Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
The Ingersoll Rand 114GQC Air Hammer ua-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind in this conversion there is also the advantage that I use the original charger for 36 v batteries because I did not use the tool battery ... the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation bosch Jigsaw 36v are few tools to compete with this I have to somehow make a movie with him and put on yotube
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
I'm no expert but I noticed that you changed the battery terminal wire but you didn't change drill motor wire. I think you should change that too because that can also be in bad shape and lithium battery's are powerful. to conduct that power you should use better wire To get the maximum output from the device. By the way that's a great restoration
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine "гарно є" :D
Bosch powertools, are very great , soilds built of tools..early years, many company 's want to copy 's the best ....now,best tools , repairs...open everything 's.... looks,same as other branded .....
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
Sir which solvent is a better cleaner for gear box parts, diesel or petrol? The one you use in ultrasonic cleaning? Can you please suggest the best cleaner? Also can you make a video of repairing the variable speed controller of this machine?
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
The Ingersoll Rand 114GQC Air Hammer ua-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Otra estupenda restauración de taladro percutor rotatorio Bosch 24V | GBH 24VF, mis respetos y saludos desde Venezuela.👍💯👍👊🤘
Muchas gracias, me alegro mucho que este video aparezca en Veneuela
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Love these early cordless drill designs. They basically mated a fat battery pack to a regular cord drill chassis. Nice finds at your shop
I think he finds them at a scrap yard but they are very well preserved and I love that
I found it form Japan power tools recycle shop.
@@gear_show Do you live in Japan?
@@danesz021 nah, i think he just flown there to buy a scrapped hammer drill to restore ;) :)
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
Raj
Your battery pack rebuilds are the best👌
Ya mind blowing
This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
Thank you very much!
@@freemanontheland24 ฟฟฟฟฟฟฟฟฟฟฟฟฟฟี . ่.อ้อี เธอฮา
ល
I like the way another drill "repairs" another drill throughout the restoration
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind
in this conversion there is also the advantage
that I use the original charger for 36 v batteries because I did not use the tool battery ...
the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation
bosch Jigsaw 36v are few tools to compete with this
I have to somehow make a movie with him and put on yotube
yes, please make a video and publish it on youtube
Some really do have a lot of time and patience. One not one of them but I do enjoy watching these videos.
Glad you like them!
Комментарий в поддержку канала и ролика, а также труда мастера который отреставрировал отбойный молоток.
Your Hammer Drill Rebuilds Are Amazing!!
Good work! Nice to see professional man's job🙂
Tohare paas sb suvidha baay bhaiya.......mauj kra....,,🥰
Wonderful restoration of a mammoth Bosch SDS Drill.
Yes, thank you
Excellent restoration bonus with battery upgrade better than factory.
Thank you! Glad you like them
Un profesional trabajando ⚒
Saludos desde Costa Rica 🇨🇷
Subscribed. My favorite toll rebuilt channel on UA-cam.
Saving the planet one battery powered tool at a time. Great job!
Yes, thank you very much :) You're always watch my video.
Great technique ☝️👍👍👍
Thank you!
You are true professional,amazing good job.
Thank you so much 😀
Best rotary hammers out there are Bosch.
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
This „Made in Germany“ hammer drill is a beast. Great to it in future times.
It sure is!
@@gear_show if you can convert it to brushless it would be even better
Best drill I ever owned!!!!
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
Thanks 👍👍
شكرا لكم اخي دائما مميز
You're welcome!
1:03, opens battery pack, finds spider nest. "There's your Problem!"
Yes, it is haha...
Amazing restoration ! - Well done - Great outcome ! :)
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
Q2⅔e³⁴⁵⁶⁷⁸⁹⁰
P
Meraviglioso lavoro
Grazie!
Sweetheart and cool content bro
Thank you so much bro :D
4:25 best part of any restoration
I'm no expert but I noticed that you changed the battery terminal wire but you didn't change drill motor wire.
I think you should change that too because that can also be in bad shape and lithium battery's are powerful. to conduct that power you should use better wire To get the maximum output from the device.
By the way that's a great restoration
Okay, great idea! thank you so much for sharing.
@@gear_show Im happy that I helped you notice your only error
My favorite part is the plastic parts cleaning
Oh, really! I think that part is not important.
Very nice Thanks you so much
I thought this channel couldn't get better, but then you added funny slow motion. Keep up the awesome work!
Bosch brand it’s very strong I like it
Good job 👍🏻
Wow fantastic work
Can u plz tell how can I get that charger on amazon
There are a lot of them on Amazon you choose it.
www.amazon.com/s?k=29.4+volt+charger&ref=nb_sb_noss_1
@@gear_show OK thanks a lot
@@gear_show can u send me a link for Indians rs it is showing dollar
Hermano,que buenos videos quisiera tener tu habilidad.
잠자기에 딱 좋은소리👍 백색소리👍
Fantastic
Simple smart restoration
Glad you like it!
im impressed that you can connect all parts at the end,Nice
I'm sure that your favorite toy was the puzzle :)
Oh new video 👍👍🤩🤩
Hope you enjoyed it!
@@gear_show for sure
أحسنت صنعنآ 👏👏👍👍
Thank you!
انته الافضل دائما
Thank you!
2:16 , that would make an excellent poster! Or wallpaper background.
Wow, I'm happy to hear that, thank you!
Well the video is in 1080p. You can just take a screenshot.
@@KISSFanDan1995 I may just, but a poster would be a real prize.
@@jdniedner that’d be awesome too.
Nicely done 👍👍👍Thanks for sharing
Thanks for watching
2:17 В идеале.
Perfect
Yes, just replace carbon brushes
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine
"гарно є" :D
It will work for many years again. 👍
the internals of the drill are in very good shape
Yeah new video
Yes
Good
Thanks
best Restoration ever
The PAYDAY Gang need to hire this man. They wouldn't have anymore drill problems if they did.
Great patience, great work! Well done! 🔥
Yes, thanks
Wowwwwww sir amazing
Thank you!
15:56
Nice sissors.
Also thanks for the information in the description and I hope you mention the prices for the parts you used in this video.
PPE is very importat! nice to see!!! Love your videos!
Yes! Thank you!
Very nice 👍 work Man 👍
Thanks 👍
Thanks 👍
Thanks 👍
👍
Finally I know how the hammer thing works
I like to see it right away to see it 👍👍👍👍👍
Yes, Glad it is right, thank you!
Excellent review. Thanks.
Very welcome!
Bosch powertools, are very great , soilds built of tools..early years, many company 's want to copy 's the best ....now,best tools , repairs...open everything 's.... looks,same as other branded .....
Good work..!
5:00 are you sure its gasoline 😜🍷
Yes, it is gasoline :)
@@gear_showno its johnny walker😂
Very creative and cute👌
Many many thanks
Super👍🏻
Thank you 👍
Awesome video as always. Greetings from the UK.
waoo mantap model ini yg kusuka,
Cái đầu kẹp mũi khoan đó mua ở đâu vậy bạn
great effort
Pls more bosch drill
Yes, I will try to find them.
@@gear_show you are the best
that is the new Bosch machine u get on Amazon then. ahah. Good work.
Thank you, it isn't new you can see the carbon brushes.
Small tool, big power. So relaxing to watch Your videos!
Esse cara e fantástico parabens
you are so good
Really good 🛠️
Thank you sir
Just wow
Thanks
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
Great work!
Thank you!
Красава мужик- cool man
Amazing !!just what I was looking for ,for many years!!!Can I re-use the original charger?
Awesome job
Thanks for the visit
Nice job
Great job
Cool stuff 👍
Thanks for the visit
O melhor de todos
Thank you!
Good work
Sir which solvent is a better cleaner for gear box parts, diesel or petrol? The one you use in ultrasonic cleaning? Can you please suggest the best cleaner? Also can you make a video of repairing the variable speed controller of this machine?
Отличная работа!
very nice video
5:03 that part sticking out of the gasoline that didn't get clean is driving my OCD crazy.
I agonized too. Two OCDs on the channel.
Brilliant
Thank you!
Beautiful dear
You are great
He must keep this space extremely clean to have found that snap ring so easily.
Good job
В целом хорошо. Но вот якорь то... Подшипники надо заменить. Коллектор с выработкой поставил.
А потом втюхают в магазине как новый.