Great!! I finally found what I needed after looking thru half a dozen half-assed videos with people who were in love with their own voices! Or something? This was short and on point! Thank you very much Sir! 2CARSPRO from now on!
This really saved my life today, I had wasted 30 minutes with screw drivers because I couldnt see anything or what direction its attached! I got some thin and loosely woven cloth, slid it in between the washer and handle and just started cranking the window and the clip popped right off. Works like magic. Before installing the clip again and for the future, I widened it out a bit with pliers so it wouldnt fit so snugly, and slipped on a short ribbon so that I will only have to pull on the ribbon to remove the clip. With the clip widened a bit, it slips onto the crank shaft easily and still locks fine. Im really glad you made this video, I rate it A+. Perfect method.
I just did this and it took less than 5 minutes, once I watched how to put the clip on correctly and found the washer that had popped off. The hardest part of all this was finding a replacement window crank for my wonderful 2000 Honda Accord; finally found one shipping from Thailand as Honda discontinued the part. Your video was the most helpful of all and my new window crank snapped on and now works perfectly! This was the easiest thing I have done in a long time, thanks to your very helpful video.
OMFG thank you!!! I've put one on, but never took one off so it was really irritating puting my new door latch on hold until I got the window crank handle off. You rock, man.
Thank you so much for this video!!! I was reassembling my 2006 saturn ion after replacing the carlock actuator, and there aren't many videos on the manual crank windows. This was so helpful!
Thank you so much for this video! All the other videos made it look so easy, and it was not easy at all with 2 screwdrivers. My boyfriend popped this off in 3 seconds with your method! Prior to this video we tried another method with the screw drivers & he was hollering in frustration like I was just one of the homeboys in the shop lol I showed him this video, he grabbed a tshirt, and within 3 seconds had it off! Whew 😅 you saved me from Mr. Grumpy pants today lol he said you deserve an award for this video lol 🏆
I needed to pop the handle on my '08 Corolla so I could remove the panel and lube the gearing, watched your video and it worked like a charm. Great tip!
Thank you; my car has the washer; some cranks don't, and this wasn't covered in other UA-cam videos. I was trying to figure out exactly where the clip would be: between the washer and the handle (suspected this was the case, and it is) or further in, between the washer and the door trim (this didn't seem to make as much sense to me). Anyway, thanks! You answered my question: the clip is between the washer and the crank handle.
Another nice thing about manual windows is if you lock your keys in the car you can slide a flat piece of metal down the door like a metal yard stick and push the window crank until the window opens enough to get your hand in the window to unlock the door. It works.
Thanks alot man, Yeah so easy didn't even need to pry the washer, did it on a polo one little pull and click it was off, actually the polo's clip is integrated with the washer so comes off complete and no loose clips then snaps right back on
That was awesome 👏 omg I thought I wasn’t going to be able Put it back on I know how to take things off or take things out but I don’t know how to put it back and that was an awesome video thanks
Thank you soooooooo much! I have a 1990 Honda civic sedan and my window crank is stuck, I'm unable to roll down my window. I just ordered a replacement window regulator already. Great video! 👍
Funny story, when I was a kid my dad had an 80s car, and I really liked it. I used to sit in the front passenger seat and wind the window up and down. Well, one day I was doing that and I broke something in the window mechanism, since the window would not move anymore. Well, fast forward a decade, and i'm 16 and my dad's old car is _my_ car now. Gonna try this to see perhaps if I just stripped the teeth on the window crank.
LOL. I was going between the washer and the door and to get to the clip. Duh. Soon as you said to go between the washer and handle, mystery solved. Tks!
wszędzie pokazują demontaż, a nikt nie pokazuje montażu! Wystarczyło stuknąć, a ja już prom kosmiczny wymyślałem, jak tę zawleczkę z powrotem wcisnąć, hahaha. łapka w górę i dzięki za film.
Nice one, simple trick make it easy. Now I just realize I haven't seen a hand crank window for ages! Curiously I work in a bunch of cars including my own (x5). It's hard to pin point when was the last time I saw a "manual". LOL 😂
Thank you so much bro! Thought I had to put it back in exactly like how I took it out… Your method was 💯 times easier…whoda thought it just pops right back in… 😆
Thank you for showing me how to do this on my car. However the problem seems to be the metal piece that holds the handle. Can that be replaced or fixed?
I bought a 87 Toyota Corolla replaced the window regulator but the handle doesn't seem to fit and keeps falling out . Should I go to the salvage yard and see if I could find maybe a larger handle ? Thanks 👍
How do you repair the internals of the window crank? My 1965 Plymouth Fury, passenger window seems like the gears aren't catching enough to roll it down
Great!! I finally found what I needed after looking thru half a dozen half-assed videos with people who were in love with their own voices! Or something? This was short and on point! Thank you very much Sir! 2CARSPRO from now on!
Thanks so much for watching Eric!
This really saved my life today, I had wasted 30 minutes with screw drivers because I couldnt see anything or what direction its attached! I got some thin and loosely woven cloth, slid it in between the washer and handle and just started cranking the window and the clip popped right off. Works like magic. Before installing the clip again and for the future, I widened it out a bit with pliers so it wouldnt fit so snugly, and slipped on a short ribbon so that I will only have to pull on the ribbon to remove the clip. With the clip widened a bit, it slips onto the crank shaft easily and still locks fine. Im really glad you made this video, I rate it A+. Perfect method.
I just did this and it took less than 5 minutes, once I watched how to put the clip on correctly and found the washer that had popped off. The hardest part of all this was finding a replacement window crank for my wonderful 2000 Honda Accord; finally found one shipping from Thailand as Honda discontinued the part. Your video was the most helpful of all and my new window crank snapped on and now works perfectly! This was the easiest thing I have done in a long time, thanks to your very helpful video.
I watched a few of these videos and you’re the only one to actually put it back on, thank you for that
Thanks! I had been trying for 45 minutes to slide that clip back in. After your video I got it back on in 10 seconds.
Very nice! Thanks for watching!
I’m gonna give it a try
Thanks man! I didn't have a towel so I took my sock off lol
Thanks for watching! Very resourceful!
John Mitchell I was trying with a towel and screwdriver for like an hour until I read this. Took me 10 seconds. Thank you
Yeah I did too thanks to you
Whatever it takes,mission accomplished
I did with my t shirt. Worked in a few seconds.
OMFG thank you!!! I've put one on, but never took one off so it was really irritating puting my new door latch on hold until I got the window crank handle off. You rock, man.
Cool! Thanks for watching!
Best video about removing this handle - thanks!
Glad you enjoyed it!
Sir, thank you so much for your tip, it helped me a lot when fixing the stuck window of my wife's car. You saved my day.
Great, unique video. Well described and shown.
Please do one showing how to remove a door panel without breaking the white retainer clips.
Thank you! My husband lost the clip to my door and ordered new ones. Instead of waiting for him to do it, I watched your video and ta da lol
Sounds like you have a wife
@@reginaldofunez693 🤣😂🤣😂🤣😂
Thank you for your video
You saved the day!
Your video makes sense. Thanks to you I was able to reinstall the manual window crank on my 1974 Rover P6
Perfect! - Took 20 seconds to remove - Thank you so much!
Glad it helped!
Thanks, hadn't needed this information for 30 years, but now I do.
Glad to help!
Thank you so much for this video!!! I was reassembling my 2006 saturn ion after replacing the carlock actuator, and there aren't many videos on the manual crank windows. This was so helpful!
You're welcome! Thanks for watching!
Thank you so much for this video! All the other videos made it look so easy, and it was not easy at all with 2 screwdrivers. My boyfriend popped this off in 3 seconds with your method! Prior to this video we tried another method with the screw drivers & he was hollering in frustration like I was just one of the homeboys in the shop lol I showed him this video, he grabbed a tshirt, and within 3 seconds had it off! Whew 😅 you saved me from Mr. Grumpy pants today lol he said you deserve an award for this video lol 🏆
Haha that's awesome! Thanks so much for watching!
Very appriciated. I didn't have the special tool on me and you saved me hours of work
Very cool! Thanks for watching!
So awesome man…very well done, amazing trick, perfect execution and great vibe too!! Thank you!!
Thanks a lot!
I even got it with a plastic bag from walmart. This is seriously the easiest trick THANK YOU!
That is a great tip too! Thanks for watching!
Thanks mate you saved me from a mental melt down . God bless you
Awesome! Thanks for watching!
Absolutely mind blowing how simple, yet how many times I cranked on that red plastic insert! Hahaha many thanks bro!
Glad to help!
I needed to pop the handle on my '08 Corolla so I could remove the panel and lube the gearing, watched your video and it worked like a charm. Great tip!
Nice job!
The second I applied your method that clip popped off! Thank you for the video!
Thanks dude I was stumped on this the whole morning
No problem! Thanks for watching!
Incredibly helpful! Worked like a charm ❤❤❤
Wow so easy.
Microfiber towel worked instantly!
Thank you
Glad it helped!
Thank you; my car has the washer; some cranks don't, and this wasn't covered in other UA-cam videos. I was trying to figure out exactly where the clip would be: between the washer and the handle (suspected this was the case, and it is) or further in, between the washer and the door trim (this didn't seem to make as much sense to me). Anyway, thanks! You answered my question: the clip is between the washer and the crank handle.
Thank you for watching!
Thanks Brother,I couldn't figure how the clip was installed on the handle,your video showed it all !
No problem 👍
Life saver. Took me all of 30 secs to get the handle off on my 08 focus
Thanks for watching!
Thank you very much. I was struggling because I'd never seen it done. Now, 10 seconds max.
Yep! Thanks for watching!
Holy shit. Been trying for ages then decided to watch a vid. So freaking helpful!!!
Very cool! Thanks for watching Jasmin!
Thank you, I managed to replace mine after watching your video. It was too easy.
Great job!
Chears buddy, was near tears trying all sorts of wired and wonderful things. Didn't realise they just push back on!
Awesome! Glad to help! Thanks for watching!
Thank you for explaining in detail how to remove and replace the handle ,,, appreciated 😊
My pleasure 😊
You are so clever. Have not seen this anywhere else
Thanks so much for watching Ian!
Another nice thing about manual windows is if you lock your keys in the car you can slide a flat piece of metal down the door like a metal yard stick and push the window crank until the window opens enough to get your hand in the window to unlock the door. It works.
Thanks. I’ve been loosing my mind with my 2yold constantly opening the window. This will fix it 😂💪
No problem 👍
Please remember to orient the handle to align the same way as the other handle(s) when the window is either in the full closed or open position.
Oh lord didn't even think of this im getting ready to replace my window on my 2004 Carola this weekend good tip
Thanks for the video. It was a big help on an old Chevy!
Awesome video! I was having trouble getting the clip back on to the crank and I needed to install the clip onto the crank first. Thank you!
Glad it helped! Thanks for watching!
Thanks a lot. I just did it and it worked out perfectly on my 1996 Toyota Corolla.
Thank you so much. You just made me a PRO.❤
Thanks alot man, Yeah so easy didn't even need to pry the washer, did it on a polo one little pull and click it was off, actually the polo's clip is integrated with the washer so comes off complete and no loose clips then snaps right back on
Thank you bro you just saved my a$$! The microfiber towel worked first try!
No problem 👍Thanks for watching!
Great video as always!!!!
Thanks for watching, Excel wouldn't be the same without you!
Thank you for making this video with that information to remove Window Crank. you did really good help.
You're welcome! Thanks for watching!
Thanks Man! I was able to get the handle off and spray some lubrication in there and now the window rolls smooth as new.
Dude grate fn advice, that worked flawlessly. Thanks you my friend for taking your time and sharing this knowledge 🙂
No problem 👍
Subscribing because if this video ! Finally after two days of trying tools 😅
Thanks so much for watching and subscribing!
Thanks a bunch. Same as everyone else, I was getting my butt kicked by this clip...
I appreciate the help.
Thanks for watching!
Thank you! This turned a night of yelling profanities into an easy fix!
Nice save! Thanks for watching!
Thank you. Saved me hours on the nova
Great to hear!
Thanks bro you saved my life
Happy to help!
Found it very clear the way you explained it. Suppose it's the same in a rear door panel of a honda Fit / Jazz? Greetz from Spain, tx
Just what I needed to know.
Great job. Thanks so much
Your a blessing dude thanks S10 blazer
That was awesome 👏 omg I thought I wasn’t going to be able Put it back on I know how to take things off or take things out but I don’t know how to put it back and that was an awesome video thanks
Glad I could help! Thanks for watching!
Thank you for your time spent on this well done video. This was helpful
Thanks for watching!
Thank you, you saved me hours, worked like a dream:)
You're welcome! Thanks for watching!
This worked amazingly well! So easy!!! Thanks!!!
You're welcome!
Really appreciate the video. It will help me gettiing them back ON. Thanks.
Thanks for watching!
Thank you and thank you for not having two minutes of intro blowing your own horn!
Thanks for watching!
Very helpful indeed! "Liked" and subscribed.
Awesome! Thank you!
Thank you soooooooo much! I have a 1990 Honda civic sedan and my window crank is stuck, I'm unable to roll down my window. I just ordered a replacement window regulator already. Great video! 👍
Nice work! Thanks for watching!
Funny story, when I was a kid my dad had an 80s car, and I really liked it. I used to sit in the front passenger seat and wind the window up and down. Well, one day I was doing that and I broke something in the window mechanism, since the window would not move anymore. Well, fast forward a decade, and i'm 16 and my dad's old car is _my_ car now. Gonna try this to see perhaps if I just stripped the teeth on the window crank.
80's cars are too fun! You might have have to take apart the door and see if anything is broken. Thanks for watching!
LOL. I was going between the washer and the door and to get to the clip. Duh. Soon as you said to go between the washer and handle, mystery solved. Tks!
Glad I could help!
wszędzie pokazują demontaż, a nikt nie pokazuje montażu! Wystarczyło stuknąć, a ja już prom kosmiczny wymyślałem, jak tę zawleczkę z powrotem wcisnąć, hahaha. łapka w górę i dzięki za film.
Just open and replace lock handle of my car after seeing your video...
Thanks...
Glad I could help!
Thanks for this vid!! Worked perfectly!
Great to hear!
Thanks cobba, I wondered how to do that so easy once you know 👍
Cool! Thanks for watching Reece!
Worked like a charm. Thank you!
Great to hear!
Thanks for the video. Huge help... now I can finally take this door panel off.
Thanks for watching!
Many thanks !
That video saved alot of time and effort !
Glad to hear that!
Worked for me thanks 08 Ford Focus sedan 🙂
OMG I the same car do you still have your Ford focus 08??
Mr.OG-Lp yes
Nice one, simple trick make it easy.
Now I just realize I haven't seen a hand crank window for ages! Curiously I work in a bunch of cars including my own (x5). It's hard to pin point when was the last time I saw a "manual". LOL 😂
Thanks for watching! Everything on this car is manual and nothing has broken. Wonderful car.
Thank you so much bro! Thought I had to put it back in exactly like how I took it out…
Your method was 💯 times easier…whoda thought it just pops right back in…
😆
You're welcome! Thanks for watching!
Thank you for showing me how to do this on my car. However the problem seems to be the metal piece that holds the handle. Can that be replaced or fixed?
Nice work mate good video
Thanks for this, you just saved me some money! Legend!
That's what I am here for! Thanks for watching Logan!
Thank you about the door handle! I’m fixing my moms Geo Metro LsI lol
Perfect!
Absolutely awesome took 5 seconds
Awesome! Thanks for watching Robert!
Brilliant .just done that .such a great tip ..thanks dude .keep the helpful tips coming
Thanks so much for watching Peter!
Thanks this solved my problem. 👍🏻
Great to hear!
Great it worked , made my work impossible for me to possible , great thanks
Great 👍
I bought a 87 Toyota Corolla replaced the window regulator but the handle doesn't seem to fit and keeps falling out . Should I go to the salvage yard and see if I could find maybe a larger handle ? Thanks 👍
Neat trick! Mine just pooped right off by running a rag around the crank 👌
Wow that was easy. Thanks!
Glad it helped!
This trick is brilliant.
Grandpa taught to my Dad to me. 3 Generation trick! Thanks for watching!
Hi...does fixing window crank stop window from falling down etc?
Thankyou
Saved my life
THANK YOU SO MUCU FIGURING OUT WHERE THE OPEN SIDE just took a papeclip bent it and pulled
This worked great!!!! Thank you
Glad it helped!
Mine turned out to have a cover plate that snapped off with a hex screw behind it. Was looking everywhere for the clip
Cool! You can easily remove door card now!
Thanks, just what I needed to know to install some new speakers!
How do you repair the internals of the window crank?
My 1965 Plymouth Fury, passenger window seems like the gears aren't catching enough to roll it down
Omg that worked instantly thank you
Great to hear!
Thank you! It worked!
Thanks that was easy