1. Get PVC pipe 2. put glue on inside of pipe 3. Get a bunch of those weird doughnut shapes foam pads for furniture 4. Place foam pads inside PVC pipe 5. Paint black 6. Duct tape to front of gun
The loudest part on the ssg -24 is the piston flying forward. You would need to stick foam in the magazine receiver. A suppressor ain't gonna cut the sound that much. Get an Hpa if you want quiet.
If you've actually fired the ssg-24 then you can argue. Without a suppressor, the only noise heard is the piston head, correct, but its not heard through the body at all. Without a suppressor it's near impossible to hear the gun firing when behind it. The suppressor helps a lot for the sound coming out the front. But if you are within a foot of it or are right in front of it - you may hear it.
I find airsoft suppressors stupid on a spring gun. U hear the spring more than the round, same in an aeg u hear the motor. Now on a gas or co2 gun that would work, allows the gas to expand before leaving the barrel reducing the noise.
I would say that in terms of noise, springs are between AEG's and gas. Does it suppress a spring gun? Yeah, will it suppress as well as a gas gun? Nah.
It DOES work very well on a closed shell body replica like my P90 AEG, foam supressor really makes it very quiet, does not for our m4 or scorpion evo as much though
Don't you think the gas would mess up the foam rings, and move them from the force of the gas pushing against the different diamater sizes of rings in side the tube, they are from what I can tell just held in with retention. Thus getting in the path of the BB
Could you do a unsupressed vs supressed shooting video with every gun you have. As long as the supressor fits of cours. I hope you know what I mean. It would be great!
@@EmaleesBoyfriend if u have a gas/co2 gun is another thing, but most people have electric guns and the sound theese guns make doesn’t come from the barrel
@@francobabystore6582 Of course it works bro, you just gotta open up the gearbox and put foam all over the gears. It's gonna be so quiet that you won't hear a thing when pulling the trigger.
All I can say is, you are very smart for using your yt channel for marketing these products, every time I go to the airsoft field I see one of the Novritsch products somewhere. It is a very good marketing technique.
Matt Ostermeier idk... I would assume not for aeg only because the motors and gear box would be louder than the air coming out... for HPA, it’s just straight air, so I would assume the suppressor*if it’s strong enough for the tanks PSI* would dampen some of the air at the end of the barrel from its structure and material
I use plastic pot scrubbers cut into rings for my suppressor. I thought I had stumbled onto a genius method of cheap suppression but I was watching a Kicking Mustang video where he mentioned it as well. Works great and they are cheap.
*sigh* People need to stop perpetuating the myth that egg crate (also known as reverb pannels) absorb sound. They do NOT have sound dampening properties. The whole point of the pannel is to scatter sound waves so they don't deflect as easily on the surface underneath. They are open cell foam, and sounds still pass through them. Easily. The only sound "proofing" material is MLV, or mass load vinal. MLV is designed to deaden sounds by absorbing the energetic wave passing through the air and displacing it across it's heavy, dense, material. Because mlv is specifically designed to be dense, this allows it to absorb much more energy, which is exactly what sound it. Long story short: Studio panels scatter sound, they don't deaden it. MLV deadens sound from passing through them (with possible reflections)
*sigh* oh shit, another know it all that had to research his shit and then edit it. Then explain EVERY SINGLE sound test with the "egg crates" and the fact that the room KNOWN AS THE SENSE DEPRIVATION CHAMBER uses it for SCIENTIFIC research.
@@MrKrimson They use triangles, which are different than egg crate design. The deeper the triangle the more effectivr it is at redirection. Redirection, not absorption. Additionally, these are to prevent sound from BOUNCING off the walls and making it back into the room, as echo. These sound Chambers are designed to prevent sound that already exists in the chamber from bouncing off the walls and reaching either a person or an instrument in the middle. That's why they are so quiet inside. Most recording studio have MLV in the walls to prevent noise transfer and Reverb panels to prevent echo. So you can slam away on drums and not piss everyone outside off, and also not have background echo over the recording mic. These two things are completely different. If I scream in a deprivation chamber without MLV the sound waves will move the sound over the echo material and scatter it. However, the noise will still transfer through the material to the wall and through it but in a random manner. Yes, it will be quieter than without having the panneling, but to people outside it would make almost no difference. The material is not design to ABSORB sound, it's design to keep it from reflecting off the material behind it. This effectively means the suppressor isn't an echo chamber. However, this doesn't absorb the energy from the sound waves, it just makes it harder to leave the end of the device. If this was to be balls to the wall correct, it would need a MLV layer AND an echo layer. A great way to try this at home is to take "acoustic" panneling, put it to your mouth and talk. Then take a blanket, put it to your mouth and talk. You'll notice that the blanket blocks A LOT more sound, because the panelling is open cell foam.
@@MrKrimson also, I edited my comment because of minor grammatical errors. I do care a little bit about spelling, because it makes the comment easier to read. I will not edit my replies, however
@@AarPlays Mate, i agree- but the MLV is the material. if it were down to structure alone, the egg shape isnt bad by a long shot - but in any case - a suppressor for a springer is pointless unless the body itself can absorb sound... and polymers dont tend to be good at that =p
Note* doesn't work on aeg and some louder co2 pistols. Aeg sound comes from gearbox, so you need to stick foam to there, it wount work. And co2 slams just the slide which makes the loud noise
the most effective suppressors are homemade with dense PVC foam tubing, cut down to size to be a tight fit against the suppressor in one monolithic tube instead of foam disks. You can unravel the foam and drill or carve blind holes to increase sound reduction further. Using foam disks emulates how real suppressors work, but for airsoft they do not help
i've been working on a prototype two can stage system with a metal innertube (metal ) with cork filled disks ) and a PVC outer tube filled with foam. Cork absorbs sound and the foam dispenses it. So far I'm hitting 50-60dbs .....pretty impressed but I'm still looking to get in the 30-40 ranges.
Novritsh, you can use foams of diferent densities, you will absorb more frequencys and the change of materials makes de sound vibrate of diferent modes, first start with higer density and then lower density, you'll get all spectrum of frequencys supressed
The sound is absorbed not because of the foam as much as the shape of it. Try putting flat foam on the wall and you will see it's sound absorption capabilities are much worse.
hey nov sound deadening panels mostly work by having the sound bounce in between the channels back and forth until the sound becomes much weaker and only partly because of the foam used this is why in a lot of outdoor concert type areas you can find these made out of softer polymers the suppressor does this to an effect due to the different sizing of foam but if you spent more time developing the shape it could've been better
I am a Filipino and i have watch a video of you playing here in the Philippines... So i am gonna subscribe your channel since i like your video any way.. From Philippines..
AEX sells some that have foam already in the suppressor for about $15-$25 that do the exact same. They have both a small pistol size and a bigger size.
You would be better if you did the "mountains" pattern on the foam inside the silencer as well. This stops the sound from reflecting perfectly off of the "flat" foam surface and distorts it making its amplitude smaller by spreading it in all directions.
So your telling me the noise of a airsoft gun comes from the barrel because I’m pretty sure when the bb is fired from the gun the noise is created from the mechanism fireing the bb and if you notice in the comparison the “silenced” shot sounds a lot like when you hear something in slow motion (things in slow motion are often quieter)
This silencer looks good and I want it! I know there are some stores selling your BB's here in Thailand. Hope your other products will continue to come in too!
Theres literally some out there already made that do the same if not better. That cost much much less (ex. $14.99 & $19.99) one specifically ive used and works great is a "castellan 100mm ccw pistol silencer"
Or you just build your own one for 5 Bucks with stuff from the DIY Store: 2" Pipe with 2" pipeisolation (1" Innerdiameter) In Front just use a 2" Disk with 1/2" hole and some hot Glue
nut to bust ur balls bro but the reason the foam actually works is because of the shape which makes the sound waves bounce between the triangles and be absorbed into the foam slowly in instead of bouncing off a wall towards the direction the wall is facing.
The foam itself isn’t what makes it ”less noisy” it’s the way the spikes are aligned.. or rather how the sound bounces to infinity between the spikes! So not the material like you are claiming 😅
_Get a piece of tape, put 3 layers of toilet paper in it, and then tape it on the tip of your supressor, it'll get almost 30% quieter, but the gun does get a bit weaker._
allso make a 2D hop-up adjusting (2 dimensional , up-down, left-right)... like adjusting your scope...if windy! OR you will be able to shoot around corners, this idea just came to me and i think it's genius and i give it to you because i will never develop it, and you have the means, i'd love to see that from your channel some day. right now i have to study for ATPL...Pilot. GL hope you see this message please like so the chances get higher!
:O Make some Glock 14mm-internal thread silencers and send them to Australia, we have just started expanding the Gel Blasting community! Aussie Gel BB's are usually over-< 7mm and under->7.5mm compared to 6mm airsoft BB's. And yes they can vary in size from .5mm as they are hydrated with water although the better quality brands are more consistent in their average sizes compared to cheapo ones once hydrated. I'm just letting you know the sizes because I'm not sure if the silencers depend on the size of the projectile.
I bought the SSG10 with the silencer and from my personal experience, the silencer is a waste of money. It hardly even silences the gun since the spring will make a lot of the noise when you shoot it. I wouldn't waste my money with the silencer as it really didn't do much to silence the gun.
Ikr, novritsch is an idiot and a scammer, he intentionally lowered the volume in this video, as spring loaded snipers don't benefit anything from a silencer, only gas or hpa. The amount of time he spent on google to research makes me laugh, what a clown.
I have the exact same build suppressor, the difference is that it is from an another brand, and it is waaaaaaaaaaaaaaaaay cheaper. It has the exact same everything. I have that for 4 years so ... khm. Only those holes are missing from it.
I did exactly the same back in 2016, a guy cut me different size of foam rings via laser and i used the same chamber pattern. first the big chamber then the smaller ones.
Because it is a GBB and not a NBB it won't work as the sound doesn't come out of the barrel. It comes from the aditional air excaping and causing the blowback
@@NK_Customs well still quite a bit of gas escapes from the barrel making a lot of noise especially in my example the ssp1 if you just rack the slide it's obviously not as loud as firing it
1) I THINK that you still need an inner metal tube inside the suppressor to be certain that the BB's trajectory will not be "disturbed" by the foam. 😕 Long story... 2) Consider changing the channel's name... 🤔 *Novritsch TECH*? Maybe?
How do you cut the holes in the acoustic foam? Spending $25 for it to be shipped to my house isn’t worth purchasing the foam alone so would rather purchase acoustic foam in bulk and cut it myself like shown as your example
My 15 dollar airsoft suppressor can do the same, it has foam in it. + the foam can be replaced as long as you cut the next foam carefully. I'd rather see the foam inside cut in an angle, that should absorb more of the sounds, just like irl
Very nice, will it work on the ssp1 too? That would bei awesome. Is there any info you can give on the realsteel shaft that is listed in the ssg24 shop but not available? Im really interested in that one.
I got this a little bit ago and it doesn’t silence aeg’s at all It just adds a ton of length and weight to the front It is way to big for me to want to use it Don’t get this unless you have a spring sniper
i have a air rifle, but unthreaded barrel, do you have supressors to fit to the said barrel, will you ship to sri lanka, what will be the silnecer and shipment cost will be, thanks
I made my silencer for my pallet gun works perfect 👍 no blasting sound just a thump what he did wrong with that silencer is put that inner tube with it doesn't allow the air to go anywhere in that smaller tube unless he puts a lot more holes then it would probably work better 👍
i actually thougt airsoft guns couldnt be more silenced, so really good job, u defintly impressed me. btw ill probably buy it, tbh mor because it looks cool af XD
Silencer = Sound Suppressor Sound Suppressor = Silencer Suppressor = Many things A suppressor could be a flash suppressor, designed to reduce muzzle flash. A suppressor could be a car muffler, designed to reduce engine sounds and harmful byproducts. A suppressor could be *anything* designed to reduce *anything.* So remember, Silencer = Sounds Suppressor. There is no difference. But it is entirely incorrect to say "suppressor" without being specific. It's just correct logic.
Link to Product: novritsch.com/product/ssg24-suppressor/
Pls make the scope cheaper and pls and a silencer for the ssp-1
Nice video grüße aus Niederbayern
Nice. Videos love it 😍
NOVRITSCH2 - Second Channel : What happened to the clothes you used to offer in your store?
Kann man Den schalldämpfer auch auf Einer 0,5 joule m4 benutzen?
A cheaper method is to scream whenever you fire the gun.
I always do that when i fart in a public place xd
yeah that’s what I do while rushing I just scream REEEEEEEEEEEEEEEEEEEEE to stay hidden and that no one knows that I’m there
It also works with screaming to drown the sound of Velcro
Yes
That is a method of a God novritsch is not ready for it
Other producers= How it works is a secret no one shall know
Novritch= Here's how you build my suppressor in a step by step guide
And here's the 3d blueprint
@@LolLol-hj3kp yo ass is verry right
1. Get PVC pipe
2. put glue on inside of pipe
3. Get a bunch of those weird doughnut shapes foam pads for furniture
4. Place foam pads inside PVC pipe
5. Paint black
6. Duct tape to front of gun
Thats *really* illegal...
@@c-dawg2145 Not unless you live in texas where when you can paint over any orange tip when you own it.
or get a metal pipe
Genius
dude this really works! thanks!!!
now i can finally go stealth with my minigun!
The loudest part on the ssg -24 is the piston flying forward. You would need to stick foam in the magazine receiver. A suppressor ain't gonna cut the sound that much. Get an Hpa if you want quiet.
Thank u. I just made that same point
just sorbo inside the cylinder, a few quid for a sheet
you can glue foam on the piston head, a mod i tested 9 years a go. Works really good, you can even combo with silicone+ foam (2 stage)
Jacob Dowdle my tm p90tr bags to differ.... literally the quietest stock aeg with a foam suppressor
If you've actually fired the ssg-24 then you can argue. Without a suppressor, the only noise heard is the piston head, correct, but its not heard through the body at all. Without a suppressor it's near impossible to hear the gun firing when behind it. The suppressor helps a lot for the sound coming out the front. But if you are within a foot of it or are right in front of it - you may hear it.
1:04 that is simply not true.
It absorbes the sound because of it's structure, not because it's some sort of extra-foam.
FALSE.
BEARS
BEAT
BATTLESTARGALACTICA
its because of both.
It’s because the disrupted particles (sound) gets caught in between the two sheets, this makes it anacoic
Sound is not "particles"
FuMu disrupted particles create sound
I find airsoft suppressors stupid on a spring gun. U hear the spring more than the round, same in an aeg u hear the motor. Now on a gas or co2 gun that would work, allows the gas to expand before leaving the barrel reducing the noise.
I would say that in terms of noise, springs are between AEG's and gas.
Does it suppress a spring gun? Yeah, will it suppress as well as a gas gun? Nah.
It DOES work very well on a closed shell body replica like my P90 AEG, foam supressor really makes it very quiet, does not for our m4 or scorpion evo as much though
Yes! Finaly someone normal
Don't you think the gas would mess up the foam rings, and move them from the force of the gas pushing against the different diamater sizes of rings in side the tube, they are from what I can tell just held in with retention. Thus getting in the path of the BB
Bolton Cush no..
Could you do a unsupressed vs supressed shooting video with every gun you have. As long as the supressor fits of cours. I hope you know what I mean. It would be great!
preferably with one of the louder guns too, preferably on full auto
It doesnt work with electric guns.
@@francobabystore6582 it does I have one and it works perfectly and also just becuase a gun is full auto semi auto does not mean it’s a electric gun
@@EmaleesBoyfriend if u have a gas/co2 gun is another thing, but most people have electric guns and the sound theese guns make doesn’t come from the barrel
@@francobabystore6582 Of course it works bro, you just gotta open up the gearbox and put foam all over the gears. It's gonna be so quiet that you won't hear a thing when pulling the trigger.
I already bought this supressor.I'm impressed because it is very silent.Good job NOVRITSCH!
Did you get the adapter in the packet or did you buy the adapter seperately
@@christofferjohansen4341you have to buy it separately (4 years later)
All I can say is, you are very smart for using your yt channel for marketing these products, every time I go to the airsoft field I see one of the Novritsch products somewhere. It is a very good marketing technique.
Can you test on an AEG or HPA bitte?
Matt Ostermeier
Deutsch ODER Englisch nicht Denglisch bitte.
Danke :DD
Nien NICHT der AEG
Matt Ostermeier german and englisch in 1 sentence lul
I don't think it would work an an AEG
Matt Ostermeier idk... I would assume not for aeg only because the motors and gear box would be louder than the air coming out... for HPA, it’s just straight air, so I would assume the suppressor*if it’s strong enough for the tanks PSI* would dampen some of the air at the end of the barrel from its structure and material
The moment you realize that most of the noise from an Airsoft gun comes from the gearbox and piston
Thank you so much for creating this! I've been needing a suppressor for my pistol for years.
I use plastic pot scrubbers cut into rings for my suppressor. I thought I had stumbled onto a genius method of cheap suppression but I was watching a Kicking Mustang video where he mentioned it as well. Works great and they are cheap.
*actually*
When you fire the gun, the air coming out of the barrel makes a noise.
The suppressor helps to stop this,
Not the sound of the piston head
Kurzgesagt: deine Produkte sind die besten
*sigh*
People need to stop perpetuating the myth that egg crate (also known as reverb pannels) absorb sound. They do NOT have sound dampening properties.
The whole point of the pannel is to scatter sound waves so they don't deflect as easily on the surface underneath. They are open cell foam, and sounds still pass through them. Easily.
The only sound "proofing" material is MLV, or mass load vinal.
MLV is designed to deaden sounds by absorbing the energetic wave passing through the air and displacing it across it's heavy, dense, material. Because mlv is specifically designed to be dense, this allows it to absorb much more energy, which is exactly what sound it.
Long story short:
Studio panels scatter sound, they don't deaden it.
MLV deadens sound from passing through them (with possible reflections)
*sigh* oh shit, another know it all that had to research his shit and then edit it. Then explain EVERY SINGLE sound test with the "egg crates" and the fact that the room KNOWN AS THE SENSE DEPRIVATION CHAMBER uses it for SCIENTIFIC research.
@@MrKrimson They use triangles, which are different than egg crate design. The deeper the triangle the more effectivr it is at redirection. Redirection, not absorption. Additionally, these are to prevent sound from BOUNCING off the walls and making it back into the room, as echo. These sound Chambers are designed to prevent sound that already exists in the chamber from bouncing off the walls and reaching either a person or an instrument in the middle. That's why they are so quiet inside.
Most recording studio have MLV in the walls to prevent noise transfer and Reverb panels to prevent echo. So you can slam away on drums and not piss everyone outside off, and also not have background echo over the recording mic.
These two things are completely different. If I scream in a deprivation chamber without MLV the sound waves will move the sound over the echo material and scatter it. However, the noise will still transfer through the material to the wall and through it but in a random manner. Yes, it will be quieter than without having the panneling, but to people outside it would make almost no difference.
The material is not design to ABSORB sound, it's design to keep it from reflecting off the material behind it. This effectively means the suppressor isn't an echo chamber. However, this doesn't absorb the energy from the sound waves, it just makes it harder to leave the end of the device.
If this was to be balls to the wall correct, it would need a MLV layer AND an echo layer.
A great way to try this at home is to take "acoustic" panneling, put it to your mouth and talk.
Then take a blanket, put it to your mouth and talk.
You'll notice that the blanket blocks A LOT more sound, because the panelling is open cell foam.
@@MrKrimson also, I edited my comment because of minor grammatical errors. I do care a little bit about spelling, because it makes the comment easier to read. I will not edit my replies, however
@@AarPlays Mate, i agree- but the MLV is the material. if it were down to structure alone, the egg shape isnt bad by a long shot - but in any case - a suppressor for a springer is pointless unless the body itself can absorb sound... and polymers dont tend to be good at that =p
Note* doesn't work on aeg and some louder co2 pistols. Aeg sound comes from gearbox, so you need to stick foam to there, it wount work. And co2 slams just the slide which makes the loud noise
the most effective suppressors are homemade with dense PVC foam tubing, cut down to size to be a tight fit against the suppressor in one monolithic tube instead of foam disks. You can unravel the foam and drill or carve blind holes to increase sound reduction further. Using foam disks emulates how real suppressors work, but for airsoft they do not help
i've been working on a prototype two can stage system with a metal innertube (metal ) with cork filled disks ) and a PVC outer tube filled with foam. Cork absorbs sound and the foam dispenses it. So far I'm hitting 50-60dbs .....pretty impressed but I'm still looking to get in the 30-40 ranges.
My cheap supressor has a spring in the middle and two foam disks like yours on each end. It actually works pretty good.
After he shoots the suppressed version i imagine the noveritch logo on the screen with that into noice
Back at it again with another product.
Now make one for the SSP-1!
yes we need a YUGE one, not baby suppressor
the ssp1 is suppose to be loud lol
Fr
I’m only here for ATF memes
me too lol
same
Same
That suppressor I bought really works great with my ace tech tracer unit it fits perfectly
How do you combinate a tracer with a suppresor?👀
@@mr.taddel4282 put a tracer in
Novritsh, you can use foams of diferent densities, you will absorb more frequencys and the change of materials makes de sound vibrate of diferent modes, first start with higer density and then lower density, you'll get all spectrum of frequencys supressed
The sound is absorbed not because of the foam as much as the shape of it. Try putting flat foam on the wall and you will see it's sound absorption capabilities are much worse.
hey nov sound deadening panels mostly work by having the sound bounce in between the channels back and forth until the sound becomes much weaker and only partly because of the foam used this is why in a lot of outdoor concert type areas you can find these made out of softer polymers the suppressor does this to an effect due to the different sizing of foam but if you spent more time developing the shape it could've been better
the sound is absorbed by those matts due the the form of the matt, material also helps but mostly due to form
I'm really liking the Novritsch product line. Now please make a bullpup rifle and a rifle that can make use of my PTS EPM mags.
Duly noted some suppressed work differently and effectively ranged
I am a Filipino and i have watch a video of you playing here in the Philippines... So i am gonna subscribe your channel since i like your video any way.. From Philippines..
AEX sells some that have foam already in the suppressor for about $15-$25 that do the exact same. They have both a small pistol size and a bigger size.
You would be better if you did the "mountains" pattern on the foam inside the silencer as well. This stops the sound from reflecting perfectly off of the "flat" foam surface and distorts it making its amplitude smaller by spreading it in all directions.
Suppressor+AirbrakePiston=parfect
So your telling me the noise of a airsoft gun comes from the barrel because I’m pretty sure when the bb is fired from the gun the noise is created from the mechanism fireing the bb and if you notice in the comparison the “silenced” shot sounds a lot like when you hear something in slow motion (things in slow motion are often quieter)
Awesome Presentation!! 👏👏 Very detailed and Helpful. I like your design of Supressor👍
Another good way is if you do use your own foam puta aeg spring inside of it which stops BBs from hitting the foam, just a tip :o
U can takeout supressor to parts and put the foam in mix big small big small to get even less sound
This silencer looks good and I want it! I know there are some stores selling your BB's here in Thailand. Hope your other products will continue to come in too!
Now all we need
Is a shotgun supressor.
Lmao.
Now we just need a working suppressor for your new pistol
That would be pretty sick
Why am I Just now seeing this. I wish I would have saw this when I came out. Even if I’m late keep up the great work.
thank you. You can find all the technical infos here: novritsch.com/product/ssg24-suppressor/
Theres literally some out there already made that do the same if not better. That cost much much less (ex. $14.99 & $19.99) one specifically ive used and works great is a "castellan 100mm ccw pistol silencer"
They have/had these at airsoft extreme. So im sure theyre out there somewhere.
Legend says the range is low when you have supressor
Sadly... I like the look of suppressors in videogames but then my range is limited... 😐
@@christophhaas5696 have u heard on mono suppressor and longer barrel, and sometimes stopping power rounds? Also Longshot. +10000 range
Mein Boi du kommst immer mit denn geilsten Sachen freu mich schon wenn meine Neue Sniper ankommt dann hol ich mir auch denn Schaldämpfer
You could litteraly tape a nerf dart to your guns barrel and it does the same thing. I wouldn't spend any money on this. But thats just my opinion
Or you just build your own one for 5 Bucks with stuff from the DIY Store:
2" Pipe with 2" pipeisolation (1" Innerdiameter)
In Front just use a 2" Disk with 1/2" hole and some hot Glue
You should make the foam small pyramids exactly like the acoustic foam you held up.
nut to bust ur balls bro but the reason the foam actually works is because of the shape which makes the sound waves bounce between the triangles and be absorbed into the foam slowly in instead of bouncing off a wall towards the direction the wall is facing.
Funny how mine sounds exactly the same, considering the noise comes from the piston and not the air coming out
The foam itself isn’t what makes it ”less noisy” it’s the way the spikes are aligned.. or rather how the sound bounces to infinity between the spikes! So not the material like you are claiming 😅
Please do a test for this suppressor for an AEG, a gas blowback pistol, and an HPA gun. That would be appreciated
I'm still 3D printing some silencer buffers. They work pretty well
_Get a piece of tape, put 3 layers of toilet paper in it, and then tape it on the tip of your supressor, it'll get almost 30% quieter, but the gun does get a bit weaker._
allso make a 2D hop-up adjusting (2 dimensional , up-down, left-right)... like adjusting your scope...if windy! OR you will be able to shoot around corners, this idea just came to me and i think it's genius and i give it to you because i will never develop it, and you have the means, i'd love to see that from your channel some day. right now i have to study for ATPL...Pilot.
GL hope you see this message please like so the chances get higher!
This already exist, can't remember what product i saw it on, but it's not an original idea :)
and its shit.
and its shit.
or you just saw it on a Paintball channel. cause this is available since the dawn of time
just google "Apex 2 Barrel"
The little movement he makes with his right arm 😂😂
:O Make some Glock 14mm-internal thread silencers and send them to Australia, we have just started expanding the Gel Blasting community! Aussie Gel BB's are usually over-< 7mm and under->7.5mm compared to 6mm airsoft BB's. And yes they can vary in size from .5mm as they are hydrated with water although the better quality brands are more consistent in their average sizes compared to cheapo ones once hydrated.
I'm just letting you know the sizes because I'm not sure if the silencers depend on the size of the projectile.
You could make a Supressor Cover Design that looks like the M9 Baretta Supressor from Rainbow Six Siege.
just placed an order right now! it reached pre order batch #3, better get yours
It triggers me when someone says " Silencer "
By the way I love your vids
see a therapist?
Lieutenant_ JG Silencer
@@Kelvostrass nah fam
It silence the noise?
Suppressor is not the correct word, both are correct.
"BUT IT DOESNT SILENCES YOUR WEAPON!!!"
Apple has nothing to do with apples eiter.
Great job looks great hope to see it in a match soon
Might also work with nerf guns, paintball markers and possibly firearms if the hole is larger
Richtig geil dur deine videos bin ich voll interesiert in airsoft
I believe the correct terminology is "Cream Filled Banana"
I bought the SSG10 with the silencer and from my personal experience, the silencer is a waste of money. It hardly even silences the gun since the spring will make a lot of the noise when you shoot it. I wouldn't waste my money with the silencer as it really didn't do much to silence the gun.
Ikr, novritsch is an idiot and a scammer, he intentionally lowered the volume in this video, as spring loaded snipers don't benefit anything from a silencer, only gas or hpa. The amount of time he spent on google to research makes me laugh, what a clown.
I have the exact same build suppressor, the difference is that it is from an another brand, and it is waaaaaaaaaaaaaaaaay cheaper. It has the exact same everything. I have that for 4 years so ... khm. Only those holes are missing from it.
The world need’s it!
Hay alguna posibilidad de que tengamos la opción de ver y/o escuchar el video en español ? Muchas gracias.
Will you be taking responsibility for the quality control of this product? Especially in lieu of the slew of issues surrounding your pistol.
sweet video Mr Nov - but if i wanted to bore some of my own foam - what toolw ould you recommend?
-Rubeer
I have heard about people getting arrested for airgun silencers by the BATF.
Hi NOVRITSCH I have a question will the damper work even on an air rifle for example I have a "crossman dpms sbr"
This dude has a airsoft channel and has a company off it
Hi NOVRITSCH I was wondering if maybe you could look into making some more cadpat stuff on your website.
I did exactly the same back in 2016, a guy cut me different size of foam rings via laser and i used the same chamber pattern. first the big chamber then the smaller ones.
Will it work on an ssp1 because those things are loud as hell
montgomery mchargue no its too heavy, it wont cycle because it will push the outerbarrel into the slide
@@uwu_demon5494 oh. Anyway someone can make their own
Because it is a GBB and not a NBB it won't work as the sound doesn't come out of the barrel. It comes from the aditional air excaping and causing the blowback
@@NK_Customs well still quite a bit of gas escapes from the barrel making a lot of noise especially in my example the ssp1 if you just rack the slide it's obviously not as loud as firing it
you should have a suppressor for sale that suits the ssp1 so it became a stronger "TM mk23 "
I was trying to make something like this weeks ago to somewhat make my mosin-nagant weaker so that I could use it in some joule limited games.
1) I THINK that you still need an inner metal tube inside the suppressor to be certain that the BB's trajectory will not be "disturbed" by the foam. 😕 Long story...
2) Consider changing the channel's name... 🤔 *Novritsch TECH*? Maybe?
How do you cut the holes in the acoustic foam? Spending $25 for it to be shipped to my house isn’t worth purchasing the foam alone so would rather purchase acoustic foam in bulk and cut it myself like shown as your example
My 15 dollar airsoft suppressor can do the same, it has foam in it. + the foam can be replaced as long as you cut the next foam carefully. I'd rather see the foam inside cut in an angle, that should absorb more of the sounds, just like irl
For the us warehouse your out of adapter for the pps1 and i think supressor for ssg is also out hopefully it gets a whole new shipment
Studio sound reducing foam isn’t efficient because of its material but because of its shape
Very nice, will it work on the ssp1 too? That would bei awesome. Is there any info you can give on the realsteel shaft that is listed in the ssg24 shop but not available? Im really interested in that one.
Ye I wanna know if it would affect the ssp1
I got this a little bit ago and it doesn’t silence aeg’s at all
It just adds a ton of length and weight to the front
It is way to big for me to want to use it
Don’t get this unless you have a spring sniper
Yeah a aeg won’t get silent do to the gears making noise
Does it really work, I mean isn’t most of the sound from a BB gun coming trough the plastic rather than the nozzle
i have a air rifle, but unthreaded barrel, do you have supressors to fit to the said barrel, will you ship to sri lanka, what will be the silnecer and shipment cost will be, thanks
it reminds me curiously that of silverback which came out well before...
🤔 I'm sure he's not "making" these in his garage. Won't be shocked to find out they are in fact Silverback suppressors. Or some other Chinese variety.
idk much about airsoft or science shit so genuine question, does it only work on spring guns like your rifle ir will it work on like co2 pistols?
i was under the impression this was illegal in Canada. even on airsoft guns. Any Canadians know if they rules changed?
I made my silencer for my pallet gun works perfect 👍 no blasting sound just a thump what he did wrong with that silencer is put that inner tube with it doesn't allow the air to go anywhere in that smaller tube unless he puts a lot more holes then it would probably work better 👍
Without that tube to act as a barrel the round may impact the inside near the exit instead of exiting the suppressor
i actually thougt airsoft guns couldnt be more silenced, so really good job, u defintly impressed me. btw ill probably buy it, tbh mor because it looks cool af XD
He did it again!!!!
This wouldn't work on an AEG, but it would on an HPA... probably.
0:16 *effective
0:23 *effective
0:42 *effective
1:05 *effective*ly
1:50 *eff... oh wait, finally
3:14 relapse
Hieb ok
wow this dude looks just like novritsch
Silencer = Sound Suppressor
Sound Suppressor = Silencer
Suppressor = Many things
A suppressor could be a flash suppressor, designed to reduce muzzle flash.
A suppressor could be a car muffler, designed to reduce engine sounds and harmful byproducts.
A suppressor could be *anything* designed to reduce *anything.*
So remember,
Silencer = Sounds Suppressor. There is no difference.
But it is entirely incorrect to say "suppressor" without being specific.
It's just correct logic.
It's just being pedantic
You’re probably such a blast to have at parties
I doubt this would work on the tippmann platform as the sound is mainly mechanical