have any drawings or manuals?
Thank you.
I Have a Arboga U2508 and doesent have a chuck collor to it, im a beginner in lathe and milling and it is probably impossible for me to make this parts..=)
I wonder if it is possible for me to buy a set of this collar chuck, if you can make one for me?
I live in Umea Sweden.
Regards Doger
Hello Doger Karlström
If i had time i would do that for you.
I'am realy bussy at work and time for myself is precious.
I hope you find an other way to purchase a spindle nut so you can take the full benefit of the machine.
And belive me, its realy not that hard to make it yourself.
It is a greate opportunity to upgrade your skills. All you need is a lathe that has the capabilitie of thread cutting.
The spindle nose is a m62x1.25 metric thread.
Thanx for the reply, i have ordered the parts i need and i have a lathe and will try to fabricate this parts..=)
Nice to hear.
Good luck
Doger I am in USA and have a Modig and also need the infomaion best regards
I will do one for myself, if the quality is right I can help you!!!
Hallo I have a Modig UBM 30 and had to build a tool holder and It is done I have a picture on my phone if you want to see the tool It is very much like the Aborga but smaller
Hallo I am getting a Modig and am in the need of the modification Please